Rotary Brand Mid-Rise Scissor Lift

[martyo]

This is a very high quality mid-rise scissor lift, with 48 inches of lift.

This is not a cheap "Made in China" unit. It was custom ordered from Rotary with black paint and roll around wheels, and is approximately 4 years old.

Of course I am happy to answer any questions and to make the lift available for inspection or demonstration.

These lifts are great for auto detailing, brake and wheel work, and, although this is a professional grade unit, it works well in a small home shop.

Price = $950.00. I might also do some trading (4 wheeler/golf cart/large breasted hookers).

http://www.legalknevil.com/albums/My-Garage/aan.sized.jpg

http://www.legalknevil.com/albums/My-Garage/aac.sized.jpg

http://www.legalknevil.com/albums/My-Garage/aaf.sized.jpg

[musclemerc]

You got the best toy's!!! :D

[martyo]

You got the best toy's!!! :D


My wife said the same thing to me last night!!!

[RR|Suki]

My wife said the same thing to me last night!!!

Well played sir, well played

[Krytin]

A few questions:

Am I correct to say that this lift would be difficult to drop the transmission with? Could you drop the transmission pan?

How wide is it - will it fit in the back of a pick-up?

How heavy is it?

Thanks Marty - a few more blizzards like we just had and I'll have some $$'s to play with!

[martyo]

A few questions:

Am I correct to say that this lift would be difficult to drop the transmission with? Could you drop the transmission pan?

How wide is it - will it fit in the back of a pick-up?

How heavy is it?

Thanks Marty - a few more blizzards like we just had and I'll have some $$'s to play with!

Trans work may be difficult depending on the vehicle.

I will check the weight and width.

I don't mind if you get snow as long as I am down here!!!! :beer:

[Motorhead350]

I might also do some trading (4 wheeler/golf cart/large breasted hookers).



Haha the funny thing is you aren't lying, if you didn't have a wife. Maybe you two are cool like that who knows.

I do have two questions for you on it.

1. What is the max is can lift?

2. How does it get it's power? Can I just plug it in an outlet in the garage or is it one of those that needs a "big" plug. Or does it use an air compressor?

[martyo]

Sold!!!!!!!!!!!!!!!!!!!!

[scruff]

i suppose a lift like that would be good if you have low ceiling height but nothing beats a 2 post clear floor hoist

[martyo]

i suppose a lift like that would be good if you have low ceiling height but nothing beats a 2 post clear floor hoist


Thanks for the comments.

This one was an extra in my upper garage.

I have 4 Rotarys in my lower shop and 3 more plus a drive on in my commercial shop, so I am pretty much covered.

What do you have in your set up?

[scruff]

I just have one two post hydraulic lift rated for 10,000lbs here at my home shop 20x32 14ft ceiling i bought it used for 1500.00 installed what a treat it is no more jacking and crawling around the floor

[ImpalaSlayer]

I just have one two post hydraulic lift rated for 10,000lbs here at my home shop 20x32 14ft ceiling i bought it used for 1500.00 installed what a treat it is no more jacking and crawling around the floor

i hate you :D

[martyo]

I just have one two post hydraulic lift rated for 10,000lbs here at my home shop 20x32 14ft ceiling i bought it used for 1500.00 installed what a treat it is no more jacking and crawling around the floor

I agree.

I am too old and fat to be crawling around on the ground.

[ImpalaSlayer]

Thanks for the comments.

This one was an extra in my upper garage.

I have 4 Rotarys in my lower shop and 3 more plus a drive on in my commercial shop, so I am pretty much covered.

What do you have in your set up?

oh and you too :D

[FordNut]

what a treat it is no more jacking and crawling around the floor

I only wish.

[Spectragod]

I agree.

I am too old and fat to be crawling around on the ground.

I don't believe either of those statements to be correct.

But crawling around on the floor is no treat, that I will agree with.

[martyo]

I don't believe either of those statements to be correct.


You got to see first hand how inflexible I am!

How did the unloading go?

[Spectragod]

You got to see first hand how inflexible I am!

How did the unloading go?


Inflexible, yes.... old and fat, not hardly.

Still loaded up, a buddy's going to bring a forklift over, YOU have shown me the light, or at least the easy way to get this item in/out of a van.:D

[martyo]

Inflexible, yes.... old and fat, not hardly.


You are too kind!!!


Still loaded up, a buddy's going to bring a forklift over, YOU have shown me the light, or at least the easy way to get this item in/out of a van.:D

Smart move!!!

Meanwhile, I almost had to take back all of the nice things I said about my wife! She tried to take my money!!!! :argue:

She thinks that I have "lost my mind over this whole car thing"

Bah!!!!!!

[Spectragod]

She thinks that I have "lost my mind over this whole car thing"

Bah!!!!!!

That's totally out of line, your only issue is that the garage behind your house needs to be twice the size that it is now.:lol:

[Black_Out]

damn, and I was willing to offer 7 large breasted hookers too. 7.

[martyo]

damn, and I was willing to offer 7 large breasted hookers too. 7.


I have another lift, so we can talk.

[Spectragod]

damn, and I was willing to offer 7 large breasted hookers too. 7.


I have another lift, so we can talk.

To hell with that, I'm willing to trade. :beer:

[martyo]

To hell with that, I'm willing to trade. :beer:

Start yer own damn thread!!!!

[Black_Out]

hehe, I wonder what the exchange rate on a large breasted hooker would be, approximately 125$ USD? lol