Addco Sway Bars

[BLACKMARAUDER04]

Is $270 including free freight a good price for adco front and rear sway bars?

<TABLE cellSpacing=0 cellPadding=5 width="100%" border=0><TBODY><TR><TD vAlign=top width="50%">Addco's anti-sway kits are engineered to optimize the suspension on your vehicle. When one side of your vehicle's suspension compresses, or pushes down on the springs, the anti-sway bar is pulled up. The resulting twist in the bar forces the other end to pull down. This force will lift the compressed corner of the vehicle and pull down on the unloaded wheel on the other side. The result: your vehicle will lean less and handle better and more predictably! You'll have better control when maneuvering through lane changes and tight turns! Each bar is manufactured from high carbon steel, hardened, and stress-relieved. Mid and end link bushings are all urethane. Includes lifetime limited warranty!
Includes Urethane Bushings!
Gives Your Vehicle Flat, Tight Cornering!
Balances Out Understeer!
Provides Dramatic Handling Improvement!
Manufactured Under ISO9002 Regulations!
Lifetime Limited Warranty!
</TD><TD vAlign=top width="50%">Installation: Each Addco anti-sway kit is engineered to fit your specific vehicle! Detailed installation instructions and all mounting hardware are included.

Application:
03-Up Ford Crown Vic
03-Up Mercury Grand Marquis
03-Up Mercury Marauder
Rear Anti Sway Bar
1.00" Diameter Solid Bar

Front Anti Sway Bar
1.25" Diameter Solid Bar
</TD></TR></TBODY></TABLE>

[ImpalaSlayer]

got a link? sounds pretty sweet to me. venders here have the rear but not the front. well at least not on there site.

[lifespeed]

The addco front doesn't utilize the factory ball-jointed links directly to the spindle, does it? I always thought that was a far superior setup to bushings to the control arm.

[MM2004]

The addco front doesn't utilize the factory ball-jointed links directly to the spindle, does it? I always thought that was a far superior setup to bushings to the control arm.

The Addco bar bolts directly to the factory suspension components. Great setup.

Mike.

[Raudermaster]

I'm very happy with mine along with my control arms. That sounds like a good price to me.

[BLACKMARAUDER04]

Pm Me And I Will Supply The Link.

[fastblackmerc]

I bought my front and rear right from the factory in Linville Falls, N.C.

[RR|Suki]

I have a new front bar I'm selling for $100 if you want it

[Local Boy]

^^I'll take it^^^

PM sent

ALOHA

[Taemian]

Post the link please!:)

[fastblackmerc]

Post the link please!:)


Google "Addco Sway Bars" and you'll get this:

http://www.addco.net/

[Taemian]

Google "Addco Sway Bars" and you'll get this:

http://www.addco.net/

I meant to the site with that great price.....

[ImpalaSlayer]

I meant to the site with that great price.....

+1________

[stryker]

Is $270 including free freight a good price for adco front and rear sway bars?

<TABLE cellSpacing=0 cellPadding=5 width="100%" border=0><TBODY><TR><TD vAlign=top width="50%">Addco's anti-sway kits are engineered to optimize the suspension on your vehicle. When one side of your vehicle's suspension compresses, or pushes down on the springs, the anti-sway bar is pulled up. The resulting twist in the bar forces the other end to pull down. This force will lift the compressed corner of the vehicle and pull down on the unloaded wheel on the other side. The result: your vehicle will lean less and handle better and more predictably! You'll have better control when maneuvering through lane changes and tight turns! Each bar is manufactured from high carbon steel, hardened, and stress-relieved. Mid and end link bushings are all urethane. Includes lifetime limited warranty!

Includes Urethane Bushings!
Gives Your Vehicle Flat, Tight Cornering!
Balances Out Understeer!
Provides Dramatic Handling Improvement!
Manufactured Under ISO9002 Regulations!
Lifetime Limited Warranty!
</TD><TD vAlign=top width="50%">Installation: Each Addco anti-sway kit is engineered to fit your specific vehicle! Detailed installation instructions and all mounting hardware are included.

Application:
03-Up Ford Crown Vic
03-Up Mercury Grand Marquis
03-Up Mercury Marauder
Rear Anti Sway Bar
1.00" Diameter Solid Bar

Front Anti Sway Bar
1.25" Diameter Solid Bar



</TD></TR></TBODY></TABLE>
:confused: Sorry BLACKMARAUDER04 Mang but these are used or is that you're now dealer or vendor of this brand of sway bars ? please let ma know I have to replace the crap OEM ones that have my 03 Merc GMLS. :thanks:


STRYKER. :burnout:

[stryker]

Hello BLACKMARAUDER04 you still have those swaybars or is that you're dealer of addco ?


STRYKER. :burnout:

[Stranger in the Black Sedan]

Stryker, if you can wait a little while, you can have my MM stock front and rear bars really cheap when I swap to Addco's