lug nuts and center caps

[ImpalaSlayer]

i got 2 questions.

1. where do i fid the chrome center for steelies

2. and what type of lug nut do i need for the steel wheels and what thread are they?

thanks-dave

[magindat]

Thread size is 1/2 - 20. For most tracks find an open end lug nut so they can see the stud poking through the nut.

[larryo340]

The caps are all over ebay, or you can contact ray the dealer for our MM.net prices.

the lug nuts have a shoulder on them to latch the center cap

[ImpalaSlayer]

is this what im looking for?

http://cgi.ebay.com/ebaymotors/03-04-05-06-07-Ford-Crown-Victoria-Center-Cap-Set-NEW_W0QQcmdZViewItemQQcategory Z33744QQihZ003QQitemZ130163659 022QQrdZ1QQsspagenameZWDVW

[larryo340]

is this what im looking for?

http://cgi.ebay.com/ebaymotors/03-04-05-06-07-Ford-Crown-Victoria-Center-Cap-Set-NEW_W0QQcmdZViewItemQQcategory Z33744QQihZ003QQitemZ130163659 022QQrdZ1QQsspagenameZWDVW
Yep, notice the notched part of mounting clips, those mount onto the proper lug nut shoulder. You would just need the lug nuts below to install these.
http://cgi.ebay.com/ebaymotors/Lug-Nuts-Set-of-20-Ford-Crown-Vic-Police-car-21mm-head_W0QQcmdZViewItemQQcategor yZ33749QQihZ018QQitemZ28016162 8055QQrdZ1QQsspagenameZWDVW
http://images.andale.com/f2/117/102/3932451/2007/1/20/Crown03HubCapBACK.JPG

[ImpalaSlayer]

thanks a ton larry.

[CanadaMarauder]

My center caps fit with the stock lug nuts...BUT a wheel lock will not work with caps..from my experience

[larryo340]

My center caps fit with the stock lug nuts...BUT a wheel lock will not work with caps..from my experience
True wheel locks will not work with these caps, but who would steel.... steelies:confused:
These caps lock on very tight with the correct lug nuts, I would be surprised if they stay on with nonshouldered lug nuts.