PDA

View Full Version : Rock Falls Raceway



Dave Johnson
06-11-2008, 12:13 PM
Anyone going to Rock Falls this weekend? I will be their on saturday hope to get in to the 11's.

crouse
06-11-2008, 05:10 PM
Welcome aboard. Tell us about your S/C Marauder. Did you buy it with the Trilogy on it or did you have it installed?

Dave Johnson
06-12-2008, 06:01 AM
I bought it new on 6/28/2003 and have been work on it little by little. I installed the Triligy s/c in 05 - Dyno – whp 389 & torque 365. Best 1/4 time was 13.241 @ 104.51 mph with street tires.Then I installed a K&N High-Flow air intake system, Stainless works headers and exhaust system, Precision 2800 stall, Built transmission, Eaton posi-unit and custom tune by Hitech - Dyno – whp 455 & torque 425. Best 1/4 time was 12.391 @ 109.79 mph with drag radials. And now I converted it to E85, bigger injectors, fuel pump and custom tune by Hitech – Dyno – whp 482 & torque 449. Hope to get in to the 11’s this weekend.

Bradley G
06-12-2008, 09:28 AM
WoW! Dave! Where you been?
Best of luck on the First one to get to the 11's on corn!:D
I bought it new on 6/28/2003 and have been work on it little by little. I installed the Triligy s/c in 05 - Dyno – whp 389 & torque 365. Best 1/4 time was 13.241 @ 104.51 mph with street tires.Then I installed a K&N High-Flow air intake system, Stainless works headers and exhaust system, Precision 2800 stall, Built transmission, Eaton posi-unit and custom tune by Hitech - Dyno – whp 455 & torque 425. Best 1/4 time was 12.391 @ 109.79 mph with drag radials. And now I converted it to E85, bigger injectors, fuel pump and custom tune by Hitech – Dyno – whp 482 & torque 449. Hope to get in to the 11’s this weekend.

Dave Johnson
06-16-2008, 06:36 AM
It was a grate day of racing at the rock this last weekend. Well the MM did it R/T .032, 60ft. 1.751, 330ft. 4.965, 1/8 7.658 @ 91.12 MPH, 1000ft. 9.999, Ό 11.979 @ 113.69.

jdando
06-16-2008, 08:56 AM
Wow!

Congrats on getting into the 11's!!!!

What diameter pulley are you running (what psi boost)?

crouse
06-16-2008, 09:59 AM
Dave,

Great numbers!

How much did the E85 conversion cost?

Thanks, Curt.

Dave Johnson
06-16-2008, 02:39 PM
Hi jdando,

The pulley is the one that came with the S/C, I think its 3.4 or 3.2 but I will have to check. The boost has been around 11 – 11 ½ psi.

Hi Curt,

The E85 conversion cost around $2,400 that’s for 60lb injectors, GT fuel pump, dual tunes, for E85 / 92 and insulation with Dyno.

crouse
06-16-2008, 07:35 PM
Let's get together sometime. I'd love to see your car. How about Sunday at the Car Craft Summer Nationals at the Minnesota State Fairgrounds.

http://www.mercurymarauder.net/forums/showthread.php?t=44759

Dave Johnson
06-19-2008, 11:07 AM
Hi Crouse,

I would like to but I have to work this weekend form noon to 10 Saturday and Sunday. What time dose the Fairgrounds open? I mite be able to meet earlier in the day.

Thanks
Dave

crouse
06-19-2008, 11:10 AM
I think gates open at 9:00 am but I know some guys get there really early to get a good parking spot. I know John (TooManyFords) will be there all three days.