Addco Front & Rear Sway Bar sale [Archive] - MercuryMarauder.net Forums

PDA

View Full Version : Addco Front & Rear Sway Bar sale

Dennis Reinhart

07-25-2007, 08:07 AM

I am open for this, I talked to Dan at Addco but again is there enough interest here for a min of 10 to make this work.

whoskal

07-25-2007, 08:32 AM

How much moola are we talkin???

Zack

07-25-2007, 08:34 AM

Im interested.

Raudermaster

07-25-2007, 09:54 AM

I'd be in Dennis.

Eric91Z

07-25-2007, 10:24 AM

Man, why couldn't this be next month. If the price was right I would love a set for the '03 CVPI. I love what they did to the Marauder!

chader

07-25-2007, 12:09 PM

What is this?Any prices??

Dennis Reinhart

07-25-2007, 12:13 PM

I can sell them for 325.00 a pair PS, I can not sell under MAP. I just spoke to Addco.

GrazniM

07-25-2007, 12:34 PM

Does this include all the necc. bushings / endlinks, etc. If so, I would be in for a pair.

Dennis Reinhart

07-25-2007, 12:40 PM

Does this include all the necc. bushings / endlinks, etc. If so, I would be in for a pair.

Yes it is a complete set front and rear

khc3

07-25-2007, 03:35 PM

I'm interested. Can these be installed by a ham-fisted idiot?

knine

07-25-2007, 03:40 PM

I'm interested. Can these be installed by a ham-fisted idiot?
Yes, can I ?

Dennis Reinhart

07-25-2007, 06:14 PM

I'm interested. Can these be installed by a ham-fisted idiot?

It is a easy install

MERCMAN

07-25-2007, 07:03 PM

MM2004 did it, and he is from Ky:rofl:

fairlane347

07-26-2007, 05:34 AM

Which set of addco's? Is it the small bar or the bigger tube set? That price is a bit high though.

magindat

07-27-2007, 05:14 AM

I'm already 'in' for a front!!!! Thanx Dennis!

Dennis Reinhart

07-30-2007, 10:43 AM

What I would like to do is get this started and get a list of who is in and what you want once we have a total # I will haver Jackie call you and get the CC# and order the bars the day we run your Credit cards, I appreciate this GB thank you for your continuing support.

ctrlraven

07-30-2007, 11:15 PM

A must upgrade, after installing the front/rear sway bars along with Zack's custom arms I can't believe I wanted to so long to do these, WOW what a difference!

Zack

07-31-2007, 07:13 AM

Dennis, were you able to get the ok to sell for a lower price from Addco? What is with them? Dennis:confused:

You are starting trouble. And dont you have both bars already?

The other company is exepmt from MAP undercutting because they buy thousands of bars at a time and cant be lost as a customer.

Contrary to what Tad and Pinocchio say, that is the truth.

And you say my behavior is disappointing. :puke:

Zack

07-31-2007, 07:15 AM

^^^And it posts like mine that prove how much the banned visit this site, just wait and see.

Zack

07-31-2007, 07:19 AM

And you want proof something's fishy, just call Summitracing and get them to price match. If Summit cant compete with them, do you really think everything is legit?

Zack

07-31-2007, 07:50 AM

Yup Zack, I have both bars, bought them from Dennis and his guys installed them. They are great and I want everyone to have them at the best possible price that Dennis can offer. Anything less is a failure to the members that this site is supposed to be about. If you think differently that is your perogative but you are wrong. I have no other agenda and your paranoid BS about your fellow Marauderers is unbecoming and juvenile. Dennis

Thanks.

Please change your license plate ASAP if you havent already done so.
My name on your car is a bit tacky.

Dennis Reinhart

07-31-2007, 08:08 AM

Ok lets keep it on track, the GB is on lets get it started, Dennis I have posted what the prices are you have the sway bars, this is for new members I have been getting PM's so lets get the list started.

1 set for Raudermaster (http://www.mercurymarauder.net/forums/member.php?u=5629)

Graznim said he was interested

khc3 same

Zack is in

Magindat wants a front

So lets get started and keep this on track

magindat

07-31-2007, 11:08 AM

I'm interested. Can these be installed by a ham-fisted idiot?

Yes, can I ?

Repeat after me:

"Lefty loosey, righty tighty."

There, now you can install a sway bar.

Seriously, the hardest part is holding the bar up to start the first bolt.

Dennis Reinhart

07-31-2007, 11:11 AM

sicilianmarquis

07-31-2007, 08:31 PM

add sicilian marquis, 1 set (front and rear) for the 2001 Grand MArquis ( me and dennis discussed it already )

fastblackmerc

07-31-2007, 08:35 PM

Does this include all the necc. bushings / endlinks, etc. If so, I would be in for a pair.

I believe you have to reuse only the front end links.

magindat

08-01-2007, 05:34 AM

Here is the link to Summit's Marauder bars:

http://store.summitracing.com/egnsearch.asp?Ntt=addco&N=700+4294923769+4294908269+42 94924641+115+4294906832&Ntk=KeywordSearch

They are 149.88 each.

x2 = 299.76

+tax (6%) = 317.75

+ Summit's handling fee (10.95) = 328.70

Even if Dennis charged shipping (which has not yet been mentioned), it's so close as to be next to nothing. Surely, would be within 10%.

So, for a few bucks, take your business to Summit. Feed the pockets of Corporate America. Take food from the mouth of the small businessman. Oh, and did I mention withdraw your support of MM.net by not supporting it's vendors.

Harsh? Yes. True? You bet your behind.

Grow up and be part of the solution rather than part of the problem.

Furthermore, to add confidence and teeth to my statements, I paid IN CASH IN ADVANCE IN PERSON for my front bar to help seed this GB.

I'm done.

:soap:

magindat

08-01-2007, 05:56 AM

Actually, Summit Racing is lower shipped to my door than this GB. I'm going to have to be out if the price can't be matched.

Maybe Summit's Marauder forum will provide you a wealth of knowledge and experience. Maybe Summit can walk you through an install cuz they do so many. Maybe Summit will send you an updated XCAL file FREE when you upgrade your mods....

Dennis Reinhart

08-01-2007, 06:57 AM

I am not Summit Racing, and they are not Vendors here, I have posted what I can sell the bars for and make a small proffit, now this is the best I can do.
Now I will let this run till Friday every one that would like to get in on this will need to call Jackie and place there order, and will order the bars the same day. If any of you would like to see a GB on any thing we sell or I can get for you will work hard and make it happen.

magindat

08-01-2007, 12:30 PM

Dude, IN or OUT. Just say so by Friday. Let Dennis get his best pricing for us and keep your commitment if you opt IN.

RCSignals

08-01-2007, 01:14 PM

Dude, IN or OUT. Just say so by Friday. Let Dennis get his best pricing for us and keep your commitment if you opt IN.

That I have to agree with. Buy or don't buy. Exercise your options.

Dennis Reinhart

08-01-2007, 01:25 PM

I am asking one more time to keep this on track, its my forum I am the vendor here, and if you do not want to join the GB fine, but please do not post links to non vendor web sites or there pricing, the topic is Addco GB and I will keep it on track one way or the other, I want to thank those that have stepped up for this and give Jackie a call and will have these shipped out the first of the week.

BLACKMARAUDER04

08-01-2007, 01:27 PM

After Much Debating... I Am In.

Dennis Reinhart

08-01-2007, 01:29 PM

After Much Debating... I Am In.

Thank you for the order and your support

Mesencephalon

08-01-2007, 02:14 PM

Dude, IN or OUT. Just say so by Friday. Let Dennis get his best pricing for us and keep your commitment if you opt IN.

Does the car have to be up on a lift to do this? I don't even have car ramps. If i bought these is there anyone that knows a reputable speed / performance shop in Knoxville area? Or, if I called my local FLM dealer, whom I've had work done on in the past (new AC Controller), would they install them for ___X$ you think? Is it less than an hours' work, they get about 75$ an hour i figure.

I really need a "good" mechanic or a speed / perf shop here that I can trust and that won't just see dollar signs when I walk in ...

TIA
Mes.

Raudermaster

08-01-2007, 05:08 PM

You can do them on the ground, I've helped friends do them on their vehicles before, and my buddy's Subaru on jacks, which is hard since it's a lot lower than our cars.

khc3

08-01-2007, 08:51 PM

Sorry, can't do it right now.

Peace2Peep

08-01-2007, 09:18 PM

I heard somewhere that Addco makes hollow control arms for our cars...any benefits/drawbacks to that? Which ones will we be getting here?

magindat

08-02-2007, 05:10 AM

Does the car have to be up on a lift to do this? I don't even have car ramps. If i bought these is there anyone that knows a reputable speed / performance shop in Knoxville area? Or, if I called my local FLM dealer, whom I've had work done on in the past (new AC Controller), would they install them for ___X$ you think? Is it less than an hours' work, they get about 75$ an hour i figure.

I really need a "good" mechanic or a speed / perf shop here that I can trust and that won't just see dollar signs when I walk in ...

TIA
Mes.

Ramps are 35 bucks at a FLAPS. You can definitely do them yourself.

Dennis Reinhart

08-02-2007, 08:08 AM

You can do them on the ground, I've helped friends do them on their vehicles before, and my buddy's Subaru on jacks, which is hard since it's a lot lower than our cars.

I want to thank Raudermaster for joining in on this GB, I am going to end this TOMORROW so all orders need to place by the end of day on Friday. So give Jackie a call today and tomorrow 904-276-5003, and thank all of you fro the orders and support.

fairlane347

08-02-2007, 01:02 PM

Which set of addco's? Is it the small bar or the bigger tube set? That price is a bit high though.

?????????????

Dennis Reinhart

08-02-2007, 04:42 PM

I heard somewhere that Addco makes hollow control arms for our cars...any benefits/drawbacks to that? Which ones will we be getting here?

There solid bars The sale ends on Friday.

Dennis Reinhart

08-03-2007, 09:13 AM

Today Is Friday by the close of buisness today I am going to to order the bars for those members that have called Jackie, we will run all credit cards today, and end the sale.

Dennis Reinhart

08-03-2007, 10:37 AM

WE now have two confirmed so lets keep this going we close at 5

Master

08-03-2007, 10:52 AM

So these bars really make that big a difference, eh? I was planning on calling before the end of the day to get help with a factory supercharged H-D F-150 we're working on. Maybe if you can help with that, I'll get some bars as well.

Master

08-03-2007, 10:53 AM

PS
What are the shipping costs like? I'm in Nova Scotia, remember.

DSF

Dennis Reinhart

08-03-2007, 10:55 AM

PS
What are the shipping costs like? I'm in Nova Scotia, remember.

DSF

They make a world of difference the shipping will be stout

Master

08-03-2007, 11:46 AM

Well, life's like that.

Dennis Reinhart

08-03-2007, 11:49 AM

Give Jackie a call we are leaving at 5:00 PM I hope every one has a great weekend.

Dennis Reinhart

08-03-2007, 01:49 PM

David thanks for joining in on this.

sicilianmarquis

08-03-2007, 07:39 PM

hey guys, i am one of those 2 confirmed orders, you guys should stick to your words and buy them you guys were asking for a group buy and were all for it and most backed down thats not cool, we need to all help each other out, were a very small fan-based community and we should just help each other out,

Thanks Dennis

Dennis Reinhart

08-04-2007, 07:39 AM

Dennis Reinhart

08-06-2007, 03:49 PM

All bars were ordered today and will be dropped shipped directly from Addco, there 650 bars are at the powder coater and as soon as they get them, they will ship them out.

Dennis Reinhart

08-14-2007, 11:52 AM

We sold three more sets today.:beer:

sicilianmarquis

08-14-2007, 12:33 PM

thats awsome

Master

09-05-2007, 05:02 AM

<TABLE id=HB_Mail_Container height="100%" cellSpacing=0 cellPadding=0 width="100%" border=0 UNSELECTABLE="on"><TBODY><TR height="100%" width="100%" UNSELECTABLE="on"><TD id=HB_Focus_Element vAlign=top width="100%" background="" height=250 UNSELECTABLE="off"></TD></TR><TR UNSELECTABLE="on" hb_tag="1"><TD style="FONT-SIZE: 1pt" height=1 UNSELECTABLE="on">
</TD></TR></TBODY></TABLE>
<TABLE id=HB_Mail_Container height="100%" cellSpacing=0 cellPadding=0 width="100%" border=0 UNSELECTABLE="on"><TBODY><TR height="100%" width="100%" UNSELECTABLE="on"><TD id=HB_Focus_Element vAlign=top width="100%" background="" height=250 UNSELECTABLE="off">Hey Dennis,
My bars wer drop shipped today, but when I opened the box it was "Bar", not "Bars", and the packing slip indicates this as well. Would you be able to check and see if the other bar is on the way in a seperate shipment? Hopefully, they didn't just order the front bar!
Thanks for looking into this for me.

Yours truly,
David

</TD></TR><TR UNSELECTABLE="on" hb_tag="1"><TD style="FONT-SIZE: 1pt" height=1 UNSELECTABLE="on">

</TD></TR></TBODY></TABLE>

Dennis Reinhart

09-05-2007, 08:15 AM

<TABLE id=HB_Mail_Container height="100%" cellSpacing=0 cellPadding=0 width="100%" border=0 UNSELECTABLE="on"><TBODY><TR height="100%" UNSELECTABLE="on" width="100%"><TD id=HB_Focus_Element vAlign=top width="100%" background="" height=250 UNSELECTABLE="off">

David just call Jackie she will check this for you they never ship two bars in the same box
</TD></TR><TR UNSELECTABLE="on" hb_tag="1"><TD style="FONT-SIZE: 1pt" height=1 UNSELECTABLE="on">

</TD></TR></TBODY></TABLE>
<TABLE id=HB_Mail_Container height="100%" cellSpacing=0 cellPadding=0 width="100%" border=0 UNSELECTABLE="on"><TBODY><TR height="100%" UNSELECTABLE="on" width="100%"><TD id=HB_Focus_Element vAlign=top width="100%" background="" height=250 UNSELECTABLE="off">Hey Dennis,

My bars wer drop shipped today, but when I opened the box it was "Bar", not "Bars", and the packing slip indicates this as well. Would you be able to check and see if the other bar is on the way in a seperate shipment? Hopefully, they didn't just order the front bar!

Thanks for looking into this for me.

Yours truly,

David

</TD></TR><TR UNSELECTABLE="on" hb_tag="1"><TD style="FONT-SIZE: 1pt" height=1 UNSELECTABLE="on">

</TD></TR></TBODY></TABLE>

<TABLE id=HB_Mail_Container height="100%" cellSpacing=0 cellPadding=0 width="100%" border=0 UNSELECTABLE="on"><TBODY><TR height="100%" UNSELECTABLE="on" width="100%"><TD id=HB_Focus_Element vAlign=top width="100%" background="" height=250 UNSELECTABLE="off">

David just call Jackie she will check this for you they never ship two bars in the same box
</TD></TR></TBODY></TABLE>