New head cooling kit

[Dennis Reinhart]

Here is a new cooling kit that I will be offering it does not require the transmission removal but you will have to take the intake off, to install this kit. I will post up more information along with pricing and instructions.

http://www.mercurymarauder.net/showcase/files/4/6/MarauderKit.jpg

http://www.mercurymarauder.net/showcase/files/4/6/mm-3.JPG

http://www.mercurymarauder.net/showcase/files/4/6/mm-4.JPG

http://www.mercurymarauder.net/showcase/files/4/6/mm-5.JPG

http://www.mercurymarauder.net/showcase/files/4/6/mm-8.JPG

[Seneca]

Head cooking kit huh? Sorry i had to say that.. :D

[Bradley G]

Harg to resist!:P
Head cooking kit huh? Sorry i had to say that.. :D

[KillJoy]

MY GOD!

Does NO ONE spell check their posts?!?!?!?

:rolleyes:

KillJoy

[Bradley G]

Dennis should fire his spelling tutor! :lol:

MY GOD!

Does NO ONE spell check their posts?!?!?!?

:rolleyes:

KillJoy

[Hotrauder]

Dennis should fire his spelling tutor! :lol:

Give Dennis a break. You won't spell that well either after your head has been cooked. :)Dennis

[Dennis Reinhart]

Head cooking kit huh? Sorry i had to say that.. :D


I guess I missed something where does it say cooking

[Glenn]

Dennis:

Please give us pricing and more information. I would very much like to see you post the installation instructions. Also, how long to install.

Thanks,

Glenn

[MERCMAN]

I guess I missed something where does it say cooking


I edited it, we have enough people cooking thier own heads without a thread entitled "new head cooking kit".. Besides, once anyone has seen your head, it would scare the bejesus out of them :rofl:

[Dennis Reinhart]

Give Dennis a break. You won't spell that well after your head has been cooked either. :)Dennis

I guess that is right Dennis, but when you get your age I am sure you slip up once in awhile, I do try and where a ball cap when I can and I did get my face and head burnt at Commerce, but it was worth it.

Glenn I will post that up tomorrow


http://www.mercurymarauder.net/showcase/files/4/6/dr.jpg

[MERCMAN]

Do you think dennis wheres underwhere? :lol:

His head was burnt? What the hell is burnt?

[MM2004]

[quote=Dennis Reinhart;549439]I do try and where a ball cap when I can and I did get my face and head burnt at Commerce, but it was worth it.

Glenn I will post that up tomorrow

Should that not be 'wear'?

Give up the pens in your pocket Dennis. :lol:

Mike.

[MM2004]

Do youthink dennis wheres underwhere? :lol:

Ummm,..

Is 'youthink' a word?

Mike. :D

[Dennis Reinhart]

Do youthink dennis wheres underwhere? :lol:

I do, but at least no one had to tell me as we did you yellow spots in the front brown in the back

[MERCMAN]

Ummm,..

Is 'youthink' a word?

Mike. :D


methinks it is :)

[Dennis Reinhart]

methinks it is :)


Of course you do, with a head like this its hard to not feel sorry for you.


http://web.iwebcenters.com/reinhartautomotive/images/I-can't-believe-he-ate-the-.jpg

[MM2004]

Of course you do, with a head like this its hard to not feel sorry for you.




Yeah?

What about this?...

http://www.mercurymarauder.net/showcase/files/2/9/8/9/Dennis2007.jpg

:laugh:

Mike.

[MERCMAN]

Omg


my Eyes,,,,my Eyes

[MERCMAN]

Dennis Reinhart
Suppprting Vendor

[Zack]

Dennis Reinhart
Suppprting Vendor

**** Hilarious

:rofl:

[MM2004]

**** Hilarious

:rofl:

This is more **** Hilarious...

Zack (http://www.mercurymarauder.net/forums/member.php?u=404) http://www.mercurymarauder.net/forums/images/statusicon/user_online.gif<SCRIPT type=text/javascript> vbmenu_register("postmenu_549466", true); </SCRIPT>
Supporting HOBBY Vendor

:D

[ctrlraven]

Sweet I smell another mod I can do myself. Dennis, def post up pricing and install information.

[MarauderSM]

Will this be part of the Nov. sale Dennis.

[magindat]

Sweet I smell another mod I can do myself. Dennis, def post up pricing and install information.


Will this be part of the Nov. sale Dennis.

The pink bunny? How much for the pink bunny?!

[MM03MOK]

The pink bunny? How much for the pink bunny?!
MINE! MINE! MINE! MINE!

[magindat]

MINE! MINE! MINE! MINE!

OK..... but the bald headed dude under the pink bunny comes with it!!!!!

[magindat]

Seriously,

Would this mod be used with a motor that already has the rear head cooling mod? Would it have additional benefit?

[Zack]

Seriously,

Would this mod be used with a motor that already has the rear head cooling mod? Would it have additional benefit?

Seriously Rich, go back to bed. :flamer:

[Bradley G]

Those better be time slips in your shirt pocket, Dennis! :P

I guess that is right Dennis, but when you get your age I am sure you slip up once in awhile, I do try and where a ball cap when I can and I did get my face and head burnt at Commerce, but it was worth it.

Glenn I will post that up tomorrow


http://www.mercurymarauder.net/showcase/files/4/6/dr.jpg

[Eric91Z]

Is that Don's cooling kit from Even Flow Cooling? If so, I have one on my car as my car was used to protype the setup. And if it is the same kit it has been found that the kit will not work as is with a Trilogy setup. Just an FYI.

The install was pretty simple and can be done in a couple hours with normal hand tools - if that is the same kit.

[Local Boy]

I'm very interested...

Will wait patiently for more info (price)

ALOHA

[magindat]

I still wanna know if it's worth ADDING this to the existing rear head cooling mod.

Yes, Zack, I'm awake!

[sailsmen]

It is only beneficial for adding to existing head cooling for Marauders that operate in reverse.

It adds a oneway check valve that prevents the coolant from shifting to the front of the driverside head. :lol:

Seriously, both kits cannot be used at the same time, each has a different install procedure and is to prevent water from pooling at the back of the head.

[KillJoy]

Is that Don's cooling kit from Even Flow Cooling?

According to the piece of paper in the Pic, yes....it IS Even Flow's Kit.

:up:

KillJoy

[magindat]

Marauders that operate in reverse. :lol:

:eek: Hey!!!! :cry:I Still WON!!! :neener:



Seriously, both kits cannot be used at the same time, each has a different install procedure and is to prevent water from pooling at the back of the head.

Thank you. :D

[Dennis Reinhart]

It is a even flow kit, Don is sending me some pictures to post and the cost will be 145.00 and we can do a group buy on these if there is enough interest,

[KillJoy]

we can do a group buy on these if there is enough interest,

How much, for how many?

KillJoy

[Eric91Z]

Just my input here: this is a very clean, well thought out kit and after spending most of a day with Don would say he has put a fair amount of thought in to this relatively simple design. And the parts, at least to me, definitely look of excellent quality.

So far no issue with the install or driving of the car since the install. And the system was SOOO easy to refill after installing. Was pretty much all full after the initial fill up - heat worked fine, no gurgling, nothing.

I am happy, but not sure it is totally effective with my current setup. Just another of those "planning for the future" things in an attempt to keep my heads cooler.

[Dennis Reinhart]

Here is a new cooling kit that I will be offering it does not require the transmission removal but you will have to take the intake off, to install this kit. I will post up more information along with pricing and instructions.

http://www.mercurymarauder.net/showcase/files/4/6/MarauderKit.jpg

http://www.mercurymarauder.net/showcase/files/4/6/mm-3.JPG

http://www.mercurymarauder.net/showcase/files/4/6/mm-4.JPG

http://www.mercurymarauder.net/showcase/files/4/6/mm-5.JPG

http://www.mercurymarauder.net/showcase/files/4/6/mm-8.JPG


Above are the install pictures

[BruteForce]

WTF? Why did you scratch out the JLT logo? I don't see any other vendors scratching out your logo.

http://www.mercurymarauder.net/showcase/files/1/7/1/3/mm-8_thumb.jpg (http://www.mercurymarauder.net/showcase/files/1/7/1/3/mm-8.jpg)

[Dennis Reinhart]

WTF? Why did you scratch out the JLT logo? I don't see any other vendors scratching out your logo.



http://www.mercurymarauder.net/showcase/files/1/7/1/3/mm-8_thumb.jpg (http://www.mercurymarauder.net/showcase/files/1/7/1/3/mm-8.jpg)


Guess again. As usual you spoke up with out knowing the facts, I never did what you accused me of, for your information those pictures were sent to my by Don and the logo was probably scratched before he did this test car. I know he never scratched it out.

[Eric91Z]

FYI - pictures were taken by Don during and after the install. So not sure who scratched them out in the picture... :dunno:

[Dennis Reinhart]

FYI - pictures were taken by Don during and after the install. So not sure who scratched them out in the picture... :dunno:


I think I said that in the above post, regardless this is a good kit and it works as well as mine it costs less and you do not have to pull the transmission.

[BruteForce]

Guess again. As usual you spoke up with out knowing the facts, I never did what you accused me of, for your information those pictures were sent to my by Don and the logo was probably scratched before he did this test car. I know he never scratched it out.

I apologize Dennis if you're not the one who zapped the logo. Whoever did either needs to upgrade those Photoshop skills or just let the reality through. :rolleyes:

[Glenn]

Dennis:

Is there an issue installing the kit on a Trilogy SC??

Glenn

[1stMerc]

I'll start the ball rolling on the group buy. Put me down for one.

[Eric91Z]

Dennis:

Is there an issue installing the kit on a Trilogy SC??

Glenn

There is a clearance issue with the Cobra lower intake manifold that is used with the Trilogy setup. It can be done and Don (of Even Flow Cooling) has done a test fit. The stock lower intake needs to be clearanced some, too, for this kit, but the Trilogy lower even more and I think a little clearancing on the head fitting too.

This is all for the passenger head fitting. The driver's side is fine.

[Dennis Reinhart]

Dennis:

Is there an issue installing the kit on a Trilogy SC??

Glenn


Glenn you have to pull the blower if you buy this and decide to do this, please call me.

[RUSTY]

Do you have to remove the stock intake in order to install this mod or is ther access?

[bigbadwolff66]

I'm just getting a look at this thread now, so let me clear up a few things:

I'll take the heat for the picture where the JLT was covered up. I was initially trying to make an arrow and some text to point to where the cooling "T" was installed at the upper radiator hose. The intake tube seemed to be the lightest part of the photo where an arrow and text would show up on. After trying a couple of different ways, the text was still too small to really read and didn't look right. I tried to "patch over it" and screwed it up. So yes, my photo shop skills up not up to par. No disrespect to JLT. ;)

The upper/lower intake does have to come off because there is a small area of casting flash that need to be clearanced where the p/s fitting goes into the head. The upper/lower intake comes off as a single assembly in @30 minutes, no heavy lifting there. Here area couple of additional benefits to this mod:
1) both D/S and P/S heads are addressed
2) Purging the air from the cooling system is ridiculously easy IF YOU FOLLOW THE INSTRUCTIONS WE PROVIDE.
3) Can be done in your driveway.
4) Heater operation remains factory stock, no change of coolant flow through the heater core.
5) Timing can be POSSIBLY be increased OR brought back in if your tuner has taken some timing out from cylinders 6,7,&8 because of additional heat in that area.

For Trilogy guys: There is no easy way to say this, but we do not recommend this kit for your application. :alone:We have installed one on a Trilogy car, but it took HEAVY clearancing on the lower intake manifold to get it to fit. We do not feel comfortable promoting this for Trilogy cars because we do not have any kind of template that we could include that would show a customer EXACTLY where to clearance and EXACTLY how deep. We need to come up with something that is custom for the Trilogy guys in the future. That being said, the 03-04 Cobra cooling head mods will fit the Trilogy cars with no issue, but it will only address the driver's side head. Passneger side would remain factory stock.

For more specific info, write-ups, and photos regarding the Marauders, you can always visit the website at
www.evenflowcooling.com (http://www.evenflowcooling.com)

We have already addressed a lot of the questions you guys may have. I'll try and answer any others.

[Dennis Reinhart]

I'm just getting a look at this thread now, so let me clear up a few things:

I'll take the heat for the picture where the JLT was covered up. I was initially trying to make an arrow and some text to point to where the cooling "T" was installed at the upper radiator hose. The intake tube seemed to be the lightest part of the photo where an arrow and text would show up on. After trying a couple of different ways, the text was still too small to really read and didn't look right. I tried to "patch over it" and screwed it up. So yes, my photo shop skills up not up to par. No disrespect to JLT. ;)

The upper/lower intake does have to come off because there is a small area of casting flash that need to be clearanced where the p/s fitting goes into the head. The upper/lower intake comes off as a single assembly in @30 minutes, no heavy lifting there. Here area couple of additional benefits to this mod:
1) both D/S and P/S heads are addressed
2) Purging the air from the cooling system is ridiculously easy IF YOU FOLLOW THE INSTRUCTIONS WE PROVIDE.
3) Can be done in your driveway.
4) Heater operation remains factory stock, no change of coolant flow through the heater core.
5) Timing can be POSSIBLY be increased OR brought back in if your tuner has taken some timing out from cylinders 6,7,&8 because of additional heat in that area.

For Trilogy guys: There is no easy way to say this, but we do not recommend this kit for your application. :alone:We have installed one on a Trilogy car, but it took HEAVY clearancing on the lower intake manifold to get it to fit. We do not feel comfortable promoting this for Trilogy cars because we do not have any kind of template that we could include that would show a customer EXACTLY where to clearance and EXACTLY how deep. We need to come up with something that is custom for the Trilogy guys in the future. That being said, the 03-04 Cobra cooling head mods will fit the Trilogy cars with no issue, but it will only address the driver's side head. Passneger side would remain factory stock.

For more specific info, write-ups, and photos regarding the Marauders, you can always visit the website at
www.evenflowcooling.com (http://www.evenflowcooling.com)

We have already addressed a lot of the questions you guys may have. I'll try and answer any others.

Thanks Don, and for the Trilogy cars they can always use the other kit

[Zack]

There is room on the passenger side for the Trilogy, just not with the fitting from Even Flow.
It needs to be a cnc machined piece with the outlet and base being one piece and the outlet on a 45 degree angle.

[Dennis Reinhart]

There is room on the passenger side for the Trilogy, just not with the fitting from Even Flow.
It needs to be a cnc machined piece with the outlet and base being one piece and the outlet on a 45 degree angle.


I would like to get this rolling, so those members that have expressed a interest if you will give Jackie a call she will take your orders and will get them out this week, for FREE shipping.

[Zack]

^^^Why did you quote my post???
:rofl:

[CRUZTAKER]

Glenn you have to pull the (trilogy) blower if you buy this and decide to do this, please call me.

OK...this is funny whether it was meant to be or not. http://www.mercurymarauder.net/showcase/files/6/2/6/aplause.gif

[sailsmen]

^^^Why did you quote my post???
:rofl:

My young grass hopper. Do not ask what cannot be answered.