Stranger in the Black Sedan
08-14-2009, 06:10 AM
Hi I have posted about having very hard, non grabby brakes on here and others w/ ceramic pads seem to be having the same experience. I found a set of the pads, front and rear, that I took off my car when it had 23k miles on them. I am assuming they are the originals bc the rotors I took off at that time were original too, but I just want to verify
The pads in question have "FMxxxx" part numbers printed on the top of the friction material for each pad. Ford Motors?
The pads have a ton left on them and I sanded them flat on a piece of glass just enough to de glaze and true them up so I can break them in on the newest rotors on the car and see if the pedal feel is improved.
Thanks
STeve
The pads in question have "FMxxxx" part numbers printed on the top of the friction material for each pad. Ford Motors?
The pads have a ton left on them and I sanded them flat on a piece of glass just enough to de glaze and true them up so I can break them in on the newest rotors on the car and see if the pedal feel is improved.
Thanks
STeve