teaser

[ImpalaSlayer]

its bout 99% complete! just a crappy phone pic, ill get better ones when its finished
http://i2.photobucket.com/albums/y47/blaster250cr/IMG00008-20091007-2007.jpg

[TiTo35]

Sweeeeeeeeeeeeeeeeet!

[ginson3]

Looking good Dave, nice job

[Pops]

Nice job Dave! Are you done yet?:lol:

[ImpalaSlayer]

thanks guys!

[Glenn]

Congrats on a great looking job - coming to SSHS9?

Glenn Ford

[ImpalaSlayer]

Congrats on a great looking job - coming to SSHS9?

Glenn Ford

thanks, i wont be there till im sure i can take you down ;)

[LANDY]

see, thats a good looking blower for a budget.
nice Dave cant wait for the results.

[mpearce]

Congrats dude...looks awesome. 12's N/A just wouldn't have made you happy. Initially yes (for the accomplishment) long run...no. Glad you went with the Supercharger.

:cool:

[tjl006]

Looks great Dave! hope my engine bay looks that good when I am done. I want to see more pictures of the crossover tube, I like how you did it.

[justbob]

Looks awesome Dave! Just where did you have to move the fuse box?

[ImpalaSlayer]

Looks great Dave! hope my engine bay looks that good when I am done. I want to see more pictures of the crossover tube, I like how you did it.
i was lucky i had 2 of them, the first one me and my dad come up with was a down right abortion, but i used it to show the welder what i needed outa the second one. he did an awesome job on it. also by removing the one tube that goes down from the main tube it simplified things. just made a simple T and moved to the side. worked out great

[ImpalaSlayer]

Looks awesome Dave! Just where did you have to move the fuse box?

just turned it 90* and mounted it to the fender like Zack did

[LOWBUCKMM]

looks sweet man. i would love to do that. but i would not want my car down for to long.

[sd8683]

Lookin good Dave! Whens the dyno tune again?

[ImpalaSlayer]

Lookin good Dave! Whens the dyno tune again?

maybe tomorrow but probably friday, i still have to put the fuel pump in

[bob6364]

I really need to get mine started......

[RacerX]

Nice! Shiny! What kit is that? I really have to stop spending money on this car! ;) Hey Bob!!! You have an sc too huh... You guys suck... or push! :D

[DOOM]

:woohoo:

:high5:

[ImpalaSlayer]

Nice! Shiny! What kit is that? I really have to stop spending money on this car! ;) Hey Bob!!! You have an sc too huh... You guys suck... or push! :D

The word kit definitly doesn't apply, its anything but. I came in about 2500 bucks

[dohc324ci]

NICE. Great job bud! IT should be worth the pain and suffering you had to endure on this site LOL....have fun with it and let us know how much that bad boy is puttin to the ground.

[-Matt-]

nice dave, done yet?

[n00bkiller944]

Looks awesome dave!!!!!

[marauder_dallas]

f u c _king awsome dave sh i t look badd i love it...let us know how your dyno run goes .

[LANDY]

:banana2: 12's for sure. yessssss!

[vkirkend]

Darn!!! I wanted to have the first Blown Marauder in Delaware (Just kidding) Congrats Dave... I can't wait o see it in person.

[Ms. Denmark]

That's beautiful Dave!! Very impressive!! (What color are your valve covers?)

[RacerX]

(What color are your valve covers?)

Looks like: DE 1601 Ford Blue

[RoyLPita]

maybe tomorrow but probably friday, i still have to put the fuel pump in

Dave,
You couldn't use a Boost a Pump?

[FordNut]

Dave,
You couldn't use a Boost a Pump?

Coulda, but I think he's looking at the cheapest way. Pump upgrade costs less than a BAP, but it's harder to install.

[ImpalaSlayer]

Coulda, but I think he's looking at the cheapest way. Pump upgrade costs less than a BAP, but it's harder to install.

wrong, i coppied exactly what Zack has, GT pump with a bap

[Hooptie]

Dave,

Install looks great. Cnograts on getting it done...

And are you going to give a breakdown of parts and costs of each? Inquiring minds want to know.

[-Matt-]

Did you buy your BAP new? 20 or 40amp? How much?

Mind if i also ask how much you paid for your gt40 pump? Im getting quoted $180 (i remembered them being cheaper?)

Thanks Dave.

Get back to work!!

[FordNut]

wrong, i coppied exactly what Zack has, GT pump with a bap

I see. Either way would have been adequate for the base SC upgrade, but I assume you're going to up the boost pretty soon...

[ImpalaSlayer]

I see. Either way would have been adequate for the base SC upgrade, but I assume you're going to up the boost pretty soon...

we will see.

[Pops]

we will see. ;) :beer: :bows:

[RacerX]

You've got a PM there ImpalaFollowa! :D

[LeoVampire]

Looks good and I bet you can just smell that new horse power and can't wait to feel it in your body as well!

I envy you but I am glad it is all working out and comming together!
Hope you get a good tune for it.

[ctrlraven]

I bet you still won't be happy with it LOL and go smaller pulley and add nitrous and go knows what else haha.

Really good work Dave!

[justbob]

Two words. Drag radials! You will not even recognise that as your car...

[DOOM]

That's the MAIN thing you need dave, a good tune! :up:

[ImpalaSlayer]

I bet you still won't be happy with it LOL and go smaller pulley and add nitrous and go knows what else haha.

Really good work Dave!


this is only the begining brotha!

ill be posting all my final pics and stuff later tonight with more details on cost and stuff

[RacerX]

Cool! Is this where you started?
http://cgi.ebay.com/ebaymotors/03-04-Mustang-Cobra-Eaton-Supercharger-Kit-99-01-M112_W0QQcmdZViewItemQQhashZit em2a01a04f2eQQitemZ18041590967 8QQptZMotorsQ5fCarQ5fTruckQ5fP artsQ5fAccessories

[ImpalaSlayer]

thats not a bad start, i wouldnt pay any more for all that, you dont need half of that small crap he has pictured

[justbob]

But you do need the other half thats not pictured.

[RacerX]

But you do need the other half thats not pictured.
Blinker fluid or muffler bearings??? :lol:

Brackets, maf harness extender etc.?

[SILVERSURFER03]

Nice dave

[justbob]

Most guys don't know all the contents of the 120 lbs box that comes as a kit, believe me, it takes up a HUGE area in the living room and a couple hours to sort out. Dave along with others here are doing their own thing and for that I greatly admire their dedication! Although I feel my Trilogy sliding downhill in price daily now!!! Dave has had to pick this system piece by piece and go at it alone, or with phone help from the Zack hotline LOL. All the way down to the hoses he has had a battle finding ones that fit just right, I couldn't even image how many trips to the store he has done
now!

I'm just saying if anyone contemplates doing this then get your facts straight, get a list of ALL parts, grab as many phone numbers that you can, get ready for some down time, this will not be an outa the book experience.

Looks damn good Dave, and if you ask me, you got this done faster than I expected!

[RacerX]

Oh, so Dave's not documenting this... Great... And I thought we would just need Dave's #! :D

[twin03]

Looks good Dave..

[Spectragod]

But you do need the other half thats not pictured.

Quite a few important parts missing....

[Marauder131]

Holy *****, looks awesome!


its bout 99% complete! just a crappy phone pic, ill get better ones when its finished
http://i2.photobucket.com/albums/y47/blaster250cr/IMG00008-20091007-2007.jpg

[ImpalaSlayer]

had it fired up today! took it around the block (so to speak). fuel pump turned out to be pretty easy. only had one little leak from the hose that goes to the heater off the cross over tube. turns out the clamp was just loose. all is well other wise, the tune in it now is really screwed up. speedo pegged out to 150+ going about 20mph. it goes to the tuner tomorrow.

[ImpalaSlayer]

Oh, so Dave's not documenting this... Great... And I thought we would just need Dave's #! :D

i kinda failed. i started to but that was taking too much time for my dead line.

[bob6364]

Nice! Shiny! What kit is that? I really have to stop spending money on this car! ;) Hey Bob!!! You have an sc too huh... You guys suck... or push! :D

yup I have all the parts now just no time....mine will be sitting on a forged bottom end tho and the widened wheels and DR are here thanks to a certain friendly Massachusetts fella :D....

I was at $2050 before I bought the teksid block with all the goodies....

Boxes.....Holy crap I have parts everywhere...this project is not for the faint of heart!

[ImpalaSlayer]

Most guys don't know all the contents of the 120 lbs box that comes as a kit, believe me, it takes up a HUGE area in the living room and a couple hours to sort out. Dave along with others here are doing their own thing and for that I greatly admire their dedication! Although I feel my Trilogy sliding downhill in price daily now!!! Dave has had to pick this system piece by piece and go at it alone, or with phone help from the Zack hotline LOL. All the way down to the hoses he has had a battle finding ones that fit just right, I couldn't even image how many trips to the store he has done
now!

I'm just saying if anyone contemplates doing this then get your facts straight, get a list of ALL parts, grab as many phone numbers that you can, get ready for some down time, this will not be an outa the book experience.

Looks damn good Dave, and if you ask me, you got this done faster than I expected!

i fully understand why the triogy costs 6k. i had to fab alot of stuff for this. but came out pretty damn good.

[ImpalaSlayer]

yup I have all the parts now just no time....mine will be sitting on a forged bottom end tho and the widened wheels and DR are here thanks to a certain friendly Massachusetts fella :D....

I was at $2050 before I bought the teksid block with all the goodies....

Boxes.....Holy crap I have parts everywhere...this project is not for the faint of heart!

i have a HUGE mess to clean up in the shop! boxes, tools, soda cans, wire scraps, old loom and electrial tape, a hacked up battery tray and cross over tube, stock take off parts. its gona take me a week to clean it all up!

[ImpalaSlayer]

Cool! Is this where you started?
http://cgi.ebay.com/ebaymotors/03-04-Mustang-Cobra-Eaton-Supercharger-Kit-99-01-M112_W0QQcmdZViewItemQQhashZit em2a01a04f2eQQitemZ18041590967 8QQptZMotorsQ5fCarQ5fTruckQ5fP artsQ5fAccessories

ill post up about 95% of the stuff you will need, the rest, your on your own.

[Motorhead350]

i fully understand why the triogy costs 6k. i had to fab alot of stuff for this. but came out pretty damn good.

I'm happy for you dude. I cannot wait to hear about the dyno numbers tomorrow.

[ImpalaSlayer]

I'm happy for you dude. I cannot wait to hear about the dyno numbers tomorrow.
that makes 2 of us!

[Motorhead350]

that makes 2 of us!

I think we will be the youngest ones blown. I'm pretty sure Rider90 had his blown when he was 21, not 20. Making you the youngest Marauder owner with boost. Building the kit yourself too. That's impressive. I'm super jealous.

[ImpalaSlayer]

I think we will be the youngest ones blown. I'm pretty sure Rider90 had his blown when he was 21, not 20. Making you the youngest Marauder owner with boost. Building the kit yourself too. That's impressive. I'm super jealous.


haha never thought of that. thanks man, hope it holds together!!!

[Dj1]

NICE :beer:

[Motorhead350]

haha never thought of that. thanks man, hope it holds together!!!

I have advice for you. Keep a 30 dollar set of tools in the trunk. They will be your best friend. Don't forget a spare belt or two.

[ImpalaSlayer]

I have advice for you. Keep a 30 dollar set of tools in the trunk. They will be your best friend. Don't forget a spare belt or two.

yeah, ive been collecting some since my little brake extraviganza

[RacerX]

I think we will be the youngest ones blown. I'm pretty sure Rider90 had his blown when he was 21, not 20. Making you the youngest Marauder owner with boost. Building the kit yourself too. That's impressive. I'm super jealous.
??? RU KIDDING? I got blown when I was... oh! My bad!!! :D

[hot-rauder]

??? RU KIDDING? I got blown when I was... oh! My bad!!! :D


Dave has his car get blown since he cant.....

Burn.


Looks awesome buddy. Lets see if you keep this set up for longer than 3 months! lol

[Motorhead350]

Dave has his car get blown since he cant.....

Burn.

Reminds me of high school. Seriously!

Haha

[LANDY]

that good to hear Dave. now show us some dyno #s

[babbage]

its bout 99% complete! just a crappy phone pic, ill get better ones when its finished
http://i2.photobucket.com/albums/y47/blaster250cr/IMG00008-20091007-2007.jpg

Congrats!! looks nice and neat and clean.. Those valve covers really pop.
I guess the battery is now in the trunk - or other side?

[jdenning002]

Did you have to modify your hood to clear the blower?

[RacerX]

Did you have to modify your hood to clear the blower?
It looks like the hood clears it nicely! Any more pics you cork sucking bastige??? Dyno??? 1/4 mile??? Take your skirt off and grow a pair Sally!:D

[FordNut]

In the other thread he said the hood clears but he had to remove the insulator because it rubbed.

[Bradley G]

Looks good Dave!
I was having a breakdown with 92 Trilogy kits preceding me .
I can't imagine the toils and tribulations that took.

[ImpalaSlayer]

In the other thread he said the hood clears but he had to remove the insulator because it rubbed.

this is correct, i could have cut a hole in the liner but i think that lloks like crap. i like not having the liner, looks kinda old school

[Marauderjack]

What did you do with your PCV Dave??:confused: