Trilogy MM owners: Need a measurement please!

[Drock96Marquis]

Hey guys, I need a small favor. I need a measurement from a Trilogy-supercharged Marauder - from the front of the engine (face of the front timing cover) to the back of the supercharger case itself (right at the seam of the blower case->inlet adapter duct/elbow)


It doesn't have to be exact or anything, just close. I'd really appreciate it! :)

Thanks,
-Derek

[Glenn]

The measurement is from the rear of the water pump (electric) housing which is the front timing cover plate to the seam of the inlet on the blower case = 15 inches.

Glenn :burnout:

[Zack]

The measurement is from the rear of the water pump (electric) housing which is the front timing cover plate to the seam of the inlet on the blower case = 15 inches.

Glenn :burnout:

Thanks!

Now go measure what he asked you to measure :rofl:

[Drock96Marquis]

The measurement is from the rear of the water pump (electric) housing which is the front timing cover plate to the seam of the inlet on the blower case = 15 inches.

Glenn :burnout:



That should work, thank you Glenn! :)