PI Stallon Converter 3100 stall FOR Sale

[lincolnpimp]

I have a PI converter with 200 miles on it. Engine blew and I am going a different route. Up for sale $350.

PM me

Jeff

[LANDY]

how long have you had it?
is there anything wrong with it?
how would it do on city driving in a n/a set up with 4.10s and 28x10 tires?

[Glenn]

How did your engine blow - it is helpful to all of us to know what went wrong.

Glenn :burnout:

[lincolnpimp]

Lots of meth, 27 degrees of timing, 20 psi of boost and me driving it like I stole it. I was incredible! I was just waiting to blow it so I could build it bigger and better.. .. Gonna go with a complete balanced rotating forged assm. Bore and stroke it!!!
BLOW IT TO BUILD IT BIGGER AND BETTER

[LANDY]

im interested would you answer my ?s if you wanna sell it

[ImpalaSlayer]

lets see some pics of that setup man

[james1986fox]

sold to me thanks lincolnpimp

[MM_BKK]

Lots of meth, 27 degrees of timing, 20 psi of boost and me driving it like I stole it. I was incredible! I was just waiting to blow it so I could build it bigger and better.. .. Gonna go with a complete balanced rotating forged assm. Bore and stroke it!!!
BLOW IT TO BUILD IT BIGGER AND BETTER

Not to hijack your thread, but inquiring minds want to know.

Wow! 20 lbs of boost! :eek:

What kind of blower set up do you have? If that's with the Eaton 112 pictured in your avatar, that is amazing!
Also, who did your tuning with 27 degrees of timing on a 10:1 motor with 20 pounds of boost? (I just want to make sure that I don't use them for my tuning) :lol:

[lincolnpimp]

Knew what I wanted to do. BLOW IT UP TO BUILD IT BETTER. The turner I used was amazing. And completely only did what I asked. Complete forged long block is going in this week! And yes I got 20psi out of an Eaton M112. 6psi bigger crank pulley, 4psi smaller blower pulley, on a blower designed to put out 9 psi stock.... well I guess we can all do the math.


Planning on running a little less timing. Same amount of meth injection, and as much boost as I can squeeze out of that Eaton!!!! Gotta love a complete CUSTOM SET UP!

[MM_BKK]

Are you running a seperate belt for the blower or just a single 6-rib belt for everything? Do you have any belt slip?

What diameter is your 4 psi blower pulley?

What make is your lower pulley and what diameter is it?

I have never heard of anyone getting 20 pounds of boost with an Eaton M112 on a 4.6L 4V mod motor. You can spin it all you want, eventually it runs out of steam.
You have a rare piece!

Do you have any pictures of your custom set up you could share with us?

[bob6364]

Knew what I wanted to do. BLOW IT UP TO BUILD IT BETTER. The turner I used was amazing. And completely only did what I asked. Complete forged long block is going in this week! And yes I got 20psi out of an Eaton M112. 6psi bigger crank pulley, 4psi smaller blower pulley, on a blower designed to put out 9 psi stock.... well I guess we can all do the math.

http://horman.dyndns.org:82/hpr/forum/images/smilies/626768.gif

[mpearce]

http://horman.dyndns.org:82/hpr/forum/images/smilies/626768.gif

+1 ^^^^

Blowing up a motor on purpose is ghey.

[O's Fan Rich]

+1 ^^^^

Blowing up a motor on purpose is ghey.

Then call me Fabulous!!!!!!:D


You are correct that it is a bit "inconvenient"......

[Bradley G]

Then our buddy(s) Lidio & Jerry B. are as Ghey as they come!:lol:


+1 ^^^^

Blowing up a motor on purpose is ghey.

[MM_BKK]

Then call me Fabulous!!!!!!:D


You are correct that it is a bit "inconvenient"......

You took a calculated risk and hoping that the motor would hold together which is a lot different from someone putting together a set up and hoping it to blow.

[O's Fan Rich]

You took a calculated risk and hoping that the motor would hold together which is a lot different from someone putting together a set up and hoping it to blow.

You are correct sir!!!

http://www.morethings.com/fan/saturday_night_live/phil_hartman/phil_hartman-as-ed_mcmahon.jpg

[babbage]

Lots of meth, 27 degrees of timing, 20 psi of boost and me driving it like I stole it. I was incredible! I was just waiting to blow it so I could build it bigger and better.. .. Gonna go with a complete balanced rotating forged assm. Bore and stroke it!!!
BLOW IT TO BUILD IT BIGGER AND BETTER


Whoa! Bet you weren't expecting that Glenn. lol :lol:
Should have gotten a timeslip with the above setup.

Even better he isn't here for advice rather just to sell his TC. It's a bit reckless, but I digg it.

Too bad there's no video. Or is there?

[GetMeMyStogie]

Used for racing, huh? Is it a single-plate or triple-plate? Did your tune run it locked?

Is this converter still usable for a daily driver?

[imorb1994]

Used for racing, huh? Is it a single-plate or triple-plate? Did your tune run it locked?

Is this converter still usable for a daily driver?
I do believe the converter was sold.

[GetMeMyStogie]

sold to me thanks lincolnpimp


I do believe the converter was sold.

Ahh, so it is. I missed that the first time through the thread.