PDA

View Full Version : balancer pully threads


ImpalaSlayer
09-20-2009, 10:01 AM
hey all, im trying to pull off my steeda under drive pully and put my factory one back on. i bought a pully kit but none of the bolts that came with it fit either pully. also the 2 pully have 2 different threads. :help:

Dave
O's Fan Rich
09-20-2009, 10:18 AM
What are you asking, Dave?
Are you trying to see if someone knows the thread size?
Blackened300a
09-20-2009, 10:41 AM
hey all, im trying to pull off my steeda under drive pully and put my factory one back on. i bought a pully kit but none of the bolts that came with it fit either pully. also the 2 pully have 2 different threads. :help:

Dave

I bought the pulley removal tool from sears and it had the right sizes for the steeda and the stock one. I think it cost me like $30.
ImpalaSlayer
09-20-2009, 10:50 AM
What are you asking, Dave?
Are you trying to see if someone knows the thread size?

yeah sry, just woke up lol
ImpalaSlayer
09-20-2009, 10:51 AM
I bought the pulley removal tool from sears and it had the right sizes for the steeda and the stock one. I think it cost me like $30.

my any chance do you still have the box or something that would tell you what they are?
Blackened300a
09-20-2009, 11:17 AM
my any chance do you still have the box or something that would tell you what they are?


This is the puller I have. Its the craftsman model for $20.

Description

This puller is designed to pull crankshaft-vibration dampers. It can be any type of gear with tapped holes such as a steering wheel. Four slots in the caster permit use in any configuration.
Set includes: one casting, one 5/8-18 stress proof screw, two screw adapters (pointed and flat), three 3/8-24 x 2 in. hex head cap screws, three 5/16-18 x 2 in. hex head cap screws, three M8 x 1.25 80mm head hex cap screws, and two 3/8-16 x 4 in. hex head cap screws. Flat and pointed adapter. Tool can also be used to pull steering wheels.
Blown3.8
09-20-2009, 12:00 PM
The factory balancer prolly has m8x1.25 threads. And the Steeda is prolly SAE thread of some diameter and pitch prolly 5/16 x 18.
scruff
09-20-2009, 07:20 PM
both bolts are the same just screw it
ImpalaSlayer
09-20-2009, 07:29 PM
steeda turned out to be a 8x1.25 as Chris said.