PDA

View Full Version : LCM Replacement



89VERT
01-22-2010, 05:11 PM
My LCM is not allowing me to put on high beams .Does it also control the heating and cooling system as well ? Is this a rather simple job to replace? It sure looks like it . Or is it better to have the dealer do it in case of any electrical gremlins ?

ImpalaSlayer
01-22-2010, 05:13 PM
ask Bob6364, he just did this.

but no the lcm does not control the heating at all.

bob6364
01-22-2010, 05:14 PM
Do a search...LCM is easy to replace....300 dollar parts cost tho. Cheaper to replace the relay in the unit.

bob6364
01-22-2010, 05:15 PM
sounds like you have 2 modules going bad at the same time....can you hear the doors opening and closing in the dash but nothing changes in the passenger comparment?

bob6364
01-22-2010, 05:17 PM
here is the heat problem most likely....http://www.mercurymarauder.net/forums/showthread.php?t=48707&highlight=bcm
here is your lcm problem http://www.crownvic.net/ubbthreads/ubbthreads.php?ubb=showflat&Number=1159835&page=4#Post1159835

89VERT
01-22-2010, 06:19 PM
What happens is that when you want to change the airflow from floor to vent etc. , it does not always change right away, but it eventually does . Sometimes this will take a minute or so.

bob6364
01-22-2010, 10:20 PM
What happens is that when you want to change the airflow from floor to vent etc. , it does not always change right away, but it eventually does . Sometimes this will take a minute or so.

oh crap thats worse.....it your o rings
http://www.mercurymarauder.net/forums/showthread.php?t=36922&highlight=o+ring+install

DOOM
01-23-2010, 12:08 AM
Do a search...LCM is easy to replace....300 dollar parts cost tho. Cheaper to replace the relay in the unit.

Parts are less than $5 bucks!

Pm fatsblackmerc he will set you straight! :up:

fastblackmerc
01-23-2010, 08:24 AM
My LCM is not allowing me to put on high beams .Does it also control the heating and cooling system as well ? Is this a rather simple job to replace? It sure looks like it . Or is it better to have the dealer do it in case of any electrical gremlins ?

PM sent...