View Full Version : Orig. Rear Sway Bar Install
hbarrett
09-20-2007, 06:46 AM
Does anyone have the MM service manual installation procedure for the stock rear sway bar on a '04 MM?
larryo340
09-20-2007, 07:04 AM
Ask and yea shall receive. Just open this attatchement straight from the factory manual.:)
hbarrett
09-20-2007, 08:30 AM
Thanks. For some reason I thought the OEM endlink bushings had be to installed at some measured height. I guess I need to look at the hardware again.
larryo340
09-20-2007, 01:53 PM
Thanks. For some reason I thought the OEM endlink bushings had be to installed at some measured height. I guess I need to look at the hardware again.
Just don't overtighten the nuts on end links, you'll crush the bushings.
fastblackmerc
09-20-2007, 02:05 PM
Installation instructions....
Take out the old one, put in the new one.
Make sure you don't have the new one upside down.
larryo340
09-20-2007, 08:35 PM
Installation instructions....
Take out the old one, put in the new one.
Make sure you don't have the new one upside down.
And backwards ;)
Powered by vBulletin® Version 4.2.5 Copyright © 2025 vBulletin Solutions Inc. All rights reserved.