V6 16x7.5 mustang wheels for drag racing

[NATEHAWK]

Found a set of 4 V6 Mustang wheels I will be using two of them for racing the other two are up for grabs. $100 takes em....Local pickup or delivery only

[DOOM]

Are these still for sale?

[NATEHAWK]

Nope. I decided to go a different direction.

[Glenn]

Nate:

So when do I get pushed down in the Timeslip page? :coolman:

Glenn :burnout:

[NATEHAWK]

Nate:

So when do I get pushed down in the Timeslip page? :coolman:

Glenn :burnout:

Real soon my friend stay tuned. I will get her dialed in Sept. Oct records will shatter. :burnout:

[Glenn]

Great Timing - that gives me a change to get it back on November 7. :eek:

Glenn :burnout:

[chader]

Found a set of 4 V6 Mustang wheels I will be using two of them for racing the other two are up for grabs. $100 takes em....Local pickup or delivery only

so what makes you want to go with 16" when you have widened 18" s?

[NATEHAWK]

The tires I got at still 28" so I don't lose the height. I can get the MT ET streets in 18's. They are a better race tire than regular drag radials.

[ImpalaSlayer]

alot more tire selection at 16 inches vs 18

[NATEHAWK]

And the wheels I got are 16x8 (thanks Glenn)

[chader]

so what size and type 16" tires are you going with?

[NATEHAWK]

28x11.5 16"

[chader]

MT streets?

[chader]

ET Street Radial II

[DOOM]

MT ET streets ftw :banana2:

[NATEHAWK]

http://www.mickeythompsontires.com/strip.php?item=ETStreet

[Glenn]

The new MT ET Street radial tire - #3794R: P295/50R16 is a good choice. It is not even listed on the MT site. It is a 27.7 dia tire with a 10.8 tread width requires a 8-10" rim. The main difference is that it is a radial tire that does not need tubes which are expensive and heavy. This DR will not give you the shakes when you run it as the bias-ply tire will especially without tubes.

Glenn :burnout:

[DOOM]

The new MT ET Street radial tire - #3794R: P295/50R16 is a good choice. It is not even listed on the MT site. It is a 27.7 dia tire with a 10.8 tread width requires a 8-10" rim. The main difference is that it is a radial tire that does not need tubes which are expensive and heavy. This DR will not give you the shakes when you run it as the bias-ply tire will especially without tubes.

Glenn :burnout:

Do they make these in a size that will fit our widened rims???

[FormulaMarauder]

Do they make these in a size that will fit our widened rims???
M and H does.
http://mandhtires.com/store.php?crn=70&action=show&show_products_mode=cat_click

[NATEHAWK]

Bias Ply stick better and get u a better ET.

[DOOM]

October is right around the corner. :burnout: