PDA

View Full Version : Transmission Filter



crouse
10-14-2007, 10:31 AM
I installed my deep aluminum transmission pan on Thursday and changed the filter. The filter just pressed into the transmission with a seal that looked like three stacked o-rings. What keeps the filter from falling out? I noticed some posts in the bottom of the pan. Do these contact the filter to keep it in the transmission?

fastblackmerc
10-14-2007, 10:55 AM
Yes.......

crouse
10-14-2007, 02:07 PM
Cool. Thanks, Curt.

Grifter
10-14-2007, 02:30 PM
yep. its those 3 posts the pretrude from the bottom of the pan that hold you filter in place

jonroe
07-07-2008, 11:17 AM
Very important. I neglected this when switching to the FRPP deep pan and now I have had trouble with the OEM filter not staying in. People with deep pans take heed of my mis-fortune.

Marauderjack
07-07-2008, 02:27 PM
Where does the magnet go in the aluminum pan??:confused:

I hope you don't just leave it out!!:shake:

Marauderjack:burnout:

gonzo50
07-07-2008, 04:10 PM
Where does the magnet go in the aluminum pan??:confused:

I hope you don't just leave it out!!:shake:

Marauderjack:burnout:

You don't use it, the plug for the pan is magnetic and takes the place of the "in the pan" magnet.

Krytin
07-08-2008, 07:38 AM
I put the magnet over one of the posts in the bottom of the pan and that's where I always find it the next time.

Bradley G
07-08-2008, 07:45 AM
iF IT DOES NOT PRESS ON THE PLUMBING AND STAY TAUGHT SOMETHING IS WRONG. SORRY FOR THE CAPS.:P