2.5 Stainless Steel Mandrel Tail Pipes

[NATEHAWK]

I thought a company in GA Exotic Ehaust was selling these as a kit for us? Im looking to get a set....

[ctrlraven]

www.mandrelbendingsolutions.co m

Mandrel Bending Solutions
2539 Mountain Road Pasadena, MD 21122
(410)-360-7105
Call and ask to speak to Greg, tell him you know Chris with the Silver Marauder. They don't sell kits but Greg does wonders with mandrel bent exhaust.

[NATEHAWK]

Thanks Birdman

[merc]

http://www.mandrelbendingsolutions.co m/servlet/the-589/rolled/Detail

http://www.mandrelbendingsolutions.co m/catalog/P1000210.JPG

[Joe Walsh]

If you are looking for 2-1/2" over the axle exhaust pipes, I thought that Bryan/'muffrauder' made them at the new shop where he works.
Todd/TAF did offer them back in the day...:(

Here is the old thread with the information:

http://www.mercurymarauder.net/forums/showthread.php?t=44285

[ctrlraven]

Merc he is looking for the tail pipes (over axle piping).

[RR|Suki]

just find a good local exhaust shop, it really isn't rocket science, other than headers, my whole exhaust was done at a local shop for next to nothing :D

[merc]

Merc he is looking for the tail pipes (over axle piping).

Oh ok, but I like the price and looks of the exhaust tips they offer. Are you near there shop?

[NATEHAWK]

Yea I got a shop that can do the work but they don't do mandrel bending. Is it really that much difference?

[Joe Walsh]

Mandrel bending is better because a consistent diameter is maintained through the entire curve of piping.
There are no crimps or wrinkles in the pipe like you see on OEM systems.

[O's Fan Rich]

Yea I got a shop that can do the work but they don't do mandrel bending. Is it really that much difference?


^^^^^What Joe Said^^^^^

[RR|Suki]

after the mufflers.... I'd have to see some numbers to really care what happens after the mufflers especially on a blown car

[ctrlraven]

Yea I got a shop that can do the work but they don't do mandrel bending. Is it really that much difference?
Give Greg a call he can better explain and possible give a quote for the work. I will be getting him to do my full exhaust and he is also the contact I was dealing with to get the possible cat-back exhaust kit made up for our cars but need the money to get mine done so they can take measurements and all.

[NATEHAWK]

Give Greg a call he can better explain explains and possible quote for the work. I will be getting him to do my full exhaust and he is also the contact I was dealing with to get the possible cat-back exhaust kit made up for our cars but need the money to get mine done so they can take measurements and all.

I called Greg today he wasnt in. I will give him a call tomorrow.

[VictorCrown]

Looking for a place to make a custom H-Pipe and this looks like IT. Thanks for the link, I'll be calling them. It is to go behind Stainless Works Headers and a pair of Magnaflow Catalytic Converters.

Thx!

Vic