PDA

View Full Version : help!!!!



bigmerc'03
08-14-2009, 07:21 PM
Last week my tension pulley broke and my belt came off and shredded i got it back yesterday and in WOT or when i cut on the AC it squills like a stuck pig and i dont know whats the cause we used the same size belt and OEM pulley any thoughts?

fastblackmerc
08-14-2009, 07:40 PM
The idler pulley?

bigmerc'03
08-14-2009, 07:58 PM
this one
http://i512.photobucket.com/albums/t327/ShoraMarauder/IMG_0527.jpg

FordNut
08-15-2009, 05:02 AM
Maybe when the belt shredded some pieces got into another pulley or shaft. Alternator, AC clutch, other idler pulleys, or SC head unit come to mind.

Marauderjack
08-15-2009, 05:34 AM
Did they put the right length belt on.....sounds like it is TOO LONG....easier to install but very low tension allowing slippage!!!:shake:

Check your tensioner position...it should be at about the 12 o'clock position and the gap with a new belt should be about half what mine is in the attached photo!!:beer:

Sorry about the dirty engine!!:alone:

Marauderjack:burnout:

RacerX
08-17-2009, 06:28 AM
in WOT or when i cut on the AC

Cut OFF the AC? If you meant OFFF, WOT kills the AC also... hmmm...