PDA

View Full Version : FORD Ring Gear & Pinion Set 8.8" Rear Diff. 3.27:1



Warpath
04-25-2008, 09:00 AM
.

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&viewitem=&item=350052844322

NO RESERVE

Up on eBay is my take off 3.27:1 gears off of my 99 Cobra. They have about 1000 miles on them. They're in good condition. The box in the listing is actually from my 4.10 gears and not the "original" packaging. I've informed them of the discrepancy. The crush sleeve and bearing are used.

I don't have time to eBay my stuff. So, I dropped it off at a local place that sells stuff for you. All transactions are through this company. You won't be dealing with me directly. If you have questions, let me know.

Warpath
04-26-2008, 09:06 AM
tttttttttt

Stranger in the Black Sedan
04-29-2008, 08:57 AM
3.27s on a Marauder board? Mmmmkay

Warpath
04-29-2008, 09:03 AM
If you don't want them, don't buy them. There's no need to make a smart ass comment about it.

I've sold plenty of stock parts to people interested in returning their cars back to stock (to sell them). You usually get more for the aftermarket parts off the car than on it. I also posted it here in case there was any one interested in them for another vehicle - perhaps a smaller vehicle with turbos. I know it's a long shot. But, whatever.

arejayesss
04-29-2008, 09:04 AM
I've sold plenty of stock parts to people interested in returning their cars back to stock (to sell them).

Stock marauders come equipped with 3.55

Warpath
04-29-2008, 09:07 AM
These parts are off of my 99 Cobra. They are the stock parts. That's what I meant. I didn't mean to imply they were stock mm parts.

Tom Doan
04-29-2008, 12:53 PM
I put 3:27's on my car and I love them, and a whole bunch of you did to at MMV when you drove my car, but I got the torque to pull them too.