how do I remove the fuel rail

[james1986fox]

I need to replace my fuel injectors on bank 1 side of the motor and I need to know the process of doing this

[ImpalaSlayer]

well if bank one is the passenger its a piece of cake. if its the drivers its also easy but takes longer.

follow the directions in this thread, they should help you.

http://www.mercurymarauder.net/forums/showthread.php?t=53488&highlight=naz+intake

[GetMeMyStogie]

Before unbolting the fuel rails, don't forget to:
1. Turn off the fuel pump switch in the trunk;
2. Release the pressure in the fuel rails before unbolting them. There's a shrader valve (like on a bicycle tire) on one of the fuel rails which you depress to release the pressure - place a rag over the valve before pressing the core, in order to catch the fuel that is going to spurt out.

[CKMustangCobra]

Before unbolting the fuel rails, don't forget to:
0. Disconnect Battery
1. Turn off the fuel pump switch in the trunk;
2. Release the pressure in the fuel rails before unbolting them. There's a shrader valve (like on a bicycle tire) on one of the fuel rails which you depress to release the pressure - place a rag over the valve before pressing the core, in order to catch the fuel that is going to spurt out.
Fixed the steps for you!

[james1986fox]

Fixed the steps for you!
oops I just seen all this but I already did it without doing any of these steps all worked out fine though thanks for trying to help