View Full Version : Ever take inventory of your parts?
Here's a quick rundown of what I have on hand: :D
4 Widened MM rims w/Drag Radials
4 Mustang Rims w/snow tires
2 upper and lower MM intakes
1 set of Kooks Headers
1 Marauder Aluminum Block
1 brand new FRPP 5.0 Big Bore Block
1 Trunk organizer
1 MM gas tank
3 MM Fuel hat assemblies
6 various fuel pumps
1 set of Brand new Megs Tips
3 Brand New sets of Floor mats
1 Vortech Blower Bracket
1 Brand New Accufab Throttle Body
3 MM timing covers
1 Powdercoated set of MM Cam covers
1 Whipple 3.4 BNIB
3 Upper and lower Cobra intakes w/ intercoolers
2 Cobra Eaton Blowers
1 Brand new set of Diamond Big Bore Pistons
1 Brand New set of Manley Rods
1 Brand new Hellion Turbo kit for my Mach 1 (minus head unit)
1 MM rear panel w/reverse lights
Various MM sensors
4 Stock MM wheels w/tires
Stock front MM brakes
Front set of MM rotors
2 MM driveshafts
Coil covers from Colex
1 new oil pump
TONS of internal engine parts
1 Brand New MM alternator
1 MM starter
1 Stock Fan shroud
1 4r70w w/8000 miles on it
Its a good thing I found an inexpensive storage unit 5 minutes from the house :up:
So whats in YOUR inventory? :D
O's Fan Rich
10-31-2008, 09:40 AM
I just have a Running Marauder and all the original stock parts.
Oh.... and a life outside of Marauders!!!!
Embassy
10-31-2008, 09:43 AM
Zack, plan on selling any of your inventory? :cool:
RoyLPita
10-31-2008, 09:43 AM
I have:
4 Bullitt wheels with Scorcher tires (for sale)
1 97 Cobra wheel with Gatorback tire (for sale)
2 sets of axle shafts (1 set for sale)
front and rear stock MM bars
rear control arms
7 16" take off 12 hole steelies (for sale)
2 front sized tires
1 rear sized tire
1 18" chrome Bullitt wheel (another spare)
2 sets of stock rear pads
1 set each of CVPI front and rear pads
1 rear pair of Command rotors
1 set stock front and rear rotors
1 stock fuel pump (New in box)
1 rear bumper cover (for sale)
1 pair of Megs delete tips
1 PCM with ignition lock and keys
stock pulleys
2 factory airboxes and tubes (one for sale with no MAF bolts and extension)
4.10 gears
1 set of unused floor mats
1 bra
2 sets of factory black coil covers (1 for sale)
1 driver window motor for older Panther
1 K&N drop in filter for Panther
1 K&N drop in filter for 86-93 5.0 Stang
94-95 GT custom h-pipe with one o2 sensor (for sale)
Cobra front and rear calipers with brackets (for sale)
87-89 beige console top w/o mirror switch hole (2-one still in bag)(for sale)
Plan on selling any of your inventory? :cool:
NOPE :flamer:
I have way to much to even think about it. From Flathead Fords to FE fords and Mod motors. To confusing!
Vortech347
10-31-2008, 10:30 AM
Enough to build another damn mustang....
SID210SA
10-31-2008, 10:37 AM
Dang Brian,
You still have that bumper cover?
hidperf
10-31-2008, 10:39 AM
I can't list everything because I don't have the time but here is some:
1965 Mustang rolling chassis that has all the paint and body work complete + all the glass and w/strip and numerous misc. parts to begin assembly.
372cid windsor w/ aussie heads 550hp
Clutch-Turbo 400
All the parts to put the above engine and trans in a fox body Ford.
3 complete and running 2.2/2.3 Honda engines waiting for good cars to put them in
And about 10k worth of inventory from my shop I used to have. Honestly, I'm going to spend the next two month listing it all on eBay just to get it out of the house.
Shora
10-31-2008, 11:26 AM
I won't begin to list everything because I don't have the time but here is some:
Looks like you changed your mind mid sentence. Let us know when they hit the Bay.
sd8683
10-31-2008, 11:52 AM
Here's my list
Kook' header's
Flowmaster super 44's
4 inch delete tip's
Hurst line lock's
Stainless steel brakeline's
Avic F90
Napa Adaptive1 front brake pad's
Upper intake
Intake spacer
Cam cover's
Martyo fender badges
Colex grille and trunk badges
Cobra fender badges
fastblackmerc
10-31-2008, 12:08 PM
Stock 3.55's
Stock rear end cover
Stock frt & rear swaybars
Stock coil covers
Short over head console
"A", "B", & "C" pillar trim
All four door sill covers
Upper & lower intake
2 x stock TB's
Instrument panel trim
High mounted stop light
Stock subwoofer
Stock 6-CD changer
2x widened MM wheels
1x bent MM wheel
Powdered coated coolant crossover
Powdered coated thermostat assembly
Stock radio
2x sets front calipers
1 set rear calipers
sd8683
10-31-2008, 12:17 PM
Stock 3.55's
Stock rear end cover
Stock frt & rear swaybars
Stock coil covers
Short over head console
"A", "B", & "C" pillar trim
All four door sill covers
Upper & lower intake
2 x stock TB's
Instrument panel trim
High mounted stop light
Stock subwoofer
Stock 6-CD changer
2x widened MM wheels
1x bent MM wheel
Powdered coated coolant crossover
Powdered coated thermostat assembly
Stock radio
2x sets front calipers
1 set rear calipers
You wanna sell me your lower intake:)
justbob
10-31-2008, 12:22 PM
OK Zack i'll give ya $1000.00 for the trans, widened wheels, floormats, and the kooks.:lol:
Embassy
10-31-2008, 12:27 PM
You wanna sell me your lower intake:)
Beat me too it. :D
I need one too.
fastblackmerc
10-31-2008, 12:27 PM
You wanna sell me your lower intake:)
After I get my stock one "finished".
OK Zack i'll give ya $1000.00 for the trans, widened wheels, floormats, and the kooks.:lol:
Why so much??? :confused:
sd8683
10-31-2008, 12:32 PM
After I get my stock one "finished".
Sounds good, keep me posted
fastblackmerc
10-31-2008, 12:33 PM
Sounds good, keep me posted
Will do. Hoping to get it done by the end of the year.
Fourth Horseman
10-31-2008, 01:32 PM
I've never taken inventory, but I've filled a corner of my Dad's garage with stock parts I've taken off in favor of after-market goodies. Points to my dad for being cool enough to let me use his space to store my junk^H^H^H^H stuff.
He tells me that soon I'll have enough parts to build a second Marauder. :D
bigmerc2003
10-31-2008, 01:39 PM
Too much junk to list but i do have some suprises:
big DANA axles from an old ford high-boy
transfer cases
'65 352 FE with closed chamber high compression heads
'65 289 hipo block and crank and pistons
4.6L SOHC complete engine (but I need a rear main bearing cap if someone has a spare from a blown block??)
various heads and intakes, favorite is a V-6 buick canadian nascar intake that is real neat looking
lot a parts for a one day project
Drewstang
10-31-2008, 01:55 PM
Too many Fox Body Mustang parts to list.
351W shortblock
ProTopline aluminum heads
94-95 Mustang spindles
99-04 Mustang calipers
94-98 Mustang rear caliper brackets
2 5.0 long blocks
A bunch of stock Marauder parts
New headlights and corners for the Marauder
2 16" 03 P71 wheels
2 94-95 Cobra wheels
94-95 Cobra airbag delete
94-98 Mustang rear seat delete
GT40 iron heads
94-98 Mustang clear corners
94-98 Mustang roll bar
Scrothe Harness for the Mustang
hot-rauder
10-31-2008, 02:02 PM
stock set of MM Meg tips downstairs.... for sale
and my brother has pretty everything that ever made a 1990 Ranger ever run... plus countless bicycle parts from his days building custom lowrider bikes.
RoyLPita
10-31-2008, 02:42 PM
Dang Brian,
You still have that bumper cover?
Yup. The pics that I send explain it all.
RoyLPita
10-31-2008, 02:44 PM
Too many Fox Body Mustang parts to list.
351W shortblock
ProTopline aluminum heads
94-95 Mustang spindles
99-04 Mustang calipers
94-98 Mustang rear caliper brackets
2 5.0 long blocks
A bunch of stock Marauder parts
New headlights and corners for the Marauder
2 16" 03 P71 wheels
2 94-95 Cobra wheels
94-95 Cobra airbag delete
94-98 Mustang rear seat delete
GT40 iron heads
94-98 Mustang clear corners
94-98 Mustang roll bar
Scrothe Harness for the Mustang
I didn't add this to my list but I could for a 94-95 Stang:
94-95 GT custom h-pipe with one o2 sensor (for sale)
Cobra front and rear calipers with brackets (for sale)
ImpalaSlayer
10-31-2008, 02:52 PM
1 black rear facia
1 set of stock sway bars
1 even flow kit
1 set or winter wheels
1 full sized spare
1 stock trans pan
1 set of valve covers
1 one upper intake
1 3500 stall convertor
1 set of 3:55 gears
1 qt of silver birch paint
1 stock shifter
1 set of stainless braided brake likes
3 stock from emblems
1 set of 300a coil covers
1 set of ford racing coil covers
i think thats it for mm stuff
Holy cow you folks got some nice 'stuff' just taking up space.
sd8683
10-31-2008, 03:07 PM
1 black rear facia
1 set of stock sway bars
1 even flow kit
1 set or winter wheels
1 full sized spare
1 stock trans pan
1 set of valve covers
1 one upper intake
1 3500 stall convertor
1 set of 3:55 gears
1 qt of silver birch paint
1 stock shifter
1 set of stainless braided brake likes
3 stock from emblems
1 set of 300a coil covers
1 set of ford racing coil covers
i think thats it for mm stuff
There's one thing that you forgot to put on your list..... Oh that's right:)
Sorry Dave, I had to do it
ImpalaSlayer
10-31-2008, 03:09 PM
not on the list cuz it aint in my inventory yet
not on the list cuz it aint in my inventory yet
HAH! Dont expect the blower you ordered over a month ago (that was publicly announced shipping out that week, then later deleted) to arrive anytime soon.
Egon Spengler
10-31-2008, 07:08 PM
I hate you lol... just kidding... jealous
Here's a quick rundown of what I have on hand: :D
4 Widened MM rims w/Drag Radials
4 Mustang Rims w/snow tires
2 upper and lower MM intakes
1 set of Kooks Headers
1 Marauder Aluminum Block
1 brand new FRPP 5.0 Big Bore Block
1 Trunk organizer
1 MM gas tank
3 MM Fuel hat assemblies
6 various fuel pumps
1 set of Brand new Megs Tips
3 Brand New sets of Floor mats
1 Vortech Blower Bracket
1 Brand New Accufab Throttle Body
3 MM timing covers
1 Powdercoated set of MM Cam covers
1 Whipple 3.4 BNIB
3 Upper and lower Cobra intakes w/ intercoolers
2 Cobra Eaton Blowers
1 Brand new set of Diamond Big Bore Pistons
1 Brand New set of Manley Rods
1 Brand new Hellion Turbo kit for my Mach 1 (minus head unit)
1 MM rear panel w/reverse lights
Various MM sensors
4 Stock MM wheels w/tires
Stock front MM brakes
Front set of MM rotors
2 MM driveshafts
Coil covers from Colex
1 new oil pump
TONS of internal engine parts
1 Brand New MM alternator
1 MM starter
1 Stock Fan shroud
1 4r70w w/8000 miles on it
Its a good thing I found an inexpensive storage unit 5 minutes from the house :up:
So whats in YOUR inventory? :D
ctrlraven
10-31-2008, 10:44 PM
I know there is other stuff but having stuff at my shop, storage and my garage I can't think of everything off hand right now lol
1 stock front sway bar
1 stock rear sway bar
2 stock upper & lower control arms
1 stock 4R75W trans pan
1 stock MM intake air box/tube
2 235/70-16 Winter tires mounted on 16" cvpi steelies
2 255/70-16 Winter tires mounted on 16" cvpi steelies
4 16" cvpi steelies new take offs
2 misc 215/60-16 winter tires
2 bfg 255/50-16 drag radials mounted on 16" cvpi steelies
1 T/A rear diff cover
1 rear diff stud kit
1 set of Ford Racing 4.10 gears
1 set of Cobra clutch paks
2 sets of axle bearings
1 aftermarket wiper motor with bad ford factory wiper control module
5 new oil filters
5 cases (of 12 quarts) of 5w-20 Amsoil engine oil
3 cases (of 12 quarts) of Castrol Mercon V trans fluid
1 factory SB hood
1 set of stock front rotors (turned)
I wonder why my clients ask me if I sell tires lol.
http://i11.photobucket.com/albums/a164/ctrlraven/th_DSCF1423Medium.jpg (http://s11.photobucket.com/albums/a164/ctrlraven/?action=view¤t=DSCF1423Medium.jpg)
chader
11-01-2008, 07:43 AM
if any of you want to part with some wheels let me know,It would probly be cheaper then finding someone to refinish mine?
CRUZTAKER
11-01-2008, 08:12 PM
Hey Zack....would you want to sell a pair of those widened rims?
Sure would save me the time of sending mine out....and those would only need to go to the powdercoater.
Hey Zack....would you want to sell a pair of those widened rims?
Sure would save me the time of sending mine out....and those would only need to go to the powdercoater.
PM sent this morning ;)... and denied!
DEFYANT
11-02-2008, 07:01 AM
My inventory looks like this:
TOO MUCH *****
Motorhead350
11-03-2008, 05:13 PM
As far as the Marauder goes...
1 Trunk organizer
3 factory Marauder rims (2 of which JustBob has in his posession)
1 tuner
1 window sticker
1 bottle of Procharger oil
1 jacket
1 banner
1 stock antifreeze box
1 stock air filer/intake
1 set of stock control arms
1 set of stock injectors
4 stock cats with header dumpers
endless amounts of bolts on the floor
The Chevys have much more
Powered by vBulletin® Version 4.2.5 Copyright © 2025 vBulletin Solutions Inc. All rights reserved.