What did you do to your car today?

[blackwater1311]

4.10 Gears installed loving it :D

[Embassy]

In preparation for car show season, the Marauder is finally off to my detailer for a little correction, wheel polishing, and cleaning the hoodliner's Godshead logo.

For those of you in the Louisville, KY, or surrounding area:

http://pardetailing.com/ (http://pardetailing.com/)

http://www.mercurymarauder.net/forums/showthread.php?t=71643&highlight=reconditioning (http://www.mercurymarauder.net/forums/showthread.php?t=71643&highlight=reconditioning)

Several other MM.net members have utilized his services too.

[Mr. Man]

In preparation for car show season, the Marauder is finally off to my detailer for a little correction, wheel polishing, and cleaning the hoodliner's Godshead logo.

For those of you in the Louisville, KY, or surrounding area:

http://pardetailing.com/ (http://pardetailing.com/)

http://www.mercurymarauder.net/forums/showthread.php?t=71643&highlight=reconditioning (http://www.mercurymarauder.net/forums/showthread.php?t=71643&highlight=reconditioning)

Several other MM.net members have utilized his services too.
How is it even possible for your car to need a detailer? I've seen it and it is one of the cleanest out there.:beer:

[Embassy]

How is it even possible for your car to need a detailer? I've seen it and it is one of the cleanest out there.:beer:

Thanks. :beer:

There is always room for improvement. :cool:

I'll post pics later.

[bigmerc'03]

i had the upper and lower intake gaskets replaced upper gasket was still good lower driver was good passenger one was bad middle two gaskets where leaking air outter two where good and put on new fuel injector gaskets changed all 16 next oil changed ill change the crank position sensor

[MOTOWN]

Ordered Ford racing 4:10s, Auburn pro series Limited slip Diff, and 31 spline mosers! hope to get everything installed thursday, or monday.

[blackwater1311]

Installed Aero Turbines !!!!! Car sounds greattttt.

[MyBlackBeasts]

Picked up my new trunk organizer from my local awesome Ford parts dude (thanks Nico!!!) and dropped in to the trunk. Sweet! :D

[Mr. Man]

Trip to the Post Office then to Ford to pay for the wheel bearing replacement for the Aviator then home. Might wash it tomorrow if the weather looks promising for Thursday's first cruise nite.

[bolsen]

Installed Aero Turbines !!!!! Car sounds greattttt.
Do you have any other exhaust work done? If not, would PLEASE post a vid?! I always see videos of AT2525's but there is always other work done, so I can't guage what the mufflers sound like by themselves. I'm interested in making some more noise!!

[Fosters]

. .

[blackwater1311]

Do you have any other exhaust work done? If not, would PLEASE post a vid?! I always see videos of AT2525's but there is always other work done, so I can't guage what the mufflers sound like by themselves. I'm interested in making some more noise!!

I have megs 4 res delete tips rear cats delete and turbine at2525.
I had flowmaster 1st but didnt like the sound so switched to aero and now im a happy camper lol ill try to post video

[hotford]

I took her to work and on the way messed up a few non beleavers............lol

[HD4]

Just stop by the body shop full repaint is done and car looks AWESOME! 30,000 miles and brand new paint looks like it should now! Hopefully pick it up tomorrow night when detail is all done. Install the front chin spoiler too.

[babbage]

I took her to work and on the way messed up a few non beleavers............lol

hehe good stuff. Yours would make anyone believe - lol

[MOTOWN]

I ordered my 10.1 ALUMINATOR long block!

[bigmerc'03]

yesterday got my oil leak from the vortech fixed plus replace a pulley and got a new belt she feels great off the line again!!!!!

[bolsen]

I ordered my 10.1 ALUMINATOR long block!

Where did you order from?

[MOTOWN]

Where did you order from?

I was going to order it from Ford racing parts 123.com, but Summit matched there price, and beat by a buck!:coolman: so i ordered it from Summit Racing

[ctrlraven]

Doing some work on Mebot's car today.

[MOTOWN]

Got my Moroso oil pan today, and also got powdercoating back from Chris (Blown3.8) pictures just dont do his work justice!

http://i1020.photobucket.com/albums/af324/sims36/mailmm.jpg

[babbage]

Got my Moroso oil pan today, and also got powdercoating back from Chris (Blown3.8) pictures just dont do his work justice!

http://i1020.photobucket.com/albums/af324/sims36/mailmm.jpg

You realize that pan will take tweeking to the pan and/or K member to fit right? Tell me what you are doing for fitment?

[MOTOWN]

You realize that pan will take tweeking to the pan and/or K member to fit right? Tell me what you are doing for fitment?

Ive already installed one on a friends Marauder, thats where i got the idea! that pan has more clearence than the factory pan;)

[J-MAN]

Ive already installed one on a friends Marauder, thats where i got the idea! that pan has more clearence than the factory pan;)

SHAZAM! What's the part number?

[babbage]

[/B]

SHAZAM! What's the part number? RE: MOROSO OIL PAN


Yes please and can you start a new thread so its not buried in here?? THANKS.

[Shaijack]

I drove Black and almost finished the new garage forBlue..
Bought all new tools...Chrome ones Mr. Doomie.

[BUCKWHEAT]

Drove the Marauder to the Ball park to see the world champion Cardinals pound the Prince-less Milwaukee Brewers 13 to 1. (sounds like a compression ratio) That was after I got the new rear control arms & Watts links installed, rebuilt the 6-piston Wilwood calipers, installed the roll control and got the gear whine gone. All the car fixes courtesy of my son who runs a local shop.

[ctrlraven]

Wash my MM and washed Mebot's MM before I deliver it to him in a little bit.

[tbone]

Got her up to 140 mph with plenty more to go. (On a closed course)
Gotta love the MMX driveshaft!

[ncmm]

replaced the 6 dash and 2 gage pod bulbs with green leds
(see my gallery)

[tbone]

Installed new Ford GT COP covers. :)

[MyBlackBeasts]

Got her up to 140 mph with plenty more to go. (On a closed course)
Gotta love the MMX driveshaft!

What closed course??

[tbone]

What closed course??


Ancient Chinese secret.

[boatmangc]

Took my wildlife biologist, Brit bike riding, neighbor for a rather visceral experience on a closed course.
I honestly thought he was going to $#!t himself before I could get it shut down. Squealed like a little girl!!!
Made it to 86 mph and he was yelling OK! OK! OK! You can stop now!

He says thanks for my 1st and last ride in your car.

Hilarious:D

[Ms. Denmark]

Swapped out the rusty license plate screws for some that aren't

[VMARAUDER]

I took the starter down because it had been binding and sounding like you tried to start it after it was running.
After the engine would start as the gear is backing out from the flywheel it did not do so fast enough. Only happened on cold starts, so I cleaned everthing up inside and... well we will see.

[guspech750]

Wiped the brake dust off the rims and wiped some more of the engine compartment.


Sent from my iPhone
Eaton Swap + 4.10's = Wreeeeeeeeeedom!!

[IwantmyMMnow!]

Yesterday started to clean interior. As i finished vacuuming and cleaning the front passenger area, realized I should wait to do the rest since I have my kids.

Sure enough, my son spilled his drink (not much) and my daughter lost her newest pet, an inchworm, in the back seat during the drive to bring them back to my ex. :shake:

Going to get back at it before the sun says good-night....

[dohc324ci]

Picked up a rear license frame black with silver lettering light reflecting.

[stryker]

Well Marauderers, yesterday I wash and clean my Panther, today I shine the tires and visit the FLAPS of the 3 guys and buy an Poweer steering unit to replace the OEM wich is damaged and plus I buy a two bottles of Royal purple PS fluid. :burnout:

[MOTOWN]

Got the 4:10s installed today along with moser 31splines, and the Auburn pro series limited slip!

Does seem to have a lil more giddy up! i can see why 4:30s have been talked about!

One of the guys that did the install has a crown vic, and really liked my MARAUDER i told him about the site, maybe he will check out the madness!

[ctrlraven]

Changed my 3rd brake light bulbs over to LED bulbs, what a difference! Definitely considering doing the tail lights now in LEDs.

[DOOM]

Just cleaned it up and wiped it down!

Bling Bling Bìtches!!! :coolman:

[Fosters]

. .

[MOTOWN]

A package shows up from metco left at my door, and im thinking what is this i didnt order anything!

i open it and its a watts link! i forgot i had even ordered it a month ago since it was on back order, guess im getting old! lol

[jerrym3]

Bought new seatcovers for my Galaxie a few weeks ago. Pulled the interior, had seat upholstery installed, repainted the interior rear side panels, and installed the interior today.

[MMG1989]

Changed my altinator and my ignition coils and cleaned my K&N Filter and about to put my 4.10 gears in

[guspech750]

I looked and admired it as I walked out of the garage and into the rain.


Sent from my iPhone
Eaton Swap + 4.10's = Wreeeeeeeeeedom!!

[1stMerc]

Installed new coil covers

http://www.mercurymarauder.net/gallery/data/500/medium/NewCoilCover3.JPG (javascript:;)
http://www.mercurymarauder.net/gallery/data/500/medium/NewCoilCover1.JPG (javascript:;)

[vtwoodsman]

Installed new coil covers

http://www.mercurymarauder.net/gallery/data/500/medium/NewCoilCover3.JPG (http://javascript%3Cb%3E%3C/b%3E:;)
http://www.mercurymarauder.net/gallery/data/500/medium/NewCoilCover1.JPG (http://javascript%3Cb%3E%3C/b%3E:;)
Now there's a lot of plumbing under that hood.

[Comin' in Hot]

I worked on my DBP today, put it up on jack stands, dropped the exhaust from the manifolds to the behind the mufflers, dropped the trans cross member (I would rather have my teeth drilled without novocaine then to do this again), removed the trans tail housing, and installed the forced lube tail housing from Blue Oval Chips, I'll continue with putting it back together tomorrow.

[vtwoodsman]

Pulled the alternator on the MM for a cosmetic cleaning; got all the aluminum oxide brushed off and then buffed back to original color. Full car detailing. Added Marvel Mystery Oil to high test fuel fill up; works nicely with the fuel injectors. Installed new windshield wiper motor assembly, as original got real noisey.

[dohc324ci]

Kicker CompVT 6.5" sub replacement using the OEM enclosure and Kicker PX200.1 200 watt amp to complement the JL Audio component already installed.

[03sport007]

I worked on my DBP today, put it up on jack stands, dropped the exhaust from the manifolds to the behind the mufflers, dropped the trans cross member (I would rather have my teeth drilled without novocaine then to do this again), removed the trans tail housing, and installed the forced lube tail housing from Blue Oval Chips, I'll continue with putting it back together tomorrow.

Been there done that. Sucks!!!!!!

[MOTOWN]

Been there done that. Sucks!!!!!!

+2! definetly not fun:(

[boatmangc]

Went out for a drive and the smell of boosted meth :burnout:

[2,4shofast]

I changed the oil, COP's and plugs. Then I cleaned the engine and installed the Colex engine caps. I still have a lot to do before I drive it again but at least its getting there.

[Odinson]

Today I realized this thread should really be named, 'What did you do to your car yesterday.'

Yesterday In about 4.5 hours I gave the paint the full treatment for the first time. Broke out the orbital polisher.

I washed, claybared, repaired scratches, polished and sealed the paint.

Holy cow I have never had a car this nice. Looks like that spaceship from episode 1 and it's so smooth it feels like water to the touch. Sorry about the night pic as I worked till dark.

28963

[tbone]

Installed new coil covers

http://www.mercurymarauder.net/gallery/data/500/medium/NewCoilCover3.JPG (http://javascript<b></b>:;)
http://www.mercurymarauder.net/gallery/data/500/medium/NewCoilCover1.JPG (http://javascript<b></b>:;)

Did you or someone else do the custom paint on the coil covers? How much did it cost? Looks great!

[tbone]

Pulled all the carpet in the trunk and sprayed it with undercoating. Had a little corrosion in there and wanted to seal it up, plus sound deadening.

Dropped it off at the body shop to have the hood and filler panel re-sprayed.

[justbob]

2 things, both cutout related. :)

1. Had a custom Beemer up my rear trying to antagonize so at the green with him still behind me I opened the cutouts, held line lock at moderate pressure, and walked away in style. :D No more ithues with forementioned asshatious.

2. Geese in the local supermarket parking lot respond well to open headers and have no problem moving QUICKLY when in fear. LOL Nasty tall rats.

Sent from my Ally using Tapatalk 2

[1stMerc]

Did you or someone else do the custom paint on the coil covers? How much did it cost? Looks great!

Thanks,
I did the painting myself. One i started out using touch up paint, but that was to tedious. Masked them both and used rattle can high temp paint.

[Comin' in Hot]

Hooked up the tail shaft bushing lube line and reinstalled the trans crossmember, that's enough for a night, hopefully having my exhaust welded up tomorrow.

[CBT]

Rolled the Marauder forward today when I noticed the box that had the trunk spoiler in it had fallen and I back onto it yesterday. End of box smooshed, spoiler unfazed.

[MOTOWN]

After talking with Chris Sehorn at Circle D specialties about my car and combination im building, Chris is going to cook up a 3k stall tripple disc 258mm bullet proof converter!
cant wait

[RacerX]

Teased her with a front mockup...

http://www.mercurymarauder.net/gallery/data/628/medium/DSC05203a.jpg (javascript:;)

[IwantmyMMnow!]

Was at Big Lots earlier this evening and picked up these. I've noticed quite a few people have raved about this brand, so figured I'd give it a whirl. $7 for the tire shine and $3 for the wipes....

[fastblackmerc]

Now there's a lot of plumbing under that hood.

Nice, but I like mine..... :D

http://i167.photobucket.com/albums/u133/fastblackmerc/MM%20Mods/Valve%20Covers/Rightside.jpg

[1stMerc]

Nice, but I like mine..... :D

http://i167.photobucket.com/albums/u133/fastblackmerc/MM%20Mods/Valve%20Covers/Rightside.jpg

Nice job..
Think i got you beat by one hose :beatnik:

[1stMerc]

Yesterday went from this
http://www.mercurymarauder.net/gallery/data/500/medium/IMG_0008.JPG (http://javascript<b></b>:;)

To this...replaced the tiny filter that came with the kit, with the large filter from my K&N

http://www.mercurymarauder.net/gallery/data/500/medium/IMG_00022.JPG (http://javascript<b></b>:;)

[ctrlraven]

Finally replaced my footwell LED bulbs in the MM. I had took my original ones I had in there and put them into my Taurus tag light since one of the bulbs burnt out. Also remounted my reQ-5 sound processor.

[justbob]

Water pump and oil filter adaptor. Joy.

Sent from my Ally using Tapatalk 2

[bigmerc'03]

replaceed my interior lights with Leds what a big difference it mad ........a must do if you ask me

[slickster]

replaceed my interior lights with Leds what a big difference it mad ........a must do if you ask me

I concur ....... Did you do the tag trunk and hood. The tag light is so bright you can see the light on the ground

[1stMerc]

Got these this week.

http://www.mercurymarauder.net/gallery/data/500/medium/4_6Super.JPG (javascript:;)

http://www.latemodelrestoration.com/Product/Search?q=4.6%20emblems&vehicle=Mustang

[ncmm]

received an old Marauder emblem that I purchased off eBay, now it's time to give it some TLC. . .
http://www.mercurymarauder.net/gallery/data/500/old_marauder_emblem.jpg (http://www.mercurymarauder.net/gallery/showphoto.php/photo/21252)

plus I met a local Marauder owner(highoctanecobra) and bought a pair of used OEM MM wheels with center caps from him

[MOTOWN]

Installed my Metco watts link, fun fun!

[Bradley G]

I just it back from having some junk installed;New air ride compressor,
Transmission oil cooler, Tailshaft assembly W/forced lube mod,Poly sway bar bushings for the rear,
And,.. My compass is fixed!

:banana2:

[ctrlraven]

Left mine parked at the house.

Installing 6000k HID fog lights on SilverSrufer03's MM.

[Davesvt2000]

I washed the MM, all nice and clean to take to a friend's 50th bday party tonight.

[92BlackGT]

got the 4.10's installed. she definitely has more pep in her step

[jdando]

Just a wash and vacuum today:banana:

[Baconbit]

Nothing:(.........working a double for the third time this week...hopefully gonna give it a wash and vacuum this week

[jsignorelli]

I detailed my '04 Marauder today and took it to the Whiskey Cafe in Lyndhurst, NJ. There was easily 600 cars there. I had the only Marauder. I sat and heard all of the Prophets tell their girl friends and BFF's..." This Crown Vic has the Police Interceptor package".

My answer: So why does it say Mercury, and why does it also say (Marauder)I will admit, this Old Girl Silver Birch still has them scratch their heads...How did you get that engine in Tharrrr...
Again my reply: I didn't......Ford did!

[Blackened300a]

Finally got around to installing my stainless steel brake lines I bought off Impalaslayer 2 years ago. Braking seems much better, but the mushy pedal is still there even after a manual bleed and a complete ABS cycled bleed. For those keeping track, All new pads and rotors within the last 10K miles, new master within the last 2 years, all new fluid, 3 brake bleeds including the ABS and now the new lines along with yet another manual and ABS cycled brake bleed.

Getting frustrated pretty quick.

[MyBlackBeasts]

Gave New Blue the 1001 point inspection. Good news, other than needing an upper rad hose soon, no problems! So starting fresh:

Lube, oil & filter - Mobil 1
Changed trans fluid (weird filling MT with Mercon!)
Changed transfer case fluid (again weird with the Mercon!)
Next week, new upper hose & coolant
Then moved to MM. Installed my BigCars4Ever DeadPedal. You, sir, are a genius! This thing is awesome. :banana: Why it is not an OEM item on all cars is beyond me!
http://i1102.photobucket.com/albums/g443/MyBlackBeasts/DeadPedalInstall.jpg

Installed new Tunk Organizer I got from my awesome local Ford parts dude - thanks Nico! :D
http://i1102.photobucket.com/albums/g443/MyBlackBeasts/TrunkOrganizer.jpg

[Ozark Marauder]

Just got back from Ron's Custom Interiors, Had my armrest cover replaced, Looks brand new.....$35.00......:D

OZ

[Marsha]

After only 32k miles on the 2003 MM 3rd set of tires - originals & same brand and still they wear 12k miles - hoping Coopers wear better - they sure seem to be a quieter ride and a bit beefier! Here's hoping better miles.

:burnout:

[jdando]

Turned over 77,777 today :banana:

Got the speed volume thing working on the radio again.

[Shaijack]

Kissed Red and Black, took Blue out for a good ride. Felt renewed. Cleaning blue for show tomorrow. Should be the only Marauder there.

[cougar9150]

Got my new MBS exhaust installed at Mad Hatter Muffler in Tampa.

Sent from my SPH-D710 using Tapatalk 2

[Bradley G]

Scheduled some work and sent for funds, for much new upgrades.
a triple 3600 stall and some new shoes coming soon

[tbone]

I installed a new alternator. The old one still worked, but I was getting a strange whine on WOT. Sure enough, the thing made a grinding noise when spun by hand. Whine gone. :beer:

[Mr. Man]

Beautiful day today so we took the SB to the 1st annual Troop 54 Boy Scout car show. Had a good time and came away with the beginnings of a good farmers tan. No trophies this time but the winners were outstanding and very deserving.

[stryker]

Ahhhh nothing but I think I will wash and clean the wheels and after that the whole body of the BP74i while I hear music from my new Tactical iphone 4s.

[03mmmonroe]

I install my 98 cobra cams with the Cloyes gears at the 4 deg adv. I have a trip planned to see NASVT to time all four. I will then install my new cam covers and front cover.

[RacerX]

WHAZZZZUPPPPPPP!!!!!! :D

How'd that get under my hood???

http://www.mercurymarauder.net/gallery/data/628/medium/IMG_0608a.jpg (http://javascript<b></b>:;)

[Comin' in Hot]

I got to see my DBP today when I got home after spending 5 days working in Harrisburg at the PA Fire Expo. My cousin spent 16 hours detailing the exterior of it for Carlisle (application of Iron-X, clay bar, two stage polish, 2 coats of wax). The car looks amazing for a 65,000 mile car that had crappy factory paint. I'm almost afraid to drive it.

[1stMerc]

Gave it the Croftgate treatment.

[ncmm]

Took the green LEDS out of the dash and console gage pod. Put white LEDS in their place. Much better.

[CBT]

Drove it to work. Briskly. :cool:

[MyBlackBeasts]

Spent some time with New Blue (F150) this weekend:

Replaced passenger power door lock actuator (best 10 minutes I've spent with the beast yet!)
Replaced the factory stereo with a Jensen unit I had sitting around in the garage that used to be in my diesel Bunny (VW Rabbit) a few years back
Then sat back in the sun, stared dreamily at my fleet while enjoying some cold brewskis while contimplating how lucky I am... :coolman:

If plans go well, next weekend starts with pulling diff/axle housing out from under the MM.

[ctrlraven]

Oil change for the MM, trying out Mobil 1 5W30 High Mileage formula this time.

[tbone]

Finally just about finished prepping the front bumper for paint.

[cragantler]

Finished installing my "new" Lincoln Continental center console.
http://i56.photobucket.com/albums/g192/cragantler/Consoleprojectcompleteagain001 .jpg

Thought it came out nice. just adding parts to make her my own creation and not like any other P-73:banana2:

[DOOM]

Got some new "BLING" today! :coolman:

[slickster]

Got some new "BLING" today! :coolman:

Did you get a grill :D

[slickster]

I install my 98 cobra cams with the Cloyes gears at the 4 deg adv. I have a trip planned to see NASVT to time all four. I will then install my new cam covers and front cover.

Nice Russ let us know when you run at the track. Wink wink

[IwantmyMMnow!]

4 M-F 10s !!!!

:burnout::burnout::burnout::bu rnout:

[Bluerauder]

Wash, clay bar, wax, detailed engine and interior. Break time !!! :D

[DOOM]

Put some new BLING on!

[loud2004marquis]

Got a brand new in the box trunk organizer!

[guspech750]

I beat the snot out of it like everytime I drive it:burnout:

[IwantmyMMnow!]

Washed her and then drove to my favorite spot on the BRP...Craggy Gardens. Enjoyed the cooler air (71F vs 85F) for an hour, then drove back home. Stomped the gas a little going through the tunnels...sounded freakin' awesome...

[MyBlackBeasts]

Put some new BLING on!

Pics or it never happened!!! :D

[boatmangc]

Vacuumed the inside, treated the leather with Zainos
Detailed under the hood.


Stripped the paint and did a Poorboys application.
Clayed, then used Pinnacle paint cleansing lotion.
Used Nattys Blue on the paint and Poorboys Wheel Wax.
Topped off with Poorboys QD+ detail spray.

It'll do until I get the Porter Cable out for winter.


Car show today.

[Comin' in Hot]

I rehung my front bumper cover today, the sag was really bad, I should have taken pictures before I started. I also reinstalled my license plate bracket that was falling off. Now all I need to do is find a plate until I get the bumper holes filled and painted.

http://i22.photobucket.com/albums/b335/Witman40/0ebf8c0a.jpg
http://i22.photobucket.com/albums/b335/Witman40/528e571f.jpg
http://i22.photobucket.com/albums/b335/Witman40/2b681b5d.jpg

[boatmangc]

Went to the car show today
1st Annual Southernmost Car Show.
Judges (6) were all under 18 years old. They were "trained" yesterday
Sponsored by the Hagerty Operation Ignite program.
Unfortunately they weren't supervised and it was a mess.
I got beat by this
http://i60.photobucket.com/albums/h9/boatmangc/IMG_1364.jpg

And this

http://i60.photobucket.com/albums/h9/boatmangc/IMG_1355.jpg

:depress:

[tbone]

Installed a trans drain plug and re-installed the 1-2 shift spring. Much nicer shift and I still get a nice chirp and firm shift when I hit 2nd gear at WOT.

Also changed the diff fluid. Next time I'm going to get a pump for the fluid. What a pain to fill.

[Mr. Man]

I rehung my front bumper cover today, the sag a really bad, I should have take before pictures. I also reinstalled my license plate bracket that was falling off. Now all I need to do is find a plate until I get the bumper holes filled and painted.

http://i22.photobucket.com/albums/b335/Witman40/0ebf8c0a.jpg
http://i22.photobucket.com/albums/b335/Witman40/528e571f.jpg
http://i22.photobucket.com/albums/b335/Witman40/2b681b5d.jpg
Dump the bracket and get some push in grommet thingies, paint them DPB or is it DBP.:rolleyes:

[MyBlackBeasts]

Taking advantage of a rare 3 day weekend with no other plans! :D
Up 1st is New Blue - F150:

Upper rad hose & new coolant
Vacuum/recharge/leak check a/c
Front stailizer links
Change front diff fluid
3M headlight restore kit both sides - they look brand new!
Tomorrow - MM! :banana:

[Comin' in Hot]

Dump the bracket and get some push in grommet thingies, paint them DPB or is it DBP.:rolleyes:

I would, but the bumper is really beat up and paint is spidered. I need to send it out to be refurbished.

[MyBlackBeasts]

MM: Started 4.10 project,

http://www.mercurymarauder.net/forums/showthread.php?t=79929

Project details:

Powdercoat axle housing
4.10 gears
31-spline carrier & axles
Control arms
sway bar
When completed will be followed by WOT & lots of smiles! :D :burnout: :D

[ctrlraven]

Doing a bunch of upgrades on DOOM's car.

[MOTOWN]

Doing a bunch of upgrades on DOOM's car.

Details Bud???

[tbone]

Put the newly painted front bumper back on along with all new stainless hardware, painted mesh, new grille and another new spoiler. Hope the wife doesn't curb it again........

[stryker]

Just fill the tank of BP74i.

[ctrlraven]

About to go wash the MM.

[DOOM]

Been detailing for the last 3 days! :lol:

[DOOM]

Doing a bunch of upgrades on DOOM's car.

FTW!!! :high5:

[Mr. Man]

Farted around with the sticking rear caliper and found nothing unusual. Went for a long test ride and everything seems normal. Will do a hand test before getting on RT78 tomorrow morning and if everything checks out we'll go for it.

[Commodore Crap]

(Non-Marauder related)
Getting closer to installing the PI motor in the Tank. I finished powder coating various parts (in between customer jobs)
Upper plenum and crossover in Lime Green secured with satin black hardware:
http://i31.photobucket.com/albums/c393/shadz39/IMG_20120530_215043.jpg
Oil pan and water pump pulley in Satin Black:
http://i31.photobucket.com/albums/c393/shadz39/IMG_20120509_091643.jpg
http://i31.photobucket.com/albums/c393/shadz39/IMG_20120509_134311.jpg

-ryan s.

[MOTOWN]

Took my circle D triple disc out of the box for inspection, this thing is built like a tank! the qaulity and workmanship is outstanding!

[RoyLPita]

Changed the oil and nitro'd the tires.

[RacerX]

Cut her out and pasted her into a background because I was bored at work... :D

http://www.mercurymarauder.net/gallery/data/628/medium/TERMN8D.jpg (javascript:;)

[justbob]

Moved it to the other side of the garage. :rolleyes:

Sent from my Ally using Tapatalk 2

[jerrym3]

Traded in my 94 TBird LX (152,000 miles) for a 2010 Ford Explorer (22,000 miles).

Car looked good from the outside, but had a lot of mechanical issues, and I just couldn't see supporting a third "toy" along with my 03 TBird and 64 Galaxie.

Still, after owning her for 18 years, it was a tough thing to do.

[hotford]

removed my old drag radials(M/T) and mounted my new Nitto Drag radials...........

[tbone]

Picked up a brand new OEM cruise control servo for my Lincoln Town Car for $50 on ebay. Installed in 10 minutes and works like a champ. I bet the dealer would have charged upwards of $700 for this repair. List price is over $500 for this part. Gotta love it.

[DaDog]

Got my new spoiler from Sparta, looks real nice. Can't wait to get the rest of car back to snuff, so I can get her painted.

[MOTOWN]

Bought a 14" BAER brake kit from J-MAN! Thanks Jon

[Bluerauder]

I let it rest. She had a very busy weekend at Carlisle. ;)

[IwantmyMMnow!]

Cleaned bird crap off hood/roof....AGAIN! Also noticed paw prints from a cat on hood as well...I know which one it is and when I see it next to the road driving to/from my place, I goose the gas and make it run. One time, I stopped to let it cross the road in front of me...I let it get halfway across, and yep....:burn: :eek:


Edit: I miss having a garage!

[Invader]

Got my fender badges in the mail today. Thanks again Marty! :thumbup: Will post more pics after the install. http://img.tapatalk.com/a6f842c1-2cdc-d7b3.jpg

[Zim Hosein]

I stopped to let it cross the road in front of me...I let it get halfway across, and yep....:burn: :eek:

:eek:

Poor kitty!

[ctrlraven]

Installed 5K 54 led bulbs in the front side markers. The led bulbs are a lot more noticible in daylight over the stock bulbs, not so much worried about brightness at night but I'll find that out sometime this week. I'll edit and update with pictures later tonight sometime.

[justbob]

Blew off the dust and drove it about three miles. LIKE. I. STOLE. IT!

Dang it is soooo easy to forget that kind of POWER after driving a loaded up E250 all week!

Sent from my Ally using Tapatalk 2

[guspech750]

I sold it today.


Sent from my iPhone
Eaton Swap + 4.10's = Wreeeeeeeeeedom!!

[1stMerc]

Sold what??

[Joe Walsh]

I sold it today.


Sent from my iPhone
Eaton Swap + 4.10's = Wreeeeeeeeeedom!!

No!
Say it aint so!?

[guspech750]

Naaaaa. Just kidding. Sitting sound asleep in the garage.
:burnout:


Sent from my iPhone
Eaton Swap + 4.10's = Wreeeeeeeeeedom!!

[justbob]

I sold it today.


Sent from my iPhone
Eaton Swap + 4.10's = Wreeeeeeeeeedom!!

For a black? :)

Sent from my Ally using Tapatalk 2

[SID210SA]

I drove it!!...hit 111,500 this morning on the way to work.

[ctrlraven]

Front side marker LED bulb swap.
http://i11.photobucket.com/albums/a164/ctrlraven/2012-06-07_14-11-11_367.jpg

Before
http://i11.photobucket.com/albums/a164/ctrlraven/2012-06-07_14-12-48_642.jpg

After
http://i11.photobucket.com/albums/a164/ctrlraven/2012-06-07_14-17-37_156.jpg
http://i11.photobucket.com/albums/a164/ctrlraven/2012-06-07_14-17-47_363.jpg

[Baconbit]

Detailed it, replaced the center console and sitting at a car show with as I type! I love the warm weather, and being off work.

[MyBlackBeasts]

Installed some of the LEDs I got while it is sitting on the stands in pieces... :bigcry:

[ctrlraven]

Should be easy to figure out what I did.
http://i11.photobucket.com/albums/a164/ctrlraven/2012-06-09_14-38-24_610.jpg

[breeze]

Naaaaa. Just kidding. Sitting sound asleep in the garage.
:burnout:


Sent from my iPhone
Eaton Swap + 4.10's = Wreeeeeeeeeedom!!

Mines even doing this for the past 2 months. Brothers coming over so she may wake up.

[bolsen]

Went to the car show today
1st Annual Southernmost Car Show.
Judges (6) were all under 18 years old. They were "trained" yesterday
Sponsored by the Hagerty Operation Ignite program.
Unfortunately they weren't supervised and it was a mess.
I got beat by this
http://i60.photobucket.com/albums/h9/boatmangc/IMG_1364.jpg

And this

http://i60.photobucket.com/albums/h9/boatmangc/IMG_1355.jpg

:depress:

The ZX is an absolute BEAST!

[slickster]

1 jl w6 12 sub in a sealed box only powered half way and still sound like 2 12's max out

[MyBlackBeasts]

Should be easy to figure out what I did.
http://i11.photobucket.com/albums/a164/ctrlraven/2012-06-09_14-38-24_610.jpg

Making crepe paper wheel covers?!?!?!?! :confused: :eek: :D

[MyBlackBeasts]

Installed the last of the LEDs I ordered (thanks FBM!) and tore back seat out for rear deck speaker mod. Played & planned... ;)

[boatmangc]

The ZX is an absolute BEAST!

That ZX was an absolute P.O.S.! There was 1 panel that shined and 1 panel that wasn't dented.

[slickster]

That ZX was an absolute P.O.S.! There was 1 panel that shined and 1 panel that wasn't dented.

I think it had a twin turbo set up. That's all young ricer crowds need and it's a winner

[Horsepower]

Had the screen installed ... Pioneer package from all that jazz in south Philly. http://img.tapatalk.com/a6936896-1ac1-ec8b.jpg


---
I am here: http://tapatalk.com/map.php?v3m53j

[Roadwarrior]

Installed a reverse light security cover plate kit [trunk plates] for a 1999-2010 CVPI on the Marauder.

[ssikpiyelnats]

Replaced the tentioner pulley, pcv valve, and pcv hose

[slickster]

Ford escape headunit. And later trunk emblem

[blkZooM]

Sat here and looked at her.. Sighhh. They still don't trust me driving her after surgery..

[Mr. Man]

Watched Mother Nature rain all over them

[Guittard22]

I was going to go get my check engine light looked at ,than my buddy that drives a crown Victoria lx told me to clean the gas cap in hot water and goo gone . 30 min later started the car and the light was gone . :)

[Ozark Marauder]

Yesterday, figured I would take an hour and clean a bit under the hood, Geez, what a mess. :help: Two hours later, looks presentable in preparation for the National Panther Meet this weekend in Branson, MO. Today, going for the interior......:D

OZ

[MyBlackBeasts]

Cleaned out rear axle in prep for 4.10 install tomorrow. :burnout:

[Marauderjack]

Put new front tires on for the 10th or 12th time!!:eek:

Finally figgered out that Kumhos are quieter, perform better and last longer than ANYTHING I have tried before!!

42,619 miles on these......:beer:

[IwantmyMMnow!]

Cleaned bird poop off roof/hood...third time this week. Wiped down rear seats and emptied seat pockets on back of front seats...my kids left me some 'surprises' in them...

Pondered for a minute or so about getting it S/Ced...

[cougar9150]

Picked up my freshly rebuilt now 200amp alternator. I should say freshly built as the only stock pieces left is the housing.

Now planning my 0 gauge power wire upgrade project for Saturday.

Sent from my SPH-D710 using Tapatalk 2

[justbob]

Fogged out 60' of road from a roll. Boy I am liking this weather! :)

Sent from my Ally using Tapatalk 2

[marauder410]

finished my big3 upgrade with stinger 0' red wires with stigner digital terminals also a db 250amp alterantor and yellow top optima battery and my volts are sooo much higher i was soo surprised

[dohc324ci]

this past weekend...

Installed TCE Stainless brake lines, flush, bled brakes. WOOHOO!~

[hotford]

mounted the new Nitto's 305/45/18, had lidio do a re tune with the new mufflers......
this is all on last saturday.....inside the shop was 95 degrees........
she still laid down 535 rwhp.....so ya I'm happy .......for now....lol

[mossiehorn]

Got out a bottle of Mothers and polished her. She needs a clay bar before she gets waxed

[MOTOWN]

Ordered a boatload of misc parts, pulleys, rotor hats, etc!

[MyBlackBeasts]

Worked "Project 4.10s". We got pinion depth set tonight, tomorrow finish pinion install & setup/install new carrier & ring gear! :banana:

Then I get to have some fun this weekend doing the axle reinstall! :D

4.10s BABY! On the way! :bows:

[Roadwarrior]

Replaced driver side window regulator w/ motor & a used inner door panel on the Crown Vic. Gave me an opportunity to practice what's involved when the Marauder needs one of these in the future.

[justbob]

Since she turns 10 this month, I finally gave her a bath today. That being the radiator/trans cooler/condensor/ and heat exchanger... WOW you should have seen that wooly mamouth between all of those! I can't believe how cool she is running now! No more flirting with 210* with air on, no more shooting pain into my back with the shifts, feels like a new car. Coolant is now at 190-194.


Sent from my Ally using Tapatalk 2

[Comin' in Hot]

Took out my LCM to get repaired on my DD and shipped out my DBP's driveshaft to Dynotech to be rebalanced. Both marauders are down, but I still love them:depress:

[MyBlackBeasts]

Did some work on the rear deck to install some 6x9's.

More work on Project 4.10s: Set pinion depth and installed pinion, pressed new bearings on the new carrier, measured backlash, will order shims tomorrow. Almost done!!! :burnout:

[1stMerc]

Removed Super charger for trip to dealer. Have to have abs checked. Piping was in the way last time. The light has started coming on again and and can feel it kicking in when lightly applying brakes. Also, got to get ac serviced, refrigerant leaked out bottom of receiver/drier.

Whistle temporarily gone, but also the squeal.

[Horsepower]

Stared at it and said " I will never cheat on you with another car ... Let's get married "

[justbob]

Took my sister-inlaws upper 60's something Mother for a ride. :) She looks older now? Weird.

Sent from my Ally using Tapatalk 2

[MOTOWN]

Picked it up from the body shop with fresh shiny paint! whooo-hoooo, now its time for the Aluminator swap!

[marauder410]

upgraded ALL my audio system wires in my trunk to stinger red 0-guage form 4-guage cheap wire power/grounds

installed a 78 pound kinetiks HC-2000 audio battery in my trunk

installed all my speaker wire in trunk to stinger 10-guage from cheap very thin speaker wire sounds SOOO much better it amazing now

vacummed and cleaned and wiped down everything in my trunk

took out the stock sub and amplifier since got big boy audio system now

installed a yellow top audio optima battery under hood

installed all digital batteyr terminals trunk/under hood with stinger one and also alll my fuse holders with stinger fuse holder DIGITAL one. WITH the biggest fuses 300amp kicker fuses in the holder should NEVER blow another fuse again hopefully :eek::D

[Timw286]

Installed new drilled/slotted rotors w/ceramic pads

[MOTOWN]

Installed my Baer big brake kit with new rotor hats! Hello stoping on a dime!!!!!!!!

[03sport007]

Installed my Baer big brake kit with new rotor hats! Hello stoping on a dime!!!!!!!!

What?????? New paint??? New Brakes???

Pics please!!!!!:beer:

[ctrlraven]

Left the MM at home since the freon is leaking and it's going to be around 100 today. Took the Taurus to work instead since the ac is nice and cold.

[MyBlackBeasts]

Finished 6x9 install in rear deck. Used nibbler to trim 6x8 openings, removed front studs from sub-box and replaced with longer bolts & 1" plactic spacer to tip front of box down to clear speaker magnet. Finished with adding 1" foam strip to seal box back to deck. Turned out pretty nice. The sound is 1000% better than the the 6x8's!!! :beer:
http://i1102.photobucket.com/albums/g443/MyBlackBeasts/6x9IinstallLa.jpg

http://i1102.photobucket.com/albums/g443/MyBlackBeasts/6x9InstallRa.jpg

[MOTOWN]

Replaced my blower control modual while the engine is out, made it a breeze to access!

Ill do the ac accumalator tommorrow

[Marsha]

Hi,
Saw that you have replaced brakes, I have 32k miles on my 03 Marauder and the brakes appear to be chattering. Is it time for new brakes or could it be something else? Thanks for any help.

Marsha (NH)

[cragantler]

Finished the install of my Ford Focus driving lights.
Simple mod and looks factory. :banana2:
5000K HID lights.
Should make a difference for nighttime driving.
I did use a Marauder light switch to keep it clean inside.:bows:
http://i56.photobucket.com/albums/g192/cragantler/FocusLightsinstalled001.jpg

http://i56.photobucket.com/albums/g192/cragantler/FocusLightsnightshots001.jpg

[MyBlackBeasts]

Nico got my last carrier shim in today - YEAH Nico!!! :D
Installed and backlash set perfect - YEAH Mark!!! :D
Now time to reinstall axle...

[Ms. Denmark]

Finished the install of my Ford Focus driving lights.
Simple mod and looks factory. :banana2:
5000K HID lights.
Should make a difference for nighttime driving.
I did use a Marauder light switch to keep it clean inside.:bows:
http://i56.photobucket.com/albums/g192/cragantler/FocusLightsinstalled001.jpg

http://i56.photobucket.com/albums/g192/cragantler/FocusLightsnightshots001.jpgYo u guys need all the lights you can get up there in Maine

http://www.thewashingtonnote.com/twn_up_fls/brake%20for%20moose%202%20twn. JPG

[jdiding]

like a asshat i broke the nipple off the throttle body for the trans kickdown cable need one asap

[Zim Hosein]

Hi,
Saw that you have replaced brakes, I have 32k miles on my 03 Marauder and the brakes appear to be chattering. Is it time for new brakes or could it be something else? Thanks for any help.

Marsha (NH)

I'm not sure who you were quoting Marsha, but "chattering" from your brakes does not sound normal at all. How is the "feel" of your brake pedal? Is it "crunchy" when you apply pressure?

[Marsha]

When I press it down it seems to keep going further than it should! My driveway is steep and when I back down that's when the brake pedal seems to chatter a bit.
Thanks,
Marsha

[blackwater1311]

Trying to fix my driver side window. It wont go down or up the rest work fine !!!
It was working fine yesterday when I washed my car. Came out today to go out and it wont come down !!!!

[loud2004marquis]

Drove it in the sunshine, WOT under some bridges, now resting in the garage.

[computertech]

My Silver Birch had its transmission fluid flushed and the filter changed, all nice new motorcraft stuff, was very pleased that there was nothing at all on the bottom of the pan........Super clean the tranny man said !!


Thumbs up Jon !:beer:





:burnout:

[IwantmyMMnow!]

I cried in it....that's right, I just said that. Now, it wasn't a big, blubbering, sobbing outburst, but a few tears did stream down my face. Happened on the way back home after dropping the kids off with the ex. It registered again that I won't see them next weekend (her weekend) and it just hit me like a ton of bricks. This :mad2::censor: really sucks, but at least I get to see them as much as I do. I will get them the following Tuesday for 4th of July stuff, so only have to wait a couple more days than usual to see them again. However, this 'silver lining' wasn't enough to satisfy me earlier tonight.

Have a feeling I'm probably gonna get plowed next Saturday at the TK down in GA....hope you're ready, Brad! :lol:

[MOTOWN]

I looked at with no engine and asked my self why in the hell did i do that?

[ctrlraven]

Drove it to work and getting ready to drive it back home.

[Horsepower]

I cried in it....that's right, I just said that. Now, it wasn't a big, blubbering, sobbing outburst, but a few tears did stream down my face. Happened on the way back home after dropping the kids off with the ex. It registered again that I won't see them next weekend (her weekend) and it just hit me like a ton of bricks. This :mad2::censor: really sucks, but at least I get to see them as much as I do. I will get them the following Tuesday for 4th of July stuff, so only have to wait a couple more days than usual to see them again. However, this 'silver lining' wasn't enough to satisfy me earlier tonight.

Have a feeling I'm probably gonna get plowed next Saturday at the TK down in GA....hope you're ready, Brad! :lol:

It's ard man , I know how you feel ... No crying in the rauder tho lol.


---
I am here: http://tapatalk.com/map.php?inlvph

[SID210SA]

Got 4.10's on it today....will let you know the verdict tomorrow.

[fastblackmerc]

Got 4.10's on it today....will let you know the verdict tomorrow.

Let me guess.....

The verdict is..........

:up: :up: :up: :up:

You'll be wondering why you didn't do it sooner!

[slickster]

Ran a 14.769 @95 mph. R/t .809. 67deg

[Roadwarrior]

Finally had a leaking rear engine main seal & a "weeping" rear output shaft seal of the transmission :shake: replaced by my trusted local mechanic. Had these issues a few months after purchasing the Marauder last year :dunno: . While the transmission was off the car, the front transmission seal behind the torque converter was replaced as "cheap insurance". I had been checking fluid levels religiously then & will still continue to due so when I pick up the car tomorrow & thereafter, so I can do this;--------->:drive: and :burn: :D . Also had the engine oil & oil filter changed. (using Motorcraft FL820-S filter).

[Horsepower]

Changed the oil ... Cleaned air filter .... Replace front tires with eagle gt's and finally had my fan fixed. Good day


---
I am here: http://tapatalk.com/map.php?k4muur

[Bradley G]

New rear tires installed, oil change & filter (syn), new fuel filter & new splice kit to install, ordered new supercharger belt.

[Bluerauder]

Wash and ICE'd. Gotta take it in for the annual safety inspection tomorrow. When it looks good ... I get Excellent service !!! :D The techs see so many neglected cars that they really appreciate one that has been taken care of.

[WhatsUpDOHC]

Stared at it and said " I will never cheat on you with another car ... Let's get married "


I'm a polygamist where cars are concerned.

I'll "wed" as many as many as I can afford.

None of them will care: I'll love all of them equally.

'Til death or Mecum/Barrett Jackson do us part.


Sent from my DROID RAZR using Tapatalk 2

[loud2004marquis]

Just got done installing the real autometer oil and volt gages and was glad the center gage pod went back in and seated nice and tight.

[SID210SA]

Let me guess.....

The verdict is..........

:up: :up: :up: :up:

You'll be wondering why you didn't do it sooner!

I finally got to get on it a bit yesterday after work...and her arse was all over the place.....gotta learn how to driver her all over again.....lots of wheel spin now but still didnt hammer it as I dont know which way its going to point when I put the hammer down. I dont want to go off into a stand of trees or over a curb, so I will have to find a nice wide open space to play.

[Horsepower]

I'm a polygamist where cars are concerned.

I'll "wed" as many as many as I can afford.

None of them will care: I'll love all of them equally.

'Til death or Mecum/Barrett Jackson do us part.


Sent from my DROID RAZR using Tapatalk 2

Lol


---
I am here: http://tapatalk.com/map.php?wr3zgb

[Horsepower]

Had to go back to Goodyear and have my front driver side bushing replaced. It never endshttp://img.tapatalk.com/a6936892-d087-9e18.jpg


---
I am here: http://tapatalk.com/map.php?gcipro

[DOOM]

Just washed and detailed it.

Picked a new set of rear tires! (thanks for the assist Birdman) :up:


Time to tear it up!!! :burn: :burnout: :burnout:

[slickster]

I finally got to get on it a bit yesterday after work...and her arse was all over the place.....gotta learn how to driver her all over again.....lots of wheel spin now but still didnt hammer it as I dont know which way its going to point when I put the hammer down. I dont want to go off into a stand of trees or over a curb, so I will have to find a nice wide open space to play.

How about from a stop light to about 50

[Panther]

Well since I got the Marauder about 2 months now I haven't seen or washed or drove my GTO so today I pulled it out and washed her and took her first drive. she started right up. She understands how it is. 29840


Sent from my iPhone using Tapatalk Panther

[MyBlackBeasts]

Now that gear install was completed, I can finish reinstalling the axle & other goodies!
http://i1102.photobucket.com/albums/g443/MyBlackBeasts/410install001.jpg
Axle back under car with cool new Control Arms & Watts Link from Sparta! Thanks Sparta dudes! :D

http://i1102.photobucket.com/albums/g443/MyBlackBeasts/410install002.jpg
http://i1102.photobucket.com/albums/g443/MyBlackBeasts/410install003.jpg
Finish off with some Industrial Black.

http://i1102.photobucket.com/albums/g443/MyBlackBeasts/410install004.jpg
http://i1102.photobucket.com/albums/g443/MyBlackBeasts/410install005.jpg
Add some new bearings & seals...

http://i1102.photobucket.com/albums/g443/MyBlackBeasts/410install006.jpg
http://i1102.photobucket.com/albums/g443/MyBlackBeasts/410install007.jpg
Then add 2 new 31-spline axles meshing with the new Cobra 31 spline carrier and getting close to finished. Hooked up most everything else, will finish tomorrow! :burnout:

[Bluerauder]

Wiped it down after the evening storms Friday night, shifted positions in the driveway and drove the Taurus to Maryland. :o

Its a good thing that the wife had the Bradford Pear tree taken down last November 'cause I don't think it would have stood up well to the winds that came through with the storms. Sustained winds of 70-80 MPH in what the news people are calling a "Derecho". Sometimes I think that they make this S#!t up.

[boatmangc]

Drove wife to Homey Depot today and noticed the A/C wasn't keeping up with the heat at low speeds. When I got home my waif says "what's that noise?" Me being inside the car said "it sounds like someone starting their Powerstroke". The I get out and she says you better listen again, I start it up and after a few seconds it sounds like the bottom end is coming out, then after maybe 30 seconds it stops, Hmmmm, after a little wait it starts again.
I guess my cooling fan took a dump today. But the car ran like a dream. and shined like a B!+ch!!

[guspech750]

Installed a Walbro GSS342 fuel pump.



Sent from my iPhone
Eaton Swap + 4.10's = Wreeeeeeeeeedom!!

[IwantmyMMnow!]

Sustained winds of 70-80 MPH in what the news people are calling a "Derecho". Sometimes I think that they make this S#!t up.

Derecho is a valid meteoroligical term. Spanish for 'straight',

a widespread and long-lived, violent convectively induced straight-line windstorm (http://en.wikipedia.org/wiki/Straight-line_wind) that is associated with a fast-moving band of severe thunderstorms (http://en.wikipedia.org/wiki/Thunderstorm) in the form of a squall line (http://en.wikipedia.org/wiki/Squall_line) usually taking the form of a bow echo (http://en.wikipedia.org/wiki/Bow_echo). Derechos blow in the direction of movement of their associated storms, similar to a gust front (http://en.wikipedia.org/wiki/Outflow_boundary), except that the wind is sustained and generally increases in strength behind the "gust" front. A warm weather phenomenon, derechos occur mostly in summer, especially June and July in the Northern Hemisphere (http://en.wikipedia.org/wiki/Northern_Hemisphere). They can occur at any time of the year and occur as frequently at night as in the daylight hours

[tbone]

Justbob installed a Walbro GSS342 fuel pump.



Sent from my iPhone
Eaton Swap + 4.10's = Wreeeeeeeeeedom!!

Fixed it for you!:banana2:

PS WTF is a pic of a Camaro doing on your avatar?

[justbob]

Fixed it for you!:banana2:

PS WTF is a pic of a Camaro doing on your avatar?

Ah no. He did it just like his last one.

Sent from my Ally while ruling the world from my toilet.

[Comin' in Hot]

Went to the u-pull it this morning, almost died of heat stroke, but walked out with a set of DOHC cam covers for 16 bucks!!!!

[MyBlackBeasts]

Finished the 4.10 install today!

New fresh powdercoated axle housing
4.10s installed
31 spline Cobra carrier & axles
New diff vent fitting & hose (to replace the missing one Ford forgot to install on assembly line)
CME Rear Control Arms & Watts Link

Drove short distance - wow! Just normal accel from SS or light = amazing difference!

Need to update tune, break in gears & then look out! WOT here we come! :D :burnout:

[guspech750]

Fixed it for you!:banana2:

PS WTF is a pic of a Camaro doing on your avatar?

LOL!!

That was my minty 1997 Camaro SS I had a few years ago with Taylor on the hood.


Sent from my iPhone
Eaton Swap + 4.10's = Wreeeeeeeeeedom!!

[MyBlackBeasts]

LOL!!

That was my minty 1997 Camaro SS I had a few years ago with Taylor on the hood.

I like your Camaro hood ornament! What did you use to keep it glued in place while motoring? :D

[guspech750]

I like your Camaro hood ornament! What did you use to keep it glued in place while motoring? :D

Her fingernail death grip into the fiberglass hood. :lol:


Sent from my iPhone
Eaton Swap + 4.10's = Wreeeeeeeeeedom!!

[ctrlraven]

Bought a used set of 04 Cobra heads.

[Curless]

Made an appointment to get the windows blacked out for tomorrow, working on ordering a stainless steel brake line kit.

[Bulldog5.0]

Installed my blue LED interior lights(dome/reading/entry/etc...), under hood, and trunk lights as well. I love the way the blue looks, and they are really bright... ;)

[Curless]

Black car, black windows! Love it, now for the rear shocks before we go home!

[stevesoasis]

Installed a new air compressor fron suncore, air ride is workin like a charm again!!!

[1stMerc]

Went to put S/c back on car this afternoon. Imagine my surprise at being greeted with this.
http://www.mercurymarauder.net/gallery/data/500/medium/IMG_00013.JPG (http://javascript<b></b>:;)
http://www.mercurymarauder.net/gallery/data/500/medium/IMG_00043.JPG (http://javascript<b></b>:;)

Three ribs eatin (no sauce, no smoke) and a big chunk gone. Good thing we had early dismissal at work. Stock belt put back on for visit to dealer for ABS check and driesr/receiver replacement.That was two Saturday's ago.
And to think, i was going to wait till Saturday to put it back on :eek:.

[IwantmyMMnow!]

Installed my blue LED interior lights(dome/reading/entry/etc...), under hood, and trunk lights as well. I love the way the blue looks, and they are really bright... ;)

Wow....great minds think alike? Got any pics?

[Comin' in Hot]

Dropped the trans pan, replaced the filter, installed a drain plug on my black mm today. I decided to get a 2 mil drop cloth from home depot to lay down first. BEST. IDEA. EVER.

[ctrlraven]

"New" used cobra heads got delivered today. Had no clue they were coming with the cobra manifolds as well. I removed the manifolds and looked the heads over. Either going to take them and get hot tanked or just spend the day with degreaser cleaning them up.
https://sphotos.xx.fbcdn.net/hphotos-snc7/375695_2955444543705_211356861 7_n.jpg

[RacerX]

Installed slightly used coils (they look brand new!!!). Got em for $90. The misfires are gone!!!! Back to the dyno!

http://www.mercurymarauder.net/gallery/data/628/medium/DSC05241.JPG (javascript:;)
http://www.mercurymarauder.net/gallery/data/628/medium/DSC05242.JPG (javascript:;)

[05crownsport]

Oil change, rotate tires, and due to my obsessive compulsive behavior...did a little cleaning!
http://i1126.photobucket.com/albums/l610/05crownsport/2012-07-09_20-36-49_645.jpg
http://i1126.photobucket.com/albums/l610/05crownsport/2012-07-09_20-36-39_906.jpg
http://i1126.photobucket.com/albums/l610/05crownsport/2012-07-09_20-39-24_308.jpg