View Full Version : A/c problem( please help)
mercury5
06-17-2009, 07:45 PM
MY FAN DOES NOT WORK FROM THE STERRING WHEEL CONTROL OR THE MAIN CONTROL ITSELF. I REPLACED THE BLOWER MOTOR STILL NOTHING MY A/C LINE ARE COLD, I CAN HEAR MY VENTS WORKING ,THE TEMP. CONTROL WORKS.JUST CANT GET THE FAN TO WORK.:bigcry:
RF Overlord
06-17-2009, 07:53 PM
Read this (http://www.mercurymarauder.net/forums/showthread.php?t=54095) thread.
start by checking the fuses, and if they are all good,there is a resistor that controls the speed of the blower motor, check for power at the motor with a test light then if there is no power , go to the resistor and check there.
bob6364
06-17-2009, 08:06 PM
you need to replace this 53 bucks from ford,lives in a hole behind your passenger side valve cover....
http://www.mercurymarauder.net/forums/attachment.php?attachmentid=15 986&stc=1&thumb=1&d=1243943992
Ps your like number 5 to ask this question in the last 30 days.....these things must be on a friggin timer to fail.
MM03MOK
06-18-2009, 05:01 AM
there is a resistor that controls the speed of the blower motorNo, there isn't. The blower motor speed is controlled by a PWM signal generated by the Blower Control Module.
DEFYANT
06-18-2009, 12:35 PM
No, there isn't. The blower motor speed is controlled by a PWM signal generated by the Blower Control Module.
Thanks Scotty :cool:
bob6364
06-18-2009, 01:36 PM
Beam me up....
Marauderjack
06-18-2009, 02:36 PM
MY FAN DOES NOT WORK FROM THE STERRING WHEEL CONTROL OR THE MAIN CONTROL ITSELF. I REPLACED THE BLOWER MOTOR STILL NOTHING MY A/C LINE ARE COLD, I CAN HEAR MY VENTS WORKING ,THE TEMP. CONTROL WORKS.JUST CANT GET THE FAN TO WORK.:bigcry:
About 50% of the time you can WHACK the BCM with a screw driver and it will work again but I'd replace it and not worry about it stopping again!!:beer:
My dealer did the above to a MGM from Florida 2 years ago and it is still working.....the folks stopped by and told him on their way up North!!:beer:
Powered by vBulletin® Version 4.2.5 Copyright © 2025 vBulletin Solutions Inc. All rights reserved.