Anyone have an extra fan motor and blade?

[Drewstang]

I was checking my trans fluid today when I heard a knocking coming from the fan shroud. I looked inbetween the radiator and shroud to see if the fan had maybe came loose. I couldn't determine what was making the noise so I took the fan off. Turns out the fan blade is cracked and looks like it had been making contact in a few places. I got a replacement from Napa, but its too big and it has no hole for the speedclip that holds the power steering resivor. I don't want to buy one from the dealer right now but that will be my last resort. If anyone has an extra, please let me know and if you could figure shipping to 40258 also. Thanks in advance.:beer:

[PSG]

I have one that has a craak in the very bottom of the shroud where it goes to the core support, you wont be able to see it in the car, if your interested ill see if i can get i price fo shipping an monday to get a total

[RoyLPita]

I have a complete fan and motor. The fan blade was transferred to this one with a good motor.

[Drewstang]

I have a complete fan and motor. The fan blade was transferred to this one with a good motor.
PM me a price with shipping. Do you take paypal?

[Drewstang]

I have one that has a craak in the very bottom of the shroud where it goes to the core support, you wont be able to see it in the car, if your interested ill see if i can get i price fo shipping an monday to get a total
My shroud is good, but my blade and motor are bad. If you're talking about the whole assembly, PM me a price with shipping.

[RoyLPita]

PM me a price with shipping. Do you take paypal?

I do not have PayPal. However, I will let you know about the price plus shipping on monday.

[RoyLPita]

You have a PM.

[John F. Russo]

See the parts section of this website under John F. Russo for my price. The shipping is close $15.

[Drewstang]

My Napa guy finally tracked down the right part. The Napa version is incorrect for our cars. Its about 1.5" too wide and does not have the speed clip for the power steering resivor. However, the Motorcraft version is dead on and even has the same warning sticker for the fan blades.

Thanks again for the help guys. This place is great.

[paheff]

You would not happen to have the part number? I too have a cracked blade and my local 'stealer' quotes $476 for the whole assy.

[fastblackmerc]

You would not happen to have the part number? I too have a cracked blade and my local 'stealer' quotes $476 for the whole assy.

Contact Ray the Dealer.

[FordNut]

They are also available on ebay. The fan controller is not included but otherwise complete.

[RoyLPita]

I stil have my whole assy. Dennis Reinhart posted that he has the blades. In fact, he is near Jacksonville for convenience purposes.

[Drewstang]

I'll go look at the box and see what it is. I know its a Motorcraft part number.

[paheff]

I stil have my whole assy. Dennis Reinhart posted that he has the blades. In fact, he is near Jacksonville for convenience purposes.

Dennis sold his last week. I am interested in anything that includes a good blade. I will probably end up buying the whole assy new since the car is not driveable the way it is. If anyone still has a blade or whole assy, please PM me.

[RoyLPita]

See posts #3 & 13. PM me.