View Full Version : Cold air intake
Mike827
01-19-2010, 02:51 AM
which one is better for the mm? Jlt or k&n
SC Cheesehead
01-19-2010, 04:50 AM
which one is better for the mm? Jlt or k&n
Either one is good. What's your preference?
ctrlraven
01-19-2010, 07:06 AM
I'm a fan of the JLT, it's simple and straight forward plus a whole lot cheaper than the K&N.
MM03MOK
01-19-2010, 07:14 AM
Plenty of threads reviewing this topic...
http://www.mercurymarauder.net/forums/showthread.php?t=54266&highlight=k%26amp%3BN+jlt
http://www.mercurymarauder.net/forums/showthread.php?t=51874&highlight=k%26amp%3BN+jlt
Jay Tucker of JLT is a supporting vendor here.
fastblackmerc
01-19-2010, 08:07 AM
i'm a fan of the jlt, it's simple and straight forward plus a whole lot cheaper than the k&n.
+1...........
Im looking for a CHROME/POLISHED intake tube.
cougar9150
01-19-2010, 02:12 PM
Im looking for a CHROME/POLISHED intake tube.
Spectre has modular intake components. They offer a big variety of lengths, diameters, and angled pieces. Used these on the first MM with good results. If I remember right a 6" length of 4" diameter polished tubing was around $20-30 @ Summit .
Should be able to find one to swap out the stock tubing on a JLT no problem.
Sent from my T-Mobile myTouch 3G using Tapatalk
-Matt-
01-19-2010, 04:25 PM
Metco carbon fiber is the best.
skyhigh
01-19-2010, 05:45 PM
but why please?
cougar9150
01-19-2010, 06:52 PM
The Metco when coupled with a PHP/Rienhart intake is the slickest looking of the bunch.
Unfortunately the Metco tube is no longer available and I never saw a performance comparison against the other CAIs.
The PHP/rienhart box is the most expensive and you will still need to buy a separate tube or use the stock one.
Sent from my T-Mobile myTouch 3G using Tapatalk
-Matt-
01-19-2010, 07:18 PM
Unfortunately the Metco tube is no longer available
Theres one available that i know of, its mine and its forsale. :)
-Matt-
01-19-2010, 07:19 PM
but why please?
No intake is really that much better then the next. I just think the metco is the sexiest
Theres one available that i know of, its mine and its forsale. :)
Why? And how much?
ImpalaSlayer
01-19-2010, 07:21 PM
Im looking for a CHROME/POLISHED intake tube.
have one made Doomie, shouldnt cost much
-Matt-
01-19-2010, 07:23 PM
Why? And how much?
Cause i already have the KB carbon one with my vortech. I dont need this one anymore. Pm me buddy, ill give you some lovin if you want it. :)
SC Cheesehead
01-19-2010, 07:24 PM
Cause i already have the KB carbon one with my vortech. I dont need this one anymore. Pm me buddy, ill give you some lovin if you want it. :)
Matt, do you have a pic you can post up? For those folks that have never seen a Metco tube they need to see one to really appreciate it.
-Matt-
01-19-2010, 07:28 PM
Matt, do you have a pic you can post up? For those folks that have never seen a Metco tube they need to see one to really appreciate it.
Sure!
http://i13.photobucket.com/albums/a254/xxshowstoppaxx/tn_CIMG1330.jpg
And heres the one i have now. KB carbon fiber short enough for the Vortech:
http://i13.photobucket.com/albums/a254/xxshowstoppaxx/0926092128.jpg
ImpalaSlayer
01-19-2010, 07:30 PM
is that thing installed yet?
-Matt-
01-19-2010, 07:33 PM
is that thing installed yet?
:( no. Been in leadership school and havent had the time. Plus i need a coolent rez like you have to finish off the needed parts list.
ImpalaSlayer
01-19-2010, 07:37 PM
from a cobra, look on svtp
-Matt-
01-19-2010, 07:44 PM
from a cobra, look on svtp
You cant find it for me? :cool:
swordfish
01-20-2010, 09:05 AM
I have one. If your interested send me a pm.
Mark
-Matt-
01-20-2010, 04:11 PM
I have one. If your interested send me a pm.
Mark
Zing!!!!!!!!!!!!!!
marvin
02-01-2010, 12:26 PM
you know which one is better. look at the way i leave you on the highway
Powered by vBulletin® Version 4.2.5 Copyright © 2025 vBulletin Solutions Inc. All rights reserved.