View Full Version : Like a new parent looks for a pediatrician, I am looking for a good or (The Best) MM
JeffsMM
01-23-2008, 07:21 AM
Like a new parent looks for a pediatrician, I am looking for a good or (The Best) MM Mechanic in <st1:place w:st="on">South Florida</st1:place>. For the first look over and check up since adoption. Any suggestions?
Thanks
http://www.summermotors.com/marauder/r.JPG
Sure, try posting in the Sunshine State Marauders forum.
JMan
Bradley G
01-24-2008, 06:49 AM
Welcome, you hit the jackpot of Marauder wealth!
How does your car run?
How many miles r on it?
Doing Maint? get any owners service records?
Wanna make it go faster? Wazz - up???
A lot of the Maintenance is easy to do yourself or with little help.
If Making a (reliable)street thumpin' , "Torque Monster" is what you are looking for,
I'd call,"The Three Stooges" !:burnout:
JeffsMM
01-27-2008, 01:44 PM
Sorry, Been out of town over week end.
The car is 04 Runs great.
No service records at all.
I had noticed the belt pully tension seeming to bob somewhat too much and actually making a sound in doing so.
Of course my first thought was that the belt was old an needed replacement. Then I come to find out from: Vic that the card had: PERFORMANCE ENHANCING RATIO REDUCTION PULLEYS ARE ON THE ENGINE From the repair history, this back in 2004 so I asume they are still on the car. Now, I am concerned about belt size?
This car will not be a "Street Thumper"
I can do allot of stuff myself, just wanna have some one take a good look at it unfortunatly there was other stuff in the warranty repair records Vic gave me I did not like what I read.
Welcome, you hit the jackpot of Marauder wealth!
How does your car run?
How many miles r on it?
Doing Maint? get any owners service records?
Wanna make it go faster? Wazz - up???
A lot of the Maintenance is easy to do yourself or with little help.
If Making a (reliable)street thumpin' , "Torque Monster" is what you are looking for,
I'd call,"The Three Stooges" !:burnout:
Cobra25
01-27-2008, 03:10 PM
Jeff when you get a chance stop by the Tower Shops on a friday evening between 5:30 -8 pm . Show us your concerns and we can direct you in the right direction for what ever you are looking for or too do.
Bradley G
01-27-2008, 04:56 PM
The water pump pulley does not look like an underdrive.
Sorry, Been out of town over week end.
The car is 04 Runs great.
No service records at all.
I had noticed the belt pully tension seeming to bob somewhat too much and actually making a sound in doing so.
Of course my first thought was that the belt was old an needed replacement. Then I come to find out from: Vic that the card had: PERFORMANCE ENHANCING RATIO REDUCTION PULLEYS ARE ON THE ENGINE From the repair history, this back in 2004 so I asume they are still on the car. Now, I am concerned about belt size?
This car will not be a "Street Thumper"
I can do allot of stuff myself, just wanna have some one take a good look at it unfortunatly there was other stuff in the warranty repair records Vic gave me I did not like what I read.
MM2004
01-27-2008, 05:02 PM
The water pump pulley does not look like an underdrive.
+1
You beat me to it.
Mike.
Bradley G
01-27-2008, 05:36 PM
What was on the service report that concerned you?
JeffsMM
01-31-2008, 09:36 PM
Maroone Ford of Miami (FL)
7/9/04 @ 8844 miles
INITIAL INSPECTION ENGINE IS SEIZED OIL LEVEL IS FULL AND HAS AFTERMARKET OIL FILTER,PERFORMANCE ENHANCING RATIO REDUCTION PULLEYS ARE ON THE ENGINE AND MODIFIED H PIPE EXHAUST IS PRESENT,ENGINE MUSTBE REMOVED FOR FAILURE DIAG ( I really wish I knew the story behind this)
JeffsMM
02-09-2008, 08:51 PM
I have had a chance to meet the first owner of the car. He has explained everything to me. The engine had seized up on him right after he had bought the car. Ford did not cover it under warranty because he had changed the pully. He had the engine rebuilt: JE/SRP Forged Aluminum Pistons.
Moly File Fit Rings.
Eagle H Beam Pro Rods.
Ford Motor sport Forged Crank Shaft.
Clevitte Rod and Main Bearings.
Melling Oil Pump High Volume.
Melling pickup screen.
Fell Pro Upper and Lower Gasket set.
ARM Main studs.
ARP Head Studs
8 Bold Fly Plate.
Now I have allot more understanding.
Cobra25
02-10-2008, 07:36 AM
Do you plan on Joining us this year at our yearly picnic on the 23-24th. ? If so how many do you plan on coming with you ? Stop by the Tower Shops this friday if you can.
Powered by vBulletin® Version 4.2.5 Copyright © 2026 vBulletin Solutions Inc. All rights reserved.