Log in

View Full Version : Has anyone done a Marauder front end conversion on a 98-02 body Merc/Crown?



BlownMerc
12-31-2007, 11:26 AM
Was the victim of a bumper tag incident, other persons insurance footing the bill, was wondering what all had to be replaced to put a Marauder front end on my 98 Grand Marquis. I figure the grille is shaped different, didn't know if headlights, corner lights header panel and/or more had to be replaced. Or if it can even be done as a bolt-on change over. Any info will be appreciated, Thanks in advance, Andy

sailsmen
12-31-2007, 11:30 AM
I think a member by the name of Kenny has.

larryo340
12-31-2007, 12:42 PM
The fenders, all front lighting, header panel and grill, and of course the front bumper cover are all different. Good news though, the hood should be the same.

Personally I wouldn't change my front end to a Marauder front end, it's not a Marauder. My GM is a '98 also. I would love to have the front bumper cover inorder to get fog lamps, but it won't fit without replacing fenders.

FordNut
12-31-2007, 02:17 PM
Yep, that's the biggie: the fenders even have to be replaced.

RF Overlord
12-31-2007, 02:34 PM
Um....no offence intended...but are you sure you want to make a Franken-rauder?

BlownMerc
12-31-2007, 02:46 PM
Yeah, I have to replace the front bumper, wanted to put the better looking Marauder cover on. But if all of that has to be replaced, then I may just put the Crown bumper on, I hate the faux push bumper look of my Marquis. So, we'll see. It already runs like a Marauder, might as well look the look since I can't afford the real thing.

RF Overlord
12-31-2007, 02:48 PM
How do you like the AED blower? I've heard good things about them...

RoyLPita
12-31-2007, 03:11 PM
I know SID201SA has a front bumper cover and I have a rear one for sale. The choice is yours.

SID210SA
01-01-2008, 06:36 AM
I know SID201SA has a front bumper cover and I have a rear one for sale. The choice is yours.

yep.....he is right....I have a one and he has the other....we make a good team!!

RoNiN77
01-01-2008, 04:52 PM
Wonder if a '07 GM front end would fit...the new ones have those cool square fog lamps.

larryo340
01-01-2008, 08:43 PM
:laugh: now that's funny, and quite original :beer:

Um....no offence intended...but are you sure you want to make a Franken-rauder?

wchain
01-02-2008, 12:56 PM
Yep, that's the biggie: the fenders even have to be replaced.

Are you sure about that? I think fenders are identical.

I know 92-04 Fenders are the same with the exception of the antenna hole.....

So youll need the header panel, front and rear wiring harnesses, Front bumper cover, grille, headlights, side markers, fogs, reinforcement, rear bumper cover, reinforcement, tinted rear lights, finish panel, mercury logo, and roll the rear fender lips to fit the 245/55R18s.

FordNut
01-02-2008, 01:11 PM
Are you sure about that? I think fenders are identical.

I know 92-04 Fenders are the same with the exception of the antenna hole.....


Not 100% positive, but early on somebody posted that they tried to do a front end conversion on a '98 and said the corner/marker lights wouldn't fit the fenders. Apparently the earlier lights were smaller?

larryo340
01-02-2008, 01:32 PM
98 Grand Marquiseseseses have smaller lights because the bumper covers are taller, but the fender is still the same, giving the illusion of different sized fenders.
Sorry buy you are wrong, the fenders from '98-'02 are the same, '03 and up ARE different
http://i10.ebayimg.com/02/i/000/ce/31/a85f_12.JPG
now look at the '03 and up below, notice how much taller the side marker lamps are, and the rearmost part of the lamp is curved on '98-'02 and straight on the '03 and up. The area on the front of the fender on the newer cars at the marker lamp is vertical on the newer cars, and totaly different on the older cars.

http://soflacars.com/05gmlsCS/03.jpg

wchain
01-02-2008, 06:20 PM
Sorry buy you are wrong, the fenders from '98-'02 are the same, '03 and up ARE different
http://i10.ebayimg.com/02/i/000/ce/31/a85f_12.JPG
now look at the '03 and up below, notice how much tall the side marker lamps are, and the rearmost part of the lamp is curved on '98-'02 and straight on the '03 and up. The area on the front of the fender on the newer cars at the marker lamp is vertical on the newer cars, and totaly different on the older cars.

http://soflacars.com/05gmlsCS/03.jpg


I stand corrected.

92-04 Fenders for Crown victorias, and 03-04 Marquis/Marauders are the same.

larryo340
01-02-2008, 09:49 PM
I stand corrected.

92-04 Fenders for Crown victorias, and 03-04 Marquis/Marauders are the same.

No big deal, it just comes from me working for dealers for too damn long :)