Help!! Missing bolts for Stallion TC...

[Sully008]

Hey all,

I bought a used PI convertor from a member and forgot to ask about any mounting hardware. My car is in the shop waiting for the tranny to go in and there's no bolts for the torque convertor. I thought that it reuses the factory ones, but apparantly the factory TC has studs.:help:

Does anybody know what size bolts need to go in? Can I get these at a FLAP or hardware store? I've been without my Marauder for 2 weeks now and I'm not sure I can handle this POS Taurus any longer.

[fastblackmerc]

Don't know the size, but you should be able to get them from eithere a FLAPS, home improvement store or hardware store. I'd use only grade 8 hardware.

You can also call PI @ Tel: (901)466-0267 or Fax: (901)466-0283 or Toll Free: (800)649-7866.

Or call DR he sells them and should know also.

[Sully008]

Don't know the size, but you should be able to get them from eithere a FLAPS, home improvement store or hardware store. I'd use only grade 8 hardware.

You can also call PI @ Tel: (901)466-0267 or Fax: (901)466-0283 or Toll Free: (800)649-7866.

Or call DR he sells them and should know also.

Thanks for the reply FBM. I missed PI by half an hour.:mad2: I guess I'll have to try calling in the morning and hopefully find some local.

[sabtaj1]

I went to the local speed shop and bought some. The package came with three bolts and nuts so I had to buy two packs. I would suggest doin it this way since the heads on the bolts would not be as thick as the ones at the hardware stores. Sorry dont have the packages anymore otherwise I couls tell you the size and thread pitch. I do know the bolts were Moroso