PDA

View Full Version : Need a cover for trunk organizer



Iowa Rick
05-10-2008, 09:44 PM
I just bought a used 03MM and the cover and one divider (or more) is missing. Anyone have these for sale? Thanks

RoyLPita
05-11-2008, 06:49 AM
I tried to see if those parts can be had seperately. Unfortunately, they cannot be.

Iowa Rick
05-11-2008, 11:28 AM
I guess my newness with the Marauder is showing. Apparently I do NOT have the trunk organizer that was an option on the Marauders. In looking here and searching the Net it appears the organizer I have is meant for a Golfer. It has an open top and a curvy device that is contured to keep 2 golf bags from sliding around. So I guess I need to find a local Golfer who wants to trade. I suppose it could be used to hold a couple of pony kegs, ice and a tapper. That woud be good for tailgate/trunk parties.
http://images.marketworks.com/hi/68/67754/f8mz54115a00aaa-1.jpg (http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&ih=020&sspagename=STRK%3AMEWA%3AIT&viewitem=&item=300215501426&rd=1#ebayphotohosting)

fastblackmerc
05-11-2008, 11:37 AM
I guess my newness with the Marauder is showing. Apparently I do NOT have the trunk organizer that was an option on the Marauders. In looking here and searching the Net it appears the organizer I have is meant for a Golfer. It has an open top and a curvy device that is contured to keep 2 golf bags from sliding around. So I guess I need to find a local Golfer who wants to trade. I suppose it could be used to hold a couple of pony kegs, ice and a tapper. That woud be good for tailgate/trunk parties.
http://images.marketworks.com/hi/68/67754/f8mz54115a00aaa-1.jpg (http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&ih=020&sspagename=STRK%3AMEWA%3AIT&viewitem=&item=300215501426&rd=1#ebayphotohosting)

I have one of those in my MM. I removed the golf bag holders and made two covers out of 1/2" MDF, covered them with carpet and installed handles.

FreddieH
05-11-2008, 12:21 PM
What he ^^^^^ said also. I took two lengths of wood 1x1 and sandwiched the center divider along the top edge to help support the two covers in the center. I found Charcoal material on ebay to cover the boards. The boards were purchased in two pieces from Lowes in 2 pieces 24x 36 inch pieces. I also used hot glue to mend the seems and wood glue smeered on the boards to keep the carpet flat on the board. The board is the type of board that they use on the back of furniture. it is dark brown in color. I have enough leftover carpet you can have if you PM me. All I ask is you reimberse me for shipping.

BruteForce
05-11-2008, 06:02 PM
I tried to see if those parts can be had seperately. Unfortunately, they cannot be.

The folks at Car Toys where able to order jut the lid through a Ford dealer to the replace the one they cracked in mine. It took almost eight weeks to finally get the right one and even then it did not fit right. They ended up trimming an edge and re-gluing the material. Now it fits better than the original. My old LM dealer wanted $225 just for the lid. :eek:

RoyLPita
05-11-2008, 06:07 PM
The folks at Car Toys where able to order jut the lid through a Ford dealer to the replace the one they cracked in mine. It took almost eight weeks to finally get the right one and even then it did not fit right. They ended up trimming an edge and re-gluing the material. Now it fits better than the original. My old LM dealer wanted $225 just for the lid. :eek:

You lucked out. I tried about 6 months ago and had no luck.