Intake manifold

[lucenti]

I want to install a spacer for the intake manifold. is the origional spacer still good to use, or should i get another. 80 k miles


thanks

[fastblackmerc]

I want to install a spacer for the intake manifold. is the origional spacer still good to use, or should i get another. 80 k miles


thanks

Spacer or gasket?

You can reuse the gaskets if they aren't damaged.

[lucenti]

gasket . thanks for the reply appreciated

[RF Overlord]

When I did mine, the original gasket lost a couple of small chunks...I highly recommend using new gaskets, or at least having a spare on hand.

[ctrlraven]

To be on the safe side, buy an extra one and if you don't end up needing it just return it.

[lucenti]

Thanks for the advice, bought another gasket..

have a question though, after install as the weather is cooling, if i don't let the engine idle for a little while it will stall, and i noticed that if i rev it alittle it will stall in park (engine cold). is this common or did i miss something, btw i have a throttle body spacer installed. this was done before the spacer, and there was no problems with stalling.
thanks in advance for any help
DL