keypad sticker, what does it look like.

[Aren Jay]

I spent another day, hour or so, looking for this sticker that has the keypad number on it.

I found a sticker in my trunk with my Vin# on it. Nothing else.

I found a sticker on my drivers A pillar Mav2 plus some numbers. Those numbers did not work.

Checked under the glove box but didn't see any particular door sticker, but then maybe I don't know what it looks like.

Anyone have a picture of the sticker?

[Blackened300a]

Its a small white rectangle sticker located on one of the trunk hinges.

[offroadkarter]

Its a small white rectangle sticker located on one of the trunk hinges.

Lies, i went thru this and couldnt find it anywhere! :(

[Blackened300a]

Lies, i went thru this and couldnt find it anywhere! :(

Then it must have been removed. I changed my pad code but the OEM one is still there.

[offroadkarter]

Then it must have been removed. I changed my pad code but the OEM one is still there.


Maybe the 04's didnt have it there? Or the DTR's didnt? :lol:

[carfixer]

Ford hasn't put the code on the hinge since the 90's. Some dealers put them on the hinge as part of their predelivery, but it's not common. You either need to pull the code with a Ford scanner or pull the driver's door panel and read it off the driver's door module.

[Blk Mamba]

Ford hasn't put the code on the hinge since the 90's. Some dealers put them on the hinge as part of their predelivery, but it's not common. You either need to pull the code with a Ford scanner or pull the driver's door panel and read it off the driver's door module.

pulling it off the module is only good if the code is the original, same with contacting Ford.

[Spectragod]

pulling it off the module is only good if the code is the original, same with contacting Ford.

You cannot change the factory code, it is always there.

[Blackened300a]

Ford hasn't put the code on the hinge since the 90's. Some dealers put them on the hinge as part of their predelivery, but it's not common. You either need to pull the code with a Ford scanner or pull the driver's door panel and read it off the driver's door module.

Then I must have a rare one, Ill even take a pic to prove.

[alarmguy]

Mine was in the glove box.

[jdando]

sticker in the owners manual and on the trunk hinge for me :)

[larryo340]

I thought that Ford included a small sheet with a couple stickers with keyless numbers in the owners packet. If the original owner or dealer doesn't put a sticker somewhere on the car then you have to pull door panel or use scan tool.

p.s.
:confused: Why would anyone post a picture of their sticker for the world to see the keypad code?

[Aren Jay]

What is the Mav 2 sticker?

[TKde0]

It's the PCM code.

[FordNut]

I bought both Marauders new, the stickers were in the glovebox with the owner's manual. I stuck one on each of the car's trunk hinges.

As Claude said, many dealers do this as part of the dealer prep.

If no stickers are found, pull the driver's door panel and look at the ID sticker on the door control module (DCM).

And even if you change the code to a user-defined code, the OEM code is still there.

[SILVERSURFER03]

go by ford give a tech a six pack and grt him to hook up the lap top.. thats how i got mine. then use owners manuel to change it...

[J D]

I've never seen a sticker but I will look for it when I wash the car, but I gotta say, how come no one ever mentions the little plastic card ford gives ya with the number on it?

[Davesvt2000]

Mine was in the owners manual, the sticker was on the page for changing the code..

[jgc61sr2002]

Also check in the owners manual for a plastic card with the code on it.

[Blk Mamba]

Also check in the owners manual for a plastic card with the code on it.


I carry that card in my wallet, with the warrantee info.

[LOWBUCKMM]

i did the same thing as you look everywhere for that sticker and could not find it. so the last time (not even a week ago) i was at the ford dealer i ask them where the sticker would be and they said it was on a module and would have to tear the car half apart. or just pay them $45 to hook up the scanner for three seconds and tell me the code. so thats what i did. oh and they showed me how to add a code, all you have to do is put in the oem code then push 1 and then your new number. and you will know if it takes the code when the locks lock and then unlock. and then you will have two codes that will work the oem code and the one you just put in. and yes the oem code will always be with that car unless you have to put in a new module.