*pics Of My Kooks And Random Pics*

[bigbillybbs]

Ok GUYS I got some Pics of my KOOKS install Today.
My last thread before the pics was me stressing over how QUIET the MAGANFLOWS were.
I got my new SPIN TECHS On, and they sound so F***** GOOD...
They are Disgustingly LOUD.....!!!!! And the drone isnt bad!!!!!
IF you want a loud exhaust I would Recommend SPIN TECHS...!!!
I LOVE ITTTT.........!!!!!!!!!!!

This is the last threadd..
http://www.mercurymarauder.net/forums/showthread.php?t=44690&highlight=kooks

http://i126.photobucket.com/albums/p116/hppeople123/Picture022.jpg?t=1213755447

http://i126.photobucket.com/albums/p116/hppeople123/Picture016.jpg?t=1213755489


http://i126.photobucket.com/albums/p116/hppeople123/Picture017.jpg?t=1213755513

http://i126.photobucket.com/albums/p116/hppeople123/Picture018.jpg?t=1213755538

http://i126.photobucket.com/albums/p116/hppeople123/Picture019.jpg?t=1213755558

http://i126.photobucket.com/albums/p116/hppeople123/Picture026.jpg?t=1213755582

http://i126.photobucket.com/albums/p116/hppeople123/Picture025.jpg?t=1213755603


http://i126.photobucket.com/albums/p116/hppeople123/Picture027.jpg?t=1213755670

http://i126.photobucket.com/albums/p116/hppeople123/Picture011.jpg?t=1213755748

http://i126.photobucket.com/albums/p116/hppeople123/Picture029-1.jpg?t=1213755801

[TiTo35]

Niiiiiiiiiiiiiiiiiiice

[ImpalaSlayer]

eww you took a pic with the enemy lol

looks sweet dude. mufflers are stange looking

[huot5]

in the 4th pic, the tranny linkage is awfully close to the header ( will def burn from radiant heat). and in the 5th pic, I had the shop weld some brackets to hold that X-pipe together. vibrations may slowly cause a leak in that area. let me see if I have some pics.

here ya go, those triangular looking plates were welded in four places along the X-pipe . I also put some heat sleeves on the tranny lines and tranny linkage.
http://www.nhtoc.com/photopost/data/1003/medium/Marauder_exhaust_installed_sma ller_004.jpg

[sd8683]

Looks good Billy!! I got my kooks in the mail today, I don't know when I'm gonna have the funds to get them installed though, have you ever raced that impala, if so did you win

[mmssdriver]

http://i25.photobucket.com/albums/c72/Demonkid180/DSCN5860.jpg

http://i25.photobucket.com/albums/c72/Demonkid180/DSCN5916.jpg

http://i25.photobucket.com/albums/c72/Demonkid180/DSCN5964.jpg

[bigbillybbs]

HAHAHA
That’s my best friend who lives next door to me. We have never raced. We are going to ATCO Race way in the FALL so we will see….! :D
:beer:

[bigbillybbs]

http://i25.photobucket.com/albums/c72/Demonkid180/DSCN5916.jpg


HAHAHA I wish i didnt have to work that day...! I am SO madd....!:mad::mad:

[sd8683]

http://i25.photobucket.com/albums/c72/Demonkid180/DSCN5916.jpg

Man those impalas look sweet, but the Marauder is just a little bit sweeter lol, nice car man

[bigbillybbs]

in the 4th pic, the tranny linkage is awfully close to the header ( will def burn from radiant heat). and in the 5th pic, I had the shop weld some brackets to hold that X-pipe together. vibrations may slowly cause a leak in that area. let me see if I have some pics.

here ya go, those triangular looking plates were welded in four places along the X-pipe . I also put some heat sleeves on the tranny lines and tranny linkage.
http://www.nhtoc.com/photopost/data/1003/medium/Marauder_exhaust_installed_sma ller_004.jpg

I am MOST definitely going to put a heat sleeve on the tranny lines and tranny linkage. I didnt think about that..Thanks for the advice. I am going to go back to KOOKS and see if they can weld me some brackets. BETTER be safe then SORRY..!

What do you have sprayed on the X-Pipe..?

[huot5]

since we flanged a few areas for install, I sprayed hi-temp paint on the welds, then got carried away and sprayed just about everywhere. here's a pic of the heat sleeves
http://www.nhtoc.com/photopost/data/1003/Marauder_exhaust_with_heat_shi elding_on_tranny_lines.jpg


and the flange just forward of the muffler.
http://www.nhtoc.com/photopost/data/1003/smaller_pic_exhaust_rear_half. jpg

[bigbillybbs]

AWSOME…! I really appreciate the picks and advice.:beer:

I am MOST definitely going to do some investigating into getting the X pipe mounted up a little better for LONG TERM SAFETY..
Where can I order the heat shield wrapping..
Thanks again.. O and get some Spin Techs on there if you want it louder….! Trust me its well worth it…!

[huot5]

I think the heat sleeve was from summit racing. 3/4 or 1" diameter.
try to use metal tie wraps for durability, but plastic should also work fine.
I do like the quality of the Kooks system. no leaks whatsoever. they are staying with the car. stage 8 locking bolts too, so it's too much of a pain to remove anyway.

I don't think I want it any louder, and those spin techs look funny. lol.

[DOOM]

What type of muffler are those?

[bigbillybbs]

THE COOLEST Mufflers EVER..
There Spin Tech Pro streets.
All I can say Is VERY LOUD…..!

[Canucksmarauder]

Audio clip please :D

P

[bigbillybbs]

Workenn on it,,.

[mmssdriver]

audio clips DO NOT give the spintechs justice.. You MUST hear them in person to decide if you like them. I dont know why but no camera ive seen has been able to pick up the true tone the spintechs give off.. actually i feel camera's make them sound horrible.. lol

[Blackened300a]

HAHAHA
That’s my best friend who lives next door to me. We have never raced. We are going to ATCO Race way in the FALL so we will see….! :D
:beer:


Let me know when you plan on going, Maybe Ill tag along. Who knows, we generate some interest we could spree for a track rental day and just go all out all day.

Those Headers look great!!, its on my to do list when some extra funds come my way or when I plan to blow up my credit card. How did they feel performance wise and are you planning on getting a tune after the install??

[bigbillybbs]

Let me know when you plan on going, Maybe Ill tag along. Who knows, we generate some interest we could spree for a track rental day and just go all out all day.

Those Headers look great!!, its on my to do list when some extra funds come my way or when I plan to blow up my credit card. How did they feel performance wise and are you planning on getting a tune after the install??

In the fall we are going to RENT out ATCO.
We get about 15 cars at $200 a person for 8 hours as many runs as your heart desires. I missed last Mondays meet because I had to work. You should definitely go… Once we have a official date I will let you no. (about a month in advance)

When i got the KOOKS Exhaust on I noticed a CRAZY POWER increase on the TOP end. From 60mph to 110 got SOOO much FASTER…!
The other night I took out two of my friends and they couldn’t believe how hard she pulled up there.. 0 to 60 not much different than before the exhaust..

I LOVE IT......:D:D
O and cant wait for the Marauder T-Shirts.. tank again..!

[bigbillybbs]

Mr. Reinhart tuned my x-cal 3 for the headers... I am going to dyno tune when i super charge..

[kidrobot]

Where Can I Get Spin Techs From And HoW MUCH???,,,,AND ALSO DO U HAVE A VIDEO OF HOW IT SOUNDS

[WPG_Merc]

I can't wait to get my KOOKS system installed ,I just got the XCal 2 Reinhart tune put in.
& now just waiting on the Magnaflos to come in.
Whats COOL no one has a KOOKS system or any high flo like that,All other newer Fords here are still stock :D

:canada:

[bigbillybbs]

Where Can I Get Spin Techs From And HoW MUCH???,,,,AND ALSO DO U HAVE A VIDEO OF HOW IT SOUNDS


I don’t have a video or sound clip.. But From what I have heard online the spin techs sound like crap on the computer. But in person they sound AMAZING……….! :D