Marauder Engine parts FS

[Drewstang]

I picked up an 03 Mach 1 engine locally and had planned to build it to replace the engine in my car. I was laid off a month ago, and I need to liquidate some parts to pay bills and purchase some needed parts for the Marauder. I can accept paypal, I'm willing to ship just about everything, and I can meet with anyone within 2 hours drive of Louisville KY where the parts are located. Feel free to ask any questions, if you need additional pics PM an email address.

Here's what I've got:
4.6 DOHC cam covers- $125
http://i5.photobucket.com/albums/y185/Drewstang/Area%2051/P4210005.jpg

4.6 DOHC aluminum block, needs a hone in number 1 cylinder after detonation- $200
http://i5.photobucket.com/albums/y185/Drewstang/Area%2051/P1000755.jpg
http://i5.photobucket.com/albums/y185/Drewstang/Area%2051/P1000676.jpg
http://i5.photobucket.com/albums/y185/Drewstang/Area%2051/P1000756.jpg

4.6 DOHC 4V heads, in good shape, come with Mach 1 cams-chains-tensioners-etc- $750

4.6 DOHC Mach 1 timing cover- $125
http://i5.photobucket.com/albums/y185/Drewstang/Area%2051/P4210006.jpg

4.6 DOHC Mach 1 oil pan- $50

4.6 DOHC Mach 1 8 bolt forged crank- $250

4.6 DOHC COP's- $75 for all 8

4.6 DOHC Mach 1 rods and pistons, one bad piston, all rods good- $100

4.6 DOHC 03-04 Cobra Mahle pistons, 8.5:1 comp pistons, I have 7- $125 for all

[Drewstang]

http://i5.photobucket.com/albums/y185/Drewstang/Area%2051/P4210010.jpg

http://i5.photobucket.com/albums/y185/Drewstang/Area%2051/P4210004.jpg

http://i5.photobucket.com/albums/y185/Drewstang/Area%2051/P4210003.jpg

http://i5.photobucket.com/albums/y185/Drewstang/Area%2051/P4210002.jpg

http://i5.photobucket.com/albums/y185/Drewstang/Area%2051/P4210001.jpg

[Drewstang]

http://i5.photobucket.com/albums/y185/Drewstang/Area%2051/P42100012.jpg

http://i5.photobucket.com/albums/y185/Drewstang/Area%2051/P42100022.jpg

http://i5.photobucket.com/albums/y185/Drewstang/Area%2051/P1000757.jpg

[LOWBUCKMM]

i did not know that the mach 1 motors had a forged crank. i thought it had the same motor as the marauders.

[FordNut]

Manual transmission Mach1 has a forged crank, automatic is same as ours.

[Drewstang]

Bump. Still have everything. Prices are obo.

[bob6364]

I'm in dire need for 4v heads ...but that is waaaaaaaay to much chaching for me...

[ImpalaSlayer]

I'm in dire need for 4v heads ...but that is waaaaaaaay to much chaching for me...


hell thats a good price

[Drewstang]

hell thats a good price
That was my thoughts also.

[bob6364]

Guess i'm just a cheap ****....

[Drewstang]

You can drive down to Kar Kraft's sale in Michigan and get them for $600 a pair.

[Jeremy]

Ya know.. I sorta want the block and crank..

Let me see what my finances/contracting jobs look like at the end of the week.. maybe shoot up Dixie Hwy next weekend?

[Drewstang]

That works. Just let me know.

[ginson3]

I am loking for a pair of cam covers for the Marauder, but by the photo it appears the PCV valve on this pair is driver side rear instead of passenger side front. I guess I had always assumed they would be interchangeable. Can anyone clarify?

Thanks,
JR

[FordNut]

There are a few different versions. Some have the PCV on the driver's side rear and some on the passengers side front. They seem interchangeable, but the drivers side hole is not in the same spot. Should actually work, but the tube from the valve cover to intake tube will have to be a different length and it may rub the wiper motor mount & cowl cover.

[hwhitfi1]

yo i whant to know how to call u about that 8 bolt cranksaht u got out of that mach

[Pops]

Old thread alert!

[SC Cheesehead]

yo i whant to know how to call u about that 8 bolt cranksaht u got out of that mach


Dude, this thread is over 18 months old...

[CBT]

yo i whant to know how to call u about that 8 bolt cranksaht u got out of that mach
Hi, sailor! :wave:

[Vortech347]

Huk'd on fonix?

[Spectragod]

Pat, I'd like to buy a vowel.....