View Full Version : looking at buying steel rims for winter...size?
USN_Lifer
09-24-2007, 05:21 AM
Hello,
I found some rims but before I lay the money down I want to double check with everyone here to see if these would work.
The size is:
16X7, 5 LUG, 4 1/2" BOLT PATTERN, 54MM OFFSET
Part number is:
5W7Z-1007-AA
They are genuine P71 steel wheels. I plan to put some snow tires on before the blizzard hits :cool:
RoyLPita
09-24-2007, 05:28 AM
The part number listed is for the replacement CVPI steel wheels. I see no problems on installing these to your MM.
Egon Spengler
11-27-2007, 09:06 AM
Did you ever buy them, and did they work... I am looking into some from the dealer for $85 each... Let me know PLEASE!
stillprint
11-27-2007, 10:10 AM
Does anyone know the part number for the 06+ P71 steelies?
CRUZTAKER
11-27-2007, 05:59 PM
Sounds good to me...I ran 16x7 Grand Marquis steelies with no issues other than a slight offset issue making the wheel stick out a 1/4" or so.
http://www.mercurymarauder.net/showcase/files/6/2/6/GilWeiner.jpg
Drock96Marquis
11-27-2007, 08:36 PM
Sounds good to me...I ran 16x7 Grand Marquis steelies with no issues other than a slight offset issue making the wheel stick out a 1/4" or so.
http://www.mercurymarauder.net/showcase/files/6/2/6/GilWeiner.jpg
You must have used 98-02 panther 16" steelies
These have a lower offset than 03+ panthers, and as a result will stick out further when used on 03+ cars.
03+ panther wheels will all interchange and have the correct offset.
CRUZTAKER
11-27-2007, 08:48 PM
You must have used 98-02 panther 16" steelies
These have a lower offset than 03+ panthers, and as a result will stick out further when used on 03+ cars.
03+ panther wheels will all interchange and have the correct offset.
Actually I MUST have used the rims I took off my 98 Grand Marquis....
I may have been toasted, but not toast.
airborne_mp84
12-03-2007, 08:52 AM
Hello,
I found some rims but before I lay the money down I want to double check with everyone here to see if these would work.
The size is:
16X7, 5 LUG, 4 1/2" BOLT PATTERN, 54MM OFFSET
Part number is:
5W7Z-1007-AA
They are genuine P71 steel wheels. I plan to put some snow tires on before the blizzard hits :cool:on new 2007 CV p71 they come with stock 17 inch steel wheels
omarauder
12-03-2007, 01:47 PM
If your lucky you might find a set at the local wreckers from a late model police car....
Da Dark Jedi
12-04-2007, 02:32 PM
Zack posted his up in the "Parts for sale" with pic's.
cyclopsram
12-04-2007, 02:46 PM
The 06 and newer P71 steelies are 17 inch.
Powered by vBulletin® Version 4.2.5 Copyright © 2025 vBulletin Solutions Inc. All rights reserved.