PDA

View Full Version : Curious about PI parts...



marauder307
08-21-2003, 10:48 AM
I'm wondering...?

Will PI parts (specifically the oil/trans coolers) bolt up to our cars?

Probably will, but I'm checking anyway...

What are the part numbers for those coolers?

RCSignals
08-21-2003, 10:10 PM
The oil cooler should work You'll need the cooler, and the adapter that goes between the oil filter and block to attach the oil lines to.
The cooler sits below the radiator, and is connected in-line in the lower radiator hose.

Even though the upper PI silicone hose is different, the rest of the silicone hoses should work as well (heater, and lower if you are using the Oil cooler.

The Marauder transmission/power steering cooler I think is the same as the one used in the PI