Moser axles: Loose studs

[frdwrnch]

We replaced the rear axles on this GT500KR with mosers and the ARP studs that we got from Jegs and one axle the studs are loose. They don't spin but you can rock them back and forth by hand like the ribs on the studs are not biting into the flange of the axle. I know some of you guys are using moser axles and was wondering if anyone has has a similar issue?

[martyo]

Had this problem on a Mustang axle.

Called and got new studs.

Everyone was happy.

[ImpalaSlayer]

just anothe reason not to buy moser. :down:

[Blown3.8]

If you reuse the studs they can get worn and not stay in the axle properly. There are different size stud holes though, and you would have to order the proper studs. I want to say the mosers we used on the marauder needed a bigger stud flange, but I can't recall.

[frdwrnch]

Thanks Guys. These were new ARP studs out of the box. We ordered the Moser studs and are hoping for a better fit.