View Full Version : 03mm error codes
ebuser
09-21-2009, 12:00 PM
can anyone tell me what a p0456 and a p1000 error code means?
RF Overlord
09-21-2009, 12:25 PM
Google is your friend...
P0456 - Evaporative Emissions System - Small leak detected
P1000 - I/M Readiness
P1000 means the required I/M readiness drive cycle has not been complete since the battery was last disconnected.
P0456 is frequently a loose or bad gas cap, but can be an evaporative emissions issue in the canister under the car, below the trunk. Possibly a loose or cracked hose.
P0456 - EVAP Control System Leak Detected (Very Small Leak)
P1000 - OBD (On Board Diagnostic) System Readiness Test Not Complete
for the p0456 I would take it to a shop with a smoke machine. As with this code you have a hole as small as 0.020 of an inch you can imagined that isn't easy to find visually. the p1000 is from someone clearing the codes and a full drive cycle hasn't been completed since. A P0457 code would have normally been set if the gas cap was left off or loose.
SC Cheesehead
09-21-2009, 12:29 PM
can anyone tell me what a p0456 and a p1000 error code means?
I've never heard of either. You sure you've got the right code numbers?
These are the closest codes listed:
P0454 Evaporative Emission Control System Pressure Sensor Intermittent
P0455 Evaporative Emission Control System Leak Detected (gross leak)
P0460 Fuel Level Sensor Circuit Malfunction
P0465 Purge Flow Sensor Circuit Malfunction
P0466 Purge Flow Sensor Circuit Range/Performance
P0100 Mass or Volume Air Flow Circuit Malfunction
BTW, you can access a list of codes here (tip of the hat the the SSS Marauders :up:):
http://www.sunshinestatemarauders.net/
Powered by vBulletin® Version 4.2.5 Copyright © 2025 vBulletin Solutions Inc. All rights reserved.