a_d_a_m
09-19-2009, 05:38 PM
Since I've sold the Grand Marquis I've got some stuff I don't need anymore.
Mustang Bullitt-style 17x8 rims
http://i174.photobucket.com/albums/w110/jackiegleason/spring%2007/DSCN0165-1.jpg
These are the darker gray ones with the silver lip on the outside. Bought these in 2007 and ran them for 3 summers on the Grand Marquis with no issues. Minor curb rash on one but very clean otherwise, no corrosion that I remember. Tread's probably at 50% on the Pirellis, appeared to be relatively even wear but there was a little edge wear on one. Can get some pictures shortly with my crappy camera phone.
Looking for $425/best offer, local pickup only or will deliver to NE Ohio for gas money.
Wheel spacers/adapters
All are for a 5x4.5 bolt pattern and made out of billet aluminum. 2 of them are 1.5", 2 of them are 2". This was what I ran on the Marquis. They were bought off of eBay from user eZaccessory. Several at CVN have run these spacers, several have autocrossed with them, no problems. I had no issues with mine, no broken lugs or anything like that...they're in fine shape.
Looking for $75/best offer plus shipping via USPS.
Also have:
Tall-style center caps for the '98-'02 P71. Ran these on the Marquis (http://i174.photobucket.com/albums/w110/jackiegleason/cleveland%20shots/bridge.jpg) last winter. Got 8 of them, they go for like $50/set on eBay, I'll take $25 for a set of 4 and include 12 collared lug nuts (need 3 per wheel to make 'em stay on), plus USPS.
Rear sway bar for a '93-'02 P71. Was going to run this on the Marquis but never did...free if ya need one, bushings are bad, no links available, local pickup only.
Front brake pads for a '98-'02 Grand Marquis/Crown Victoria, replaced them with heavy-duty stuff, should be some good life left on 'em, free if you want 'em, local pickup only.
Mustang Bullitt-style 17x8 rims
http://i174.photobucket.com/albums/w110/jackiegleason/spring%2007/DSCN0165-1.jpg
These are the darker gray ones with the silver lip on the outside. Bought these in 2007 and ran them for 3 summers on the Grand Marquis with no issues. Minor curb rash on one but very clean otherwise, no corrosion that I remember. Tread's probably at 50% on the Pirellis, appeared to be relatively even wear but there was a little edge wear on one. Can get some pictures shortly with my crappy camera phone.
Looking for $425/best offer, local pickup only or will deliver to NE Ohio for gas money.
Wheel spacers/adapters
All are for a 5x4.5 bolt pattern and made out of billet aluminum. 2 of them are 1.5", 2 of them are 2". This was what I ran on the Marquis. They were bought off of eBay from user eZaccessory. Several at CVN have run these spacers, several have autocrossed with them, no problems. I had no issues with mine, no broken lugs or anything like that...they're in fine shape.
Looking for $75/best offer plus shipping via USPS.
Also have:
Tall-style center caps for the '98-'02 P71. Ran these on the Marquis (http://i174.photobucket.com/albums/w110/jackiegleason/cleveland%20shots/bridge.jpg) last winter. Got 8 of them, they go for like $50/set on eBay, I'll take $25 for a set of 4 and include 12 collared lug nuts (need 3 per wheel to make 'em stay on), plus USPS.
Rear sway bar for a '93-'02 P71. Was going to run this on the Marquis but never did...free if ya need one, bushings are bad, no links available, local pickup only.
Front brake pads for a '98-'02 Grand Marquis/Crown Victoria, replaced them with heavy-duty stuff, should be some good life left on 'em, free if you want 'em, local pickup only.