Oil Separator

[NATEHAWK]

Does anybody have any pictures of one of these installed on a Trilogy? I just picked up one of the air/oil seperator mini filters from Home Depot and just wanted to get some suggestions on mounting it. Also i will have to pick up some 3/8 id hose to attach it because on the trilogy setup the metal tube runs from the intake to the pcv valve and a lil rubber boot connects it to the pcv valve itself. I was also told to remove the inner filter on it cause the synthetic oil would break down the filter material. Any suggestions?

[NATEHAWK]

:bump:anybody there?

[MM_BKK]

I'm not sure how synthetic oil would break down the inner filter. I don't think synthetic oil is anymore toxic than regular oil. I think removing the filter part of it would render it useless capturing oil from blow-by gas. If anything, I would think that the filter would eventually clog (doesn't all filter do that) from the oil and would not be as effective then.

Do you have a picture of the oil seperator you just bought?

[NATEHAWK]

I'm not sure how synthetic oil would break down the inner filter. I don't think synthetic oil is anymore toxic than regular oil. I think removing the filter part of it would render it useless capturing oil from blow-by gas. If anything, I would think that the filter would eventually clog (doesn't all filter do that) from the oil and would not be as effective then.

Do you have a picture of the oil seperator you just bought?



Here it is alot of mustang guys use them. Here is a link also...http://www.steeda.com/products/steeda_oil_separator.php

http://www.steeda.com/images/555-3710-lg.jpg