View Full Version : Hot New "Pringles Induction" Power Adder!!!!
Marauderjack
08-05-2009, 08:17 AM
50% HORSE POWER INCREASE!!!!:beer::bows::banan a2:
LOL! That's a can of "Original" flavored, he should upgrade! Sour Cream and Onion dyno'd at 9hp more.
ctrlraven
08-05-2009, 08:20 AM
Heard that the Sour Cream and Cheddar net the most torque.
O's Fan Rich
08-05-2009, 08:23 AM
Jeep?......
Marauderjack
08-05-2009, 08:33 AM
One of the secrets to this installation is.........DO NOT CONNECT THE VALVE COVER BREATHER TO ANYTHING!!!
It will cause tremendous crank case pressures and explode the oil pan!!:shake:
oldekid
08-05-2009, 08:34 AM
Cool!
Going to the grocery store tomorrow, so I can pick up some new mods.
That would really be hot on a DTR.
:beer:
SC Cheesehead
08-05-2009, 08:37 AM
I'd take that over a Metco any day of the week! FTW!!
LMAO!! Farm Fresh tunes are better than Food Lion tunes.:flamer:
Going to the grocery store tomorrow, so I can pick up some new mods.:beer:
oldekid
08-05-2009, 09:27 AM
Oh, wait a minute. Installing that mod will surely make my Marauder a "race car".
As Reba would say. . . . . craaaaap!
Black Dynamite
08-05-2009, 10:25 AM
LOL! That's a can of "Original" flavored, he should upgrade! Sour Cream and Onion dyno'd at 9hp more.
Well if you look closely, to the left of the can of the Original is in fact a can of Sour Cream and Onion. It's only part of a can so it's only like 4hp though. :P
MrBluGruv
08-05-2009, 10:31 AM
Fit a turbinator in that sour cream & onion can, and you've got an unstoppable intake setup...
RR|Suki
08-05-2009, 10:32 AM
http://www.toywonders.com/productcart/pc/catalog/TD1499.jpg:lol:
One of the secrets to this installation is.........DO NOT CONNECT THE VALVE COVER BREATHER TO ANYTHING!!!
It will cause tremendous crank case pressures and explode the oil pan!!:shake:
That pic is before he ran the NOS hose to it.
SC Cheesehead
08-05-2009, 11:23 AM
:laugh: :rofl:
Come on Jake, we KNOW you've got to be a little jealous. I mean, you've been out-blinged! :D
Krytin
08-05-2009, 01:26 PM
Man, you don't know how close I was to doing that a few weeks ago!!
My daughter's '04 CV LX Sport was throw ing CEL's for first high and then low EGR flow. All of the vacuum lines were intact and the valve appeared to be working properly soooo I thought the port/passage must be plugged in the intake elbow.
My logic:
No sense trying to clean out a part that's probably all carbonized and gunked up - heck I'll just replace it!
Brilliant!
If I'm going to replace it I may as well upgrade it!
Brilliant!
BBK makes a 78mm TB/plenum one piece unit and it fits up to an '04 Mustang GT.
Comes with all the gaskets and hardware.
It's got to be an easy bolt on.
Order it from Summit Racing!
Brilliant!
It does bolt on w/minimal hose rerouting but what was I thinking - how does the stock air inlet from the filter housing "slip" over a 78mm T/B?
It doesn't!
DOH!
One two stop trip to PEP Boys then Home Depot and I had a CAI that looked just like the JLT intake in my Marauder.
The traction light comes on more frequently when leaving a stop light!
It worked okay? I'm curious enough to ask if you have a photo.
One two stop trip to PEP Boys then Home Depot and I had a CAI that looked just like the JLT intake in my Marauder.
Krytin
08-05-2009, 05:11 PM
It worked okay? I'm curious enough to ask if you have a photo.
It worked VERY well!
I will get you a picture when the kid comes home with the car at the end of the week - she's on a short road trip visiting some college friends
justbob
08-05-2009, 05:19 PM
And to think I wasted my money on the S/C! Thanks Jack!
Marauderjack
08-06-2009, 08:00 AM
And to think I wasted my money on the S/C! Thanks Jack!
No problem....Glad to help!!:beer:
I'm working on a "Pringles Kit" that is compatible with my ProCharger......LOOK OUT WORLD....1000 RWHP!!!:eek::banana2::burnout:
Marauderjack:D
Krytin
08-18-2009, 04:13 PM
It worked okay? I'm curious enough to ask if you have a photo.
I took these before I loaded it on a transport for San Diego.
Blackened300a
08-18-2009, 04:42 PM
I took these before I loaded it on a transport for San Diego.
Should apply some of those engine detailing tricks to your Marauder :D
Looks a lot better then you described it!
Krytin
08-18-2009, 05:19 PM
Should apply some of those engine detailing tricks to your Marauder :D
Looks a lot better then you described it!
It actually works really well!
That's just a fresh spray of that rubber cleaner/dressing from McMaster-Carr.
The 2 valve motors really look alot better w/out the plastic cowl over the intake!
It actually works really well!
That's just a fresh spray of that rubber cleaner/dressing from McMaster-Carr.
The 2 valve motors really look alot better w/out the plastic cowl over the intake!
LOL! Sweet, you going to start selling kits now:D
Krytin
08-19-2009, 02:58 AM
LOL! Sweet, you going to start selling kits now:D
NO!
Anyone who can't figure out how to make one of these for themselves after seeing the pictures should stick with the Pringles cans!
CRUZTAKER
08-19-2009, 03:03 AM
One two stop trip to PEP Boys then Home Depot and I had a CAI that looked just like the JLT intake in my Marauder.....
You beat me to it!
I was going to say; Paint that can or wrap it in black tape and damnit it looks like a JLT.:lol:
Krytin
08-19-2009, 03:08 AM
You beat me to it!
I was going to say; Paint that can or wrap it in black tape and damnit it looks like a JLT.:lol:
I don't want to start any trouble and I do like my JLT on the Marauder BUT
the tube I made for the CV is the EXACT same as the JLT on my Marauder (and I have enough to make 1 or 2 more if anyone needs it)!;)
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.