PDA

View Full Version : Part # for Trilogy Blower Belt



65DOHCStang
01-22-2010, 11:48 AM
Anyone have a Gates part number for the blower belt? I have stock lower (7.4") and stock upper (Eaton - 03 Cobra) pulleys.

DOOM
01-22-2010, 12:39 PM
I think your pulley sizes are diffrent.

65DOHCStang
01-22-2010, 01:14 PM
Maybe. I have a stock Cobra/Lightning pulley on the bottom and the stock Eaton on top. I measured with a string and it is about 52" with the tensioner all the way in, so that should be the longest the belt will be. I ordered a Gates K080510 (I assume 51" belt) to try.

DOOM
01-22-2010, 01:36 PM
The trilogy kit comes with a 3.4 pulley for the blower.

When I get home I'll try to dig up my belt and find a part # for you.

65DOHCStang
01-24-2010, 08:08 PM
Found it, party by trial and error and with help from Terry Gorsuch. K080530 with 75mm idler. Have to file off the stop on the tensioner to get enough slack to get it on.