Dennis Reinhart
11-13-2008, 05:52 PM
Well I worked on this today, it belongs to a local man that had a previous tune, from another shop. So I started with that as a base line and yes it made over 400 RWT and very close to the same in RWHP, but the truck has the stock 3V 5.4 motor and it was running 12.5 AF, which to me is way to lean, so I got the AF down to 11.8 added a little timing and the power was ok not as high but for sure a lot safer, and the owner said the car never went into lockup, we fixed all that and he was happy which is what I strive for.
http://www.mercurymarauder.net/showcase/files/4/6/IMG_1909.jpg
http://www.mercurymarauder.net/showcase/files/4/6/IMG_1910.jpg
http://www.mercurymarauder.net/showcase/files/4/6/IMG_1911.jpg
Here is the before and after dyno runs.
http://www.mercurymarauder.net/showcase/files/4/6/07Hraleydyno.jpg
Below is the new Griffith 03 Cobra upgraded inner cooler, we are installing on a 03 convertible, I will have some pictures of that tomorrow along with masters N/A dyno pulls.
http://www.mercurymarauder.net/showcase/files/4/6/IMG_1913.jpg
http://www.mercurymarauder.net/showcase/files/4/6/IMG_1914.jpg
http://www.mercurymarauder.net/showcase/files/4/6/IMG_1909.jpg
http://www.mercurymarauder.net/showcase/files/4/6/IMG_1910.jpg
http://www.mercurymarauder.net/showcase/files/4/6/IMG_1911.jpg
Here is the before and after dyno runs.
http://www.mercurymarauder.net/showcase/files/4/6/07Hraleydyno.jpg
Below is the new Griffith 03 Cobra upgraded inner cooler, we are installing on a 03 convertible, I will have some pictures of that tomorrow along with masters N/A dyno pulls.
http://www.mercurymarauder.net/showcase/files/4/6/IMG_1913.jpg
http://www.mercurymarauder.net/showcase/files/4/6/IMG_1914.jpg