Police option

[Coupe]

The Crown Victoria with police package has the clamps around the rear axles, for boost.
can i use this clamps for the marauder? also i want to have the blue silicone water hoses with aircraft clamps.
where can i get the parts?

[cvpiftw]

Hoses wont and are these clamps to cover the swaybar bushings?

[ctrlraven]

Yeah the hoses are Ford Racing High Temp coolant hoses. Only kits I know of are for the foxbody 5.0 mustang only, I have them on my 89 LX.

[Bradley G]

The clamp thing goes on the rear axle(s).
They are supposed to be added protection from a rear end collision.
This is part of a limo/police kit available from Ford.
The Crown Victoria with police package has the clamps around the rear axles, for boost.
can i use this clamps for the marauder? also i want to have the blue silicone water hoses with aircraft clamps.
where can i get the parts?

[gdmjoe]

ctrlraven - Yeah the hoses are Ford Racing High Temp coolant hoses. Only kits I know of are for the foxbody 5.0 mustang only, I have them on my 89 LX.
The ones on P71s ( as an option ) are not Ford Racing Performance Parts.

They are the silicone severe service hoses. Option # 177

3W7Z-8260-AA (https://www.tituswillfordparts.com/cart/?pn=3W7Z-8260-AA+) - Upper
3W7Z-8286-DA (https://www.tituswillfordparts.com/cart/?pn=3W7Z-8286-DA+) - Lower (RH) "T"
3W7Z-8286-EA (https://www.tituswillfordparts.com/cart/?pn=3W7Z-8286-EA+) - Lower (LH)
1W7Z-8075-AA (https://www.tituswillfordparts.com/cart/?pn=1W7Z-8075-AA+) - Tank
3W7Z-18472-AC (https://www.tituswillfordparts.com/cart/?pn=3W7Z-18472-AC+) - Heater
3W7Z-18472-AD (https://www.tituswillfordparts.com/cart/?pn=3W7Z-18472-AD+) - Heater
*-click- any | all of the above links for retail / wholesale pricing.

*You will need stainless steel liner clamps ..... stock worm -versus- liner

http://www.breezeclamps.com/images/hose2.gif

Breeze (http://www.breezeclamps.com/liner.htm) part #s 9408 - 1/2" > 29/32" (2)
9416 - 13/16" > 1½" (6)
9432 - 1 9/16" > 2½" (6)

http://memimage.cardomain.com/ride_images/2/3827/2241/22066120168_large.jpg

[gdmjoe]

Bradley G - The clamp thing goes on the rear axle(s). They are supposed to be added protection from a rear end collision. This is part of a limo/police kit available from Ford.
3W7Z-9B007-AA - fuel tank shield kit (2003+)

[Coupe]

3W7Z-9B007-AA - fuel tank shield kit (2003+)
are hese the clambs? can you give me a price and witch parts include it?
where can i get the hoses?

[252life]

The Crown Victoria with police package has the clamps around the rear axles, for boost.
can i use this clamps for the marauder?


Here's a tread about the rear axle upgrade-shields 3W7Z9B007AA

http://www.mercurymarauder.net/forums/showthread.php?t=30271&highlight=3W7Z-9B007-AA

It's to prevent fuel-leaks and fire in case of a 75+ mph rearend collision.
It won't give any boost, if you want that then you need a supercharger ;)




Install pictures:

http://352.one85.com/upgrade.htm (http://352.one85.com/upgrade.htm)



(And this got me thinking that installing a rear axle girdle like the TA Performance Girdle, might not be the smartest thing to do. It will do the opposite with it's sharp edges..)

[RF Overlord]

Coupe, as others said, that rear-axle shield is only to help prevent the gas tank from being punctured in case of a high-speed rear-end collision. If you're worried about that, then yes the CVPI kit will fit the Marauder.

The bad news is that the blue silicone hoses will not. They're only for the 2V motor.

[bob6364]

Almost 300 bucks just for the hoses! Dam...

[CBT]

Holy ****znitz that's clean :up:




http://memimage.cardomain.com/ride_images/2/3827/2241/22066120168_large.jpg

[Coupe]

Coupe, as others said, that rear-axle shield is only to help prevent the gas tank from being punctured in case of a high-speed rear-end collision. If you're worried about that, then yes the CVPI kit will fit the Marauder.

The bad news is that the blue silicone hoses will not. They're only for the 2V motor.
hmm, oka, thanks @ all