auto temp control broke

[burt ragio]

Any idea what is up with my heater/AC ? It started this winter with the heater set at 69 or 90 degree same temp would come out hot hot. Now using the AC the air only comes out the floor vents only. It even seems to be mixed with a little heat as if the heater is working with the AC. What could be the problem & cost for repair at the dealer ?
Ticked off I would rather spend money on mods.

[fastblackmerc]

Any idea what is up with my heater/AC ? It started this winter with the heater set at 69 or 90 degree same temp would come out hot hot. Now using the AC the air only comes out the floor vents only. It even seems to be mixed with a little heat as if the heater is working with the AC. What could be the problem & cost for repair at the dealer ?
Ticked off I would rather spend money on mods.

Search for the fix. I believe it's quite easy.

[burt ragio]

Thanks bud don't know what this site would do without all your great info.

[RF Overlord]

Sounds like the blend door...unfortunately it's not a simple or cheap repair.

[fastblackmerc]

Thanks bud don't know what this site would do without all your great info.

No problem. Glad to be of service!

[burt ragio]

Sounds like the blend door...unfortunately it's not a simple or cheap repair.

Thanks for the response. I will pull things apart and see if I can make a repair on the blender door.

[Marauderjack]

I haven't ever done the blend door motor but I understand you will probably.....:argue::mad2: :argue: :mad2: :censor::help:

[xopher]

Before you tear apart half your car, try this:

http://www.p71interceptor.com/eatcswap/selftest.html

:laugh:

Thanks bud don't know what this site would do without all your great info.
I hate it when people advise to search without any other advice or input. What a waste. I want my electrons back.

[fastblackmerc]

I hate it when people advise to search without any other advice or input. What a waste. I want my electrons back.

Well don't let the door hit you in your a$$ on the way out.

Not using the search function is the easy way out......

[johnjamis]

It is likely your control head. Swap it out to be sure and repair or replace it first.