PDA

View Full Version : Stock with drainplug?



DTRMiguel
04-13-2009, 06:08 AM
I hate the fact that the transmissions dont have drain plugs :mad2: so i was wondering would it be a good idea to add a drain plug on the "nipple" (lowest part) of the trans pan? Has anyone ever done this?:help:

fastblackmerc
04-13-2009, 06:36 AM
Why to the work when you can get a Ford "truck" pan that already has it installed?

DTRMiguel
04-13-2009, 06:38 AM
Why to the work when you can get a Ford "truck" pan that already has it installed?

The F-150 pan?

fastblackmerc
04-13-2009, 07:49 AM
I believe so...

Might even find the P/N if you search.....

ImpalaSlayer
04-13-2009, 10:35 AM
i can put a drain in my factory one if you want mike then just give me your take off when you pull it off.

fastblackmerc
04-13-2009, 10:58 AM
E350 pan, for 4.6 motor, your local dealership has it or can order it.

DTRMiguel
04-13-2009, 11:03 AM
E350 pan, for 4.6 motor, your local dealership has it or can order it.

Sank you sire :bows:

ctrlraven
04-13-2009, 11:27 AM
Get an Art Carr Deep trans pan, increases the fluid holding and has the drain plug in it.

Don't flame me but I bought mine from Reinhart, comes with new filter and correct bolt hole plugged for 4R70W use.

fastblackmerc
04-13-2009, 11:32 AM
Get an Art Carr Deep trans pan, increases the fluid holding and has the drain plug in it.

Don't flame me but I bought mine from Reinhart, comes with new filter and correct bolt hole plugged for 4R70W use.

That is what I'd do.

vkirkend
04-13-2009, 01:57 PM
That is what I'd do.

That's what i did.....

RF Overlord
04-13-2009, 02:49 PM
In the FAQ, under "Popular Part Numbers"

Transmission Pan w/Drain Plug - F8UZ-7A194-AA

Marauderjack
04-13-2009, 02:59 PM
I bought a deep cast aluminum pan and it made NO DIFFERENCE in fluid temps!!!:shake:

It takes a little longer to reach operating temp because of the extra 2 quarts or so but I wouldn't waste the money on one when the Econoline pan can be had with a drain for $80.00 or so!!:beer:

Spend your $$$'s elsewhere!!:D

RF Overlord
04-13-2009, 04:32 PM
'jack is right. This car has a thermostatically-controlled cooler, so a finned aluminium pan will basically just give you the extra capacity, not extra cooling.

ctrlraven
04-13-2009, 07:18 PM
That's the main reason why I bought mine for the extra capacity and the drain plug.

Just changed out 5 quarts of trans fluid this weekend, how I love the drain plug.

Zack
04-13-2009, 07:21 PM
Why would anyone order a $45 pan with a drain plug when you can put one in yourself for $5.00 and drill one lousy hole?

DTRMiguel
04-13-2009, 07:22 PM
Why would anyone order a $45 pan with a drain plug when you can put one in yourself for $5.00 and drill one lousy hole?

I R doing this. Dave ill be calling you tomorrow
Thanks Zack