black crown vic front corner lights

[sociopath001]

http://www.cardomain.com/member_pages/show_image.pl?bg=FFFFFFℑ=http://memimage.cardomain.net/member_images/9/web/2409000-2409999/2409606_37_full.jpg (http://www.cardomain.com/member_pages/show_image.pl?bg=FFFFFF&image=http://memimage.cardomain.net/member_images/9/web/2409000-2409999/2409606_37_full.jpg)

what do you guys think? would they fit and look good?

[magindat]

Fit, dunno for sure.

Look good, I was wondering how I might get rid of that ugly yellow reflector....

[gmtech]

Fit, dunno for sure.

Look good, I was wondering how I might get rid of that ugly yellow reflector....
Me too...hate that amber color in all that black:puke:

[SID210SA]

dont forget about your side marker light....there isnt a spot for it in that fixture...

[magindat]

dont forget about your side marker light....there isnt a spot for it in that fixture...

Marker light or clearance light? The marker is dual filament with the TS bulb.

I was wondering if that fixture used the clearance light behind that white reflector. The car HAS to have a white or amber reflector in front to satisfy DOT.

[hot-rauder]

they will fit.... CV guys put MM corner lights in all the time.

looks... idk, i like the amber. mixes it up.

http://memimage.cardomain.net/member_images/10/web/2206000-2206999/2206612_102_full.jpg

http://memimage.cardomain.net/member_images/10/web/2206000-2206999/2206612_127_full.jpg

http://memimage.cardomain.net/member_images/10/web/2206000-2206999/2206612_5_full.jpg

[ChiTownMaraud3r]

I hate how theres a gap under the headlights on crown vics.

[not5-0]

Now that we know that they will fit, where can we get them?

[CRUZTAKER]

Now that we know that they will fit, where can we get them?


Who said they fit?

Besides, what are you gonna connect that screw I see in the rear corner into?

[offroadkarter]

I hate how theres a gap under the headlights on crown vics.



Thats for air flow.....



Anyone think about just pulling out the amber one and tinting it or replacing it?

[sociopath001]

there on ebay. i saw them on a vic on cardomain heres the ebay link http://search.ebay.com/crown-victoria-corners_W0QQfkrZ1QQfnuZ1QQfsoo Z2QQfsopZ32QQkeywordZcrownQ20v ictoriaQ20corners

[hot-rauder]

Thats for air flow.....



Anyone think about just pulling out the amber one and tinting it or replacing it?


no its not.... MGM and MM do not have it... its bad design

[Raudermaster]

Thats for air flow.....



Anyone think about just pulling out the amber one and tinting it or replacing it?

You can't just "pull them out." You must put the lights into an oven and "lightly" bake them so the glue heats up and then that allows to peel apart the light and pop out the amber. A few of us (when I still had it) aero body CV's tried it, few have actually suceeded. I myself went through two sets of junk yard lights trying and failed at doing so. Maybe I had too much heat since the plastic lights actually started to warp so I just gave up on it.

[offroadkarter]

You can't just "pull them out." You must put the lights into an oven and "lightly" bake them so the glue heats up and then that allows to peel apart the light and pop out the amber. A few of us (when I still had it) aero body CV's tried it, few have actually suceeded. I myself went through two sets of junk yard lights trying and failed at doing so. Maybe I had too much heat since the plastic lights actually started to warp so I just gave up on it.



I see. Well, how bout just shooting it with a light coat of duplicolor gun metal gray?

[hot-rauder]

I see. Well, how bout just shooting it with a light coat of duplicolor gun metal gray?

it depends on the light too i guess. one of my friends took apart and painted his ranger lights black. he said it was nerve racking but he got it done. as Jarod said youare pretty likely to ruin it, but if you can monitor your stove like border patrol then i think you will be fine. what about niteshade?

http://i190.photobucket.com/albums/z302/blkmarauder/65440012.jpg

http://i190.photobucket.com/albums/z302/blkmarauder/65440020.jpg

[Raudermaster]

It's hard to just get the amber by itself, and it will probably look bad if you can tell if it was just painted over.

[wchain]

Those corners are aftermarkets that will show condensation after a year. Fit and finish is subpar.

[Raudermaster]

Adam who's Ranger is that? Those sidepipes look diesel but I doubt it has a V8 swap.

[hot-rauder]

Adam who's Ranger is that? Those sidepipes look diesel but I doubt it has a V8 swap.

its a friends 07 Ranger Base model from Maryland... met him at a Ranger meet. everything was done by him. no sense in paying someone when you can figure it out.

he has a magnaflow muffler if im not mistaken and it sounds amazing. no V8, im pretty sure its the 3.0 v6

http://i190.photobucket.com/albums/z302/blkmarauder/65440015.jpg

[Raudermaster]

What's with the traction bars?:poke: I doubt that little 3.0 puts down that much power for it to have traction problems lol.

[hot-rauder]

What's with the traction bars?:poke: I doubt that little 3.0 puts down that much power for it to have traction problems lol.

its because its lowered.... it handles and rides better. pretty sure its a 4/5 drop but couldbe a 5/7 drop. its low and fun. no body roll at any speeds. oh and he will need those traction bars because he is throwing a supercharger on it.. hmmmm i wonder who will have theres on first???:banana2: