Which Pads?

[Local Boy]

Hey Todd,

Hope all is well over there...

Not sure which type of pad is best for my application.

Can you recommend a particular one?

This is for a street car, with a Procharger....so I do step on it often, and do need to bring it down quickly from high speeds...But no racing. I'm thinking BP -10?

Thanks...

Aloha

[FordNut]

I'm not Todd, but I can tell you what my personal experience has been...

I've tried carbon fiber, ceramic, and OEM pads before, but I now use Metal Masters and will use them from now on.

[Todd TCE]

This is for a street car, with a Procharger....so I do step on it often, and do need to bring it down quickly from high speeds...But no racing. I'm thinking BP -10?




For the Wilwood kits either 10s or 20s will work. The 20s take more heat to come into their own. 10s are a bit more forgiving at the lower speeds and also dust less. If you really wanted to crank it up the metallic D compound is great...but it comes at the price of a noisy pad. Great for AutoX however.

[Local Boy]

Thanks Gentlemen...

Todd I will be ordering the BP-10's today...

Aloha

[DOOM]

For the Wilwood kits either 10s or 20s will work. The 20s take more heat to come into their own. 10s are a bit more forgiving at the lower speeds and also dust less. If you really wanted to crank it up the metallic D compound is great...but it comes at the price of a noisy pad. Great for AutoX however.

Which ones come with the kit? :confused:

[Todd TCE]

http://www.tceperformanceproducts.com/cgi-bin/brakes/cginews.pl?record=11

[DOOM]

Thanks Todd :D