What did you do to your car today?

[loud2004marquis]

Is that the 16 mile and Crocker area?

[lji372]

34073

Got'm all washed
The outsides anyway

[cat in the hat]

Trying to get my *&^%$# LCM out. Putting BC4E dead pedal in while I'm under there.

[Mebot]

34073

Got'm all washed
The outsides anyway


Looking sharp! :beer:

[guspech750]

34073

Got'm all washed
The outsides anyway

Looking good Jerry!!


Sent from my iPhone 4S

DTR + 4.10's + Eaton swap = Wreeeeeeeeeeeeeeedom

[rocky]

34073

Got'm all washed
The outsides anyway

Nice, love the Stang!


Sent from my iPhone 5

[MOTOWN]

Nothing! but i did renew my membership and got my cool little flags back! Thanks .net

[Roadwarrior]

Drove my Marauder home from attending Saturday's car show today, but took the scenic route home {meaning more miles} despite the dreary day & cooler than normal temps. :2thumbs:

[loud2004marquis]

Cleaned and polished one rim inside and out the best I could, was very pleased by the difference!

Before:
http://www.supermotors.net/getfile/979453/fullsize/1-rim-off-car.jpg

After:
http://www.supermotors.net/getfile/979458/fullsize/6-mothers-by-hand.jpg

On the car before:
http://www.supermotors.net/getfile/979470/fullsize/rim-before1.jpg

On the car after:
http://www.supermotors.net/getfile/979471/fullsize/rim-16.jpg

Three more to go!

[lji372]

Cleaned and polished one rim inside and out the best I could, was very pleased by the difference!

Before:
http://www.supermotors.net/getfile/979453/fullsize/1-rim-off-car.jpg

After:
http://www.supermotors.net/getfile/979458/fullsize/6-mothers-by-hand.jpg

On the car before:
http://www.supermotors.net/getfile/979470/fullsize/rim-before1.jpg

On the car after:
http://www.supermotors.net/getfile/979471/fullsize/rim-16.jpg

Three more to go!

Looking good :beer:

This is what I am planning on doing this week. Along with the daunting task of getting the engine bay cleaned and aluminum re polished. Started the engine a little bit today, Holy smoke batman it is filthy. Got a buddy who is coming over to help out and show me how it's done. Gonna be a long week but at least temps are rising :D

[L.Mark]

Looks good!!! Whats the opinion of painting the inside of the rims either silver black or DTR body color? Thought about this but was waiting to see if some else had done it...

[lji372]

Looks good!!! Whats the opinion of painting the inside of the rims either silver black or DTR body color? Thought about this but was waiting to see if some else had done it...

My opinions are to each his own. If you like it do it! You can only make one person happy pick yourself :D:beer:

[L.Mark]

Agree 100%. But If I see someone elses and don't like it then I won't make myself unhappy for doing something I didn't like. OK, now I dizzy...:P:P:P

[Limited360]

Washed it... got dark when I was drying it!!

https://fbcdn-sphotos-d-a.akamaihd.net/hphotos-ak-ash4/375087_10151355748191784_10871 16725_n.jpg

[ctrlraven]

Installed a new HID kit in my MM. The hi/lo controller on the old system had some corrosion on it again and didn't feel like cleaning it. The old kit used different plugs so had to put in a new kit to use with the new hi/lo controller.

I like the new system high beam, it tilts the bulb up unlike the old one system which used activated a magnet to retract the bulb back to shift the light beam pattern up to simulate high beams.

[LostInTennessee]

Installed a new HID kit in my MM. The hi/lo controller on the old system had some corrosion on it again and didn't feel like cleaning it. The old kit used different plugs so had to put in a new kit to use with the new hi/lo controller.

Where did you get the new HID kit if I may ask?

[ctrlraven]

Where did you get the new HID kit if I may ask?
DDMtuning.com My old kit was a DDM unit as well.

[Shaijack]

Lets see. 1) cleaned Red, will wax tomorrow, got state inspection (two year inspections here).. 2) took out Blue, wanted to feel the fast breeze blowing through my hair and smell burning rubber. 3) looked at Black, my step child. Tllk my old military uniforms out of the trunk. Cleaning them and giving them to my grand son.

[RacerX]

More fuel!

http://www.mercurymarauder.net/gallery/data/579/medium/IMG_1028a.jpg (javascript:;)

[Limited360]

More fuel!

http://www.mercurymarauder.net/gallery/data/579/medium/IMG_1028a.jpg (http://javascript<b></b>:;)


Great product!!! Just sold two of these from my previous vehicle build!

[loud2004marquis]

Had to run to the store at work and set off someones alarm when I started the car. Another one of my coworkers commented on the marauder and said I'm off the chain.

[tbone]

Enjoyed compliments and questions from the salesmen at the local Buick/GMC dealer that I applied to work at today........

[jerrym3]

Sunday: barely got the Galaxie started at a friend's house; drove it home, pulled the starter

Monday/Tuesday: got the starter rebuilt

Wednesday: installed the starter; kicks over like a new car, warm or cold

Big test will be on a hot, muggy, summer day, but the new starter and new battery did the trick, so far.

Next project, replace power steering return hose and rear quarter window weatherstripping.

[VMARAUDER]

Got the windshield replaced...those damn stones on the e-way

[Windsor58]

Just got a new trunk emblem from Daniel. It is gorgeous. Absolutely beautiful workmanship. I highly recommend it. Here's a poor shot from my cell (sorry for the quality...):

Car comes back next week after a full repaint (same color - black, of course). Can't wait.

[ctrlraven]

Changed out my air filter to a clean one and cleaned the MAFS as well.

[NavySeabee]

Pulled each wheel off, cleaned the inside rims with diluted Simple Green & some 0000 steel wool, and waxed 'em. WOW! Cleaned tips also with NevrDull. 4 hours. It's beer thirty! :beer:

[loud2004marquis]

Pulled each wheel off, cleaned the inside rims with diluted Simple Green & some 0000 steel wool, and waxed 'em. WOW! Cleaned tips also with NevrDull. 4 hours. It's beer thirty!

Post some pics of those bad boys!

[NavySeabee]

Post some pics of those bad boys!

Pics tomorrow ----> car show/fair in Westerly, RI.

[loud2004marquis]

Fixed the rear bumper sag, used a piece of aluminum angle stock bolted to the frame to do it.

Before:
http://www.supermotors.net/getfile/980470/fullsize/megs4tipsbumpersag.jpg

After:
http://www.supermotors.net/getfile/980471/fullsize/bumper-cover-fixed.jpg

[NavySeabee]

Fixed the rear bumper sag, used a piece of aluminum angle stock bolted to the frame to do it.

Before:
http://www.supermotors.net/getfile/980470/fullsize/megs4tipsbumpersag.jpg

After:
http://www.supermotors.net/getfile/980471/fullsize/bumper-cover-fixed.jpg

Nice job! I need to do this myself.

[MarauderMike]

Ordered Nittos for the front and rear! :burn:

[RR|Suki]

This:
O0v-hhPcCJs

[DS650]

Cleaned off those &#%$ love bugs!:cool:

[guspech750]

I've done absolutely nothing to it in over a month, not even driven it. It's collecting lots of dust.


Sent from my iPhone 4S

DTR + 4.10's + Eaton swap = Wreeeeeeeeeeeeeeedom

[NavySeabee]

Got bored.....no rain for next few days, so detailed.

[Mr. Man]

Got bored.....no rain for next few days, so detailed.
Looks great! Larry's got his work cut out this year.:)

[NavySeabee]

Looks great! Larry's got his work cut out this year.:)

Don't look too close. I've got more chips than Frito-Lay! :bandit:

[Comin' in Hot]

I started installing my air/fuel gauge lasts night, realized the how much of a disaster my alarm system wiring was and spent the next 10 hours tearing it out and fixing the butcher job. While I was at it, I fixed the *****ty moonroof wiring.

On a positive note, the car started when I was done, the keyless entry pad works again, and I installed the gauge and it's harness, now all I have to do is drop the exhaust and weld in the O2 bung.

[loud2004marquis]

I started installing my air/fuel gauge lasts night

What brand/model did you go with?

[Comin' in Hot]

What brand/model did you go with?

I went with an Autometer Ultra-Lite model 4378

http://www.summitracing.com/parts/atm-4378/media/images

[Invader]

I installed the Console Bucket I got from Mebot. But I might pull it back out and use my old lid. The leathers in a little better shape. While I had it apart I noticed one of the clips is missing. And where it is screwed at the bracket is all cracked to hell. I glued what I could, anything is an improvement than what was there. So on that note. If anyone has a Minty Fresh Charcoal Grey Center-Console for Sale please PM me!

[LeoVampire]

Got bored.....no rain for next few days, so detailed.

Looks awesome! Nothing like seeing the love a guy has for his car reflected!

[rocky]

Drove my 6 and 9 year old and their 10 yr old friend to WWE RAW here in Tulsa at the BOK center. Not the biggest wrestling fan but they love it and can't beat free suite tickets:)


Sent from my iPhone 5

[L.Mark]

Looks awesome! Nothing like seeing the love a guy has for his car reflected!


Hey, what's the color on the valve covers? Love the color...

[vtwoodsman]

Got an overdue all wheel alignment. Rear end was right on the money, and front end
calibrated to spec's CarFixer posted a while back. All was in factory green when started, now I should see more even wear on the fronts. At least I have a base line. Alignment tech was excellent: took his time and did it right.
Washed and vacuumed car. Noticed some paint fade on the front hood; clear coat is in excellent condition though. Probably a combination of sun, heat, and marginal factory paint. New tread all the way around mounted on chrome aftermarket rims, plus force balanced recently. Pretty much ready for the Ford National trip to Penna.

[larryo340]

Today I gave it it's weekly bath and installed a pair of NEW OEM headlamp assembiles with the Sylvania ZXE bulbs I bought from NXSbob...while I was at it I also put the Xpel headlight protection film on the new headlamps. I'll tell you that stuff is way thicker than I thought it would be. I didn't put it on the fogs or marker lamps yet...although I should put it on the fogs since they're only a couple of months old. I plan to get new marker lamps at which time I'll install the Xpel.


http://i299.photobucket.com/albums/mm288/larryo340/My%20Marauder/100_0633_zps124accdc.jpg

http://i299.photobucket.com/albums/mm288/larryo340/My%20Marauder/100_0652_zps4880e7e8.jpg

I also decided it was time to upgrade the dash backlighting since I felt it was too dark. I removed the cluster and used a combination of white SMD LED's and a green SMD LED strip. Overall I'm very happy with it with the exception that on the tach there is a dark area by the 4,000 RPM digit. When I have time I'll open it up and rearrange the strip, but I can live with it for awhile.
Side note...It was the first time the dashboard panels were removed for sure, and I hope I don't end up with squeaks and rattles.

I also really like the green tint to the odometers due to the green LED strip :D

http://i299.photobucket.com/albums/mm288/larryo340/My%20Marauder/100_0645_zps07c6778b.jpg

Very short video:

http://www.youtube.com/watch?feature=player_detailpag e&v=-PdRC4c8UnY

[LeoVampire]

Hey, what's the color on the valve covers? Love the color...

It is a gold metallic flake that is made by VHT


http://www.vhtpaint.com/products/enginemetallic/

I also matched the new brake work to the engine color to tie it all in.
Wanted to go with the idea of the 390 T-Bird engine big block colors Marauders had back in the 60's and 70's seeing our cars are an anniversary car.

[LeoVampire]

Today I gave it it's weekly bath and installed a pair of NEW OEM headlamp assembiles with the Sylvania ZXE bulbs I bought from NXSbob...while I was at it I also put the Xpel headlight protection film on the new headlamps. I'll tell you that stuff is way thicker than I thought it would be. I didn't put it on the fogs or marker lamps yet...although I should put it on the fogs since they're only a couple of months old. I plan to get new marker lamps at which time I'll install the Xpel.


http://i299.photobucket.com/albums/mm288/larryo340/My%20Marauder/100_0633_zps124accdc.jpg

http://i299.photobucket.com/albums/mm288/larryo340/My%20Marauder/100_0652_zps4880e7e8.jpg

I also decided it was time to upgrade the dash backlighting since I felt it was too dark. I removed the cluster and used a combination of white SMD LED's and a green SMD LED strip. Overall I'm very happy with it with the exception that on the tach there is a dark area by the 4,000 RPM digit. When I have time I'll open it up and rearrange the strip, but I can live with it for awhile.
Side note...It was the first time the dashboard panels were removed for sure, and I hope I don't end up with squeaks and rattles.

I also really like the green tint to the odometers due to the green LED strip :D

http://i299.photobucket.com/albums/mm288/larryo340/My%20Marauder/100_0645_zps07c6778b.jpg

Very short video:

http://www.youtube.com/watch?feature=player_detailpag e&v=-PdRC4c8UnY


Car and dash looks great!

[Gryphonzus]

I removed the Belt tensioner assembly and both Idler pulleys. Now I have to go find and buy the replacement parts. then comes the fun part of putting it all back together. Especially since it has the vortech supercharger, man that makes it a pain in the gluteus maximus! And then remembering how to route the belt! :mad2:

[L.Mark]

It is a gold metallic flake that is made by VHT


http://www.vhtpaint.com/products/enginemetallic/

I also matched the new brake work to the engine color to tie it all in.
Wanted to go with the idea of the 390 T-Bird engine big block colors Marauders had back in the 60's and 70's seeing our cars are an anniversary car.


Thanks, think I found my color...

[1Marauder]

I feel in Love with my 300A.

Woke up at 6:45am, went outside in my boxers and tee shirt (boxers were clean, car was clean), and drywashed and then waxed my hood, roof, rear deck, and sides down to molding.

Showered, dressed (casual day), and drove the kids to school in the NEW Marauder.

Discovered from a fellow Marauder that in town the car drives better with O/D off... so I tried it around town. Went for a 10 miles cruise and PASSED MY CA SMOG with CAI, TUNE, etc... Smog Guy said it ran cleaner than an NEW HONDA LEV... and was clearly impressed and interested in car (he may just have been a saleman!).

Drove the Marauder some more, and then delivered it to the WHEEL SPECIALISTS who are going to strip down and re-clear coat my 15,000 VIRGIN miles wheels (1st rubber change - just 2 weeks ago -- no marks whatsoever) to repair damage to each wheel's clearcoat where the tire guy tried to get the glue off from the showroom weights and "cleaned the wheels for me" get this... with a steel brillo pad. Yes, as the wheels were SHOWROOM NEW --I , a grown man, felt like fighting, or crying, or perhaps both at he same time.

Tire shop is old cool friend and paying for repair. Wheel shop owner is cool, andwas resealing Ferari wheels while I was there. Repair place said they's strip, buff, polish, re-clear thicker, and repolish much better than the "very very thin original stock coat" and that the insides would be nearly perfect...

So my Marauder (I think his name is Damien), is sitting on a stand, wheel-less for the next week.

And yes, I showed them the AIR SUSPENSION off switch. With my luck....

[Baconbit]

Well....before I went to Louisville I had the EMP water pump, UDP's, Granatelli coil connectors, Mo tune(Thanks Mo!), FRPP shorty headers and x-pipe installed along with normal cleaning of everything and powder coated valve covers and xover pipe installed. I love the new power but the sound of the exhaust left me wanting more. Factory tips were drowning out the sound sooooo.....I got a set of 4" res-delete tips installed and I love it! Changed the entire sound of the car now she sounds mean:beer:

[slickster]

Removed all tires scrubbed inner wheels with scotch brite pads. Clay and zanio wax the outer Wheels

[maineiac]

got rejected for the third time by the shop puttin in my 410's,WTF!!!!!

[lji372]

Thanks, think I found my color...
FIXED
yep, you did :D

i left mine home today and drove the saturn:(

i'm trying to save a little gas money so i can buy more wheels:D

[MyBlackBeasts]

got rejected for the third time by the shop puttin in my 410's,WTF!!!!!

Rejected? What does that mean? :confused:

[Mr. Man]

Rejected? What does that mean? :confused:
They keep canceling his install.

[MyBlackBeasts]

They keep canceling his install.

That's BS! :mad2:

Screw them, if they don't want your money go somewhere else.

Gear swap is easy work & plenty of good tech's around to do it. Just ask for referrals!

Hope you get it done soon - you'll love it! :burnout:

[rocky]

got rejected for the third time by the shop puttin in my 410's,WTF!!!!!

That's bs if you were in my area I'd hook you up with my guy! Hope somebody close to you chimes in with a good source, good luck!


Sent from my iPhone 5

[Limited360]

Put her back into official garage queen status...

Wrapped up my last calibration project at the end of April, so been driving it daily for two weeks. I love this car!!!

I did however go to the dark side for a daily driver / winter beater....

https://fbcdn-sphotos-a-a.akamaihd.net/hphotos-ak-frc3/969883_10151368654481784_92773 5821_n.jpg

[fastblackmerc]

Upgraded my rearview mirrors.

Will be working on the overhead console this weekend.

[rocky]

Had a beast of a terminator cobra pull up to me and pace next to me on the hwy, sounded SICK and had drag lites. Rolled down my window and smiled and shook my head, they laughed gave me a thumbs up and nailed it...wish I had got a pic but I was driving lol.


Sent from my iPhone 5

[rocky]

Upgraded my rearview mirrors.

Will be working on the overhead console this weekend.

Upgrade rearviews??? Signal mirrors or something?



Sent from my iPhone 5

[larryo340]

Upgrade rearviews??? Signal mirrors or something?



Sent from my iPhone 5
You've peeked my curiosity as well ....do tell

[ctrlraven]

Wash, clay bar, polish and waxed the MM and the wheels also.

I forgot how depressing it is when you clay bar cause you end up seeing every defect in the paint but she is super smooth.

[loud2004marquis]

Wash, clay bar, polish and waxed the MM and the wheels also.

I forgot how depressing it is when you clay bar cause you end up seeing every defect in the paint but she is super smooth.

What brand of clay do you use?

[maineiac]

Rejected? What does that mean? :confused:
Left the MM with them for two weeks an hour and a half drive away and when i got back to pick it up ,it hadent moved all covered with dirt and they said they didnt have time to do it,last time I will consider givin them some of my money.

[BlackJack]

Lidio tune after the 4:10s were swapped in a few weeks back. Upped shift pressure 20% on all WOT shifts. Weird with a big cushy suspensioned car shifting hard enough to get the nose to jump up on a run up to 60mph.

Sent from my SPH-L710 using Tapatalk 2

[Vortech347]

Installed a BAP on a friend's 03' Cobra then did a pulley swap on a another friend's 04' Cobra.

[ctrlraven]

What brand of clay do you use?
I use this. http://www.autogeek.net/woclco.html

Only hints of close to 200k miles on the body is the nicks and chips in the paint

I forgot I ran out of sealant so I just used a nano wax. I prefer to use this sealant over a wax http://www.autogeek.net/wg5500.html

[ctrlraven]

Lidio tune after the 4:10s were swapped in a few weeks back. Upped shift pressure 20% on all WOT shifts. Weird with a big cushy suspensioned car shifting hard enough to get the nose to jump up on a run up to 60mph.

Sent from my SPH-L710 using Tapatalk 2

Get the j-mod and then you'll have to back the shift pressure down to 0 or 5% otherwise it will feel like you are going to break something.

[Mr. Man]

Started to clean up the SB for Carlisle. Big job oye vey! Still not done, then cruised over to the local Thursday cruise nite and hung out with it.

[loud2004marquis]

Just drove it into work and parked in the boss' spot.

[Guittard22]

Got a few more parts today for my trilogy build :)

[MarauderJim]

Doom commented that my fuel rail was dirty in NH.
So I replaced it and I changed the alternater to a new one that is powder coated. I also swapped out my winter storage tires to my Nittos too!

Jim. :beer:

[loud2004marquis]

Drove it about two hundred miles on the freeway @ 80 with the windows and moonroof open. Then washed all the bugs off and put it in the garage.

[tbone]

Picked up a couple new Ultra Lite gauges. Trans temp and Boost/Manifold pressure. I'll use the boost guage for manifold pressure until I get Eatonized. Picking up a guage pod from Brandon (lowbuckMM) after work. :beer:

[slickster]

Motorcraft battery

[SC Cheesehead]

Detailed the engine bay and Croftgate Clean & Wax to the outside, got my Aeroforce Interceptor programmed to monitor my A/F ratio, and got the trunk all packed up for the trip up the W.C. tomorrow morning.

[guspech750]

Detailed the engine bay and Croftgate Clean & Wax to the outside, got my Aeroforce Interceptor programmed to monitor my A/F ratio, and got the trunk all packed up for the trip up the W.C. tomorrow morning.

Woooooooooo Hoooooooooooo!!


Sent from my iPhone 4S

DTR + 4.10's + Eaton swap = Wreeeeeeeeeeeeeeedom

[SC Cheesehead]

Woooooooooo Hoooooooooooo!!


Sent from my iPhone 4S

DTR + 4.10's + Eaton swap = Wreeeeeeeeeeeeeeedom

http://external.ak.fbcdn.net/safe_image.php?d=AQCI-BsOKNz7zd6V&url=http%3A%2F%2Fi2.ytimg.com% 2Fvi%2FarZdeg_fL-I%2Fmqdefault.jpg&jq=100

Oh boy, this is gonna be GREAT!!!

[justbob]

I put about 300 miles on and enjoyed the weather.

Also represented at Deans Performance dyno day.

http://m.youtube.com/watch?v=122YrjxYCIk


Self proclaimed Builder Of Badassery.

Buy it, Break it, Build it BETTER.
"Since 2004"

[MOTOWN]

I put about 300 miles on and enjoyed the weather.

Also represented at Deans Performance dyno day.

http://m.youtube.com/watch?v=122YrjxYCIk


Self proclaimed Builder Of Badassery.

Buy it, Break it, Build it BETTER.
"Since 2004"

Sounded mean on the dyno!:eek:

[justbob]

Thanks. Here's a funnier version. Check out the guy getting the hell outa dodge! LMAO
http://m.youtube.com/watch?v=cN9RI30HvgA


Self proclaimed Builder Of Badassery.

Buy it, Break it, Build it BETTER.
"Since 2004"

[ctrlraven]

Had the rear diff fluid changed.

[MyBlackBeasts]

Had the rear diff fluid changed.

You just did that in Post #1!!!
http://www.mercurymarauder.net/forums/showpost.php?p=857607&postcount=1

:lol: :lol: :lol:

[ajdereicup]

Dropped my car off at a members house to get some work done. I know its in good hands and I'll be happy with it when its done. And got to ride in his bad ass car

[ncmm]

We need some rain so I decided to wash and detail my Silver Birch

[mylow907]

Looks better in person

[Go2GuyFL]

See http://www.mercurymarauder.net/forums/showpost.php?p=1300098

[Comin' in Hot]

I finished my AF gauge install: dropped my exhaust and welded in the bung. Of course I broke a bolt in the passenger side collector of my cobra shorties. So I drilled it out and used a nut and bolt instead of threading it into the collector flange.

[fastblackmerc]

Upgraded my rearview mirrors.

Will be working on the overhead console this weekend.

Got the mirrors installed, have to finish the wiring tomorrow.

Did a couple of other things. :banana2::banana2:

[Guittard22]

Car show today :)

[Davesvt2000]

I moved mine forward a few feet so I could take out the Boss 302 :flamer:

[larryo340]

Got the mirrors installed, have to finish the wiring tomorrow.

Did a couple of other things. :banana2::banana2:
Upgraded how ??

[fastblackmerc]

Upgraded how ??

Will have pics in a couple of days......

[beantown mm]

I moved mine forward a few feet so I could take out the Boss 302 :flamer:

ok, off topic, share some pics of the 302 man, thanks....

[Davesvt2000]

I'll be at Bass Pro shop show Thurs. night..

[Jeronimojc]

I've done a few things in the last few days:
Installed a Pioneer head unit (avh-p3400bh) with steering wheel controls and parking break bypass.
Installed a JL Audio 6W3V3-4 Subwoofer (6-1/2" - 4ohm). I had to modify the OEM subwoofer box with a heat-gun. Pretty easy actually.
Changed differential oil - long story on issues regarding installation of 4.10s.
Changed car battery.
:burnout:

[Windsor58]

Got a little carried away with the buffer..........

[MOTOWN]

Got a little carried away with the buffer..........

Dayuum! dat buffer musta had 250 grit on it:eek::lol:

[guspech750]

Got a little carried away with the buffer..........

Sweet. Keep us posted on the outcome.

Same black paint or a different shade of black?


Sent from The White House on taxpayers dimes.

DTR + 4.10's + Eaton swap = Wreeeeeeeeeeeeeeedom

[justbob]

Got another BIG thumbs up from a new Shelby owner. That's like the fifth time in the last year alone! That means a lot when owners of a car worth three times or more gives that kind of respect.


Self proclaimed Builder Of Badassery.

Buy it, Break it, Build it BETTER.
"Since 2004"

[Windsor58]

Sweet. Keep us posted on the outcome.

Same black paint or a different shade of black?


Sent from The White House on taxpayers dimes.

DTR + 4.10's + Eaton swap = Wreeeeeeeeeeeeeeedom

After looking at a whole lot of paint samples, I wound up going with the same black. My second choice was the current black on new Lincolns. It has a lot of fine flake in it, but in the sun, it just looks a bit too gaudy. The plain black just looks the best and the meanest IMHO. Should look real nice when they get it done, and no more bubbling paint (that's why it had to go down to bare metal). I will post pictures when I get it back. Likely next week, I think.
:burnout:

[guspech750]

After looking at a whole lot of paint samples, I wound up going with the same black. My second choice was the current black on new Lincolns. It has a lot of fine flake in it, but in the sun, it just looks a bit too gaudy. The plain black just looks the best and the meanest IMHO. Should look real nice when they get it done, and no more bubbling paint (that's why it had to go down to bare metal). I will post pictures when I get it back. Likely next week, I think.
:burnout:

Awesome man. I hope I turns out great. Judging by the picture. It's all under control.


Sent from The White House on taxpayers dimes.

DTR + 4.10's + Eaton swap = Wreeeeeeeeeeeeeeedom

[2ndmm]

I used the turtle wax black box, and it seemed to take away some of my ring worms lololol, really worked well for me.

[RacerX]

This thingamajigger fell out of my fuel tank...


http://www.mercurymarauder.net/gallery/data/579/medium/IMG_1034a.jpg (javascript:;)

[Mr. Man]

This thingamajigger fell out of my fuel tank...


http://www.mercurymarauder.net/gallery/data/579/medium/IMG_1034a.jpg (http://javascript<b></b>:;)You know smokin' weed by the fuel tank is dangerous :rasta: :D

[Krytin]

You know smokin' weed by the fuel tank is dangerous :rasta: :D
You said you didn't know anything about that!!:lol:

[Mr. Man]

You said you didn't know anything about that!!:lol:

https://encrypted-tbn1.gstatic.com/images?q=tbn:ANd9GcRGDI6_8h2mO H6bq2qUegQtPUPnTYo3vEAAk0-tjdXeDmPL3du0 (http://www.google.com/url?sa=i&rct=j&q=&esrc=s&frm=1&source=images&cd=&cad=rja&docid=sd5IX83Yr22aNM&tbnid=nIxBVHQNoz8L6M:&ved=0CAUQjRw&url=http%3A%2F%2Fcommons.wikim edia.org%2Fwiki%2FFile%3AWho_i s_responsible_not_me.jpg&ei=9emoUam6K_Wt4APxkIHQCw&bvm=bv.47244034,d.dmg&psig=AFQjCNHTQQI8zFz4TOYkNp3x3 kznSMnbkQ&ust=1370110627272389)..:coolma n:

[RacerX]

New, new, new...

http://www.mercurymarauder.net/gallery/data/579/medium/IMG_1041a.jpg (javascript:;)

[Black Dynamite]

A few years ago I made my own custom front and rear emblems. It was time for a repaint so I decided to try plasti-dip with glossifier instead. Gave me a chance to try out S55 on my reversing lights too. Came out alright. Looks good in the garage or in the shade. In the bright sun it looks more grey than black.


https://lh6.googleusercontent.com/-lJorWsPpaD8/Ua00maLnD8I/AAAAAAAAAHg/nVl_g83PR2o/s1023/IMAG0164.jpg

and

https://lh6.googleusercontent.com/-su3UPvEwAcc/Ua00p1jtpRI/AAAAAAAAAHk/i_reWpe7rAA/s1023/IMAG0163.jpg

[fastblackmerc]

Upgraded my rearview mirrors.

Will be working on the overhead console this weekend.

Here is a video of my newly customized rear view mirrors.

http://s167.photobucket.com/user/fastblackmerc/media/Videos/DSCN0005_zps230dfc9e.mp4.html

[fastblackmerc]

Added LEDs to the front door storage pockets. Might be hard to see.....

http://s167.photobucket.com/user/fastblackmerc/media/Videos/DSCN0006_zps343741ef.mp4.html

[fastblackmerc]

Swapped out the right side backup light LED for a HID bulb.

I think I'll do the other side.

http://s167.photobucket.com/user/fastblackmerc/media/Videos/DSCN0007_zpsf23ff235.mp4.html

[MOTOWN]

Installed my Colex caps! thanks Daniel!

http://i1020.photobucket.com/albums/af324/sims36/20130604_170940_zpsd988194a.jp g

[Mebot]

Ooh! Shiny!

sent from my new Galaxy S4!

[VMARAUDER]

I SeaFoamed it and then drove like a bat out of hell.
Next up are my coil covers from Daniel at Colex along with new cops and plugs and fuel filter.

[VMARAUDER]

Installed my Colex caps! thanks Daniel!

http://i1020.photobucket.com/albums/af324/sims36/20130604_170940_zpsd988194a.jp g

Man that is beautiful under the hood

[L.Mark]

That is mighty purtty...:D

[L.Mark]

Cleaned her up to get ready for enter her in the Valley View car show. Second time I will have put a car in the car show. First time was the 79 Mark V in carl Casper.:D

[L.Mark]

OK, so two things got cleaned up today...

[guspech750]

I looked at how dirty it is right now. Just been driving it a lot lately and I have not cared about keeping it clean. Just been caring about driving it.


Sent from The White House on taxpayers dimes.

DTR + 4.10's + Eaton swap = Wreeeeeeeeeeeeeeedom

[L.Mark]

I looked at how dirty it is right now. Just been driving it a lot lately and I have not cared about keeping it clean. Just been caring about driving it.


Sent from The White House on taxpayers dimes.

DTR + 4.10's + Eaton swap = Wreeeeeeeeeeeeeeedom

I feel ya on that...

[SC Cheesehead]

Rear cooling mod, J-mod, tranny fluid and filter change, trans tune, plus a boat load of incidental stuff; all performed by the skilled hand of the Zackmeister.

[Roadwarrior]

Oil change on both cars with Mobil 1 5w-30, Motorcraft FL-820S oil filter & new fuel filters.

[lji372]

Took her to the track. My first time to the track.
12.225 couldn't get the nitto's to hook. Next time I take the slicks. I was told it wasn't warm enough for the nitto's:(
It started in the mid 50's and got up to about 65.
Tire pressures from 16-18 no difference. Feathering off the line resulted in slower times. Just not experienced enough...yet ;)

I beat a ricer and this guy, he needs a new plate :D
34658

[rocky]

Took her to the track. My first time to the track.
12.225 couldn't get the nitto's to hook. Next time I take the slicks. I was told it wasn't warm enough for the nitto's:(
It started in the mid 50's and got up to about 65.
Tire pressures from 16-18 no difference. Feathering off the line resulted in slower times. Just not experienced enough...yet ;)

I beat a ricer and this guy, he needs a new plate :D
34658

Nice!


Sent from my iPhone 5

[Baconbit]

Went to a local car show yesterday with about 200 cars and went to a show today with about 100 cars...didn't bring home any new hardware oh well, everyone around here wants to give trophies to brand new mustangs crapmaros and such...whatevs, I enjoyed myself and the nice cars

[loud2004marquis]

Cleaned up the interior a little with some new mats that came in today.

Here's the OEM mats with 30,000 miles on them from the previous owner:
http://www.supermotors.net/getfile/985503/fullsize/marauder-oem-mat.jpg

And the redline mats:
http://www.supermotors.net/getfile/985504/fullsize/marauder-redline-mat.jpg

Now I have to clean the car!

[lwblumjr]

Hi all,

I finally got the window tint on the back door windows and rear windshield replaced on Friday. WOW, does it look better now! The rear windshield tint has been bubbled up for years now and the right rear door window was peeling badly. Even my wife remarked on how much better it looked. (She's not really into cars but likes driving the Marauder because it's a big, safe car with plenty of pickup.) The tint guy said mine was probably the last tint stripping he would do this season because it took so long. I dropped it off at the tinting shop after getting the oil, oil filter, air filter, and windshield wipers changed and running it through the car wash. It still looks pretty good even with 211K miles on her. :)

[rauder2003]

I want cam this motor anybody have any insight

[fastblackmerc]

I want cam this motor anybody have any insight

You need to type with good grammar and then we might be able to help you.

[justbob]

I want cam this motor anybody have any insight

Come again?

If you are referring to cams as I think you are, then you start at the $1299.00 base level for cams only, then find out you should have bought the heavier springs for another $400 or so, plus retainers, keepers, ETC. Don't forget to buy adjustable gears, key ways, degree kit, and the Ford supplement kit for another $300 or so. By now you probably also need a complete timing set for $450 from Ford Racing. But don't let me discourage you.

Oh wait, there is also labor!




Self proclaimed Builder Of Badassery.

Buy it, Break it, Build it BETTER.
"Since 2004"

[Mac-MerC]

Looked at it... Drove it... Enjoyed it...

[1stMerc]

Hi all,

I finally got the window tint on the back door windows and rear windshield replaced on Friday. WOW, does it look better now! The rear windshield tint has been bubbled up for years now and the right rear door window was peeling badly. Even my wife remarked on how much better it looked. (She's not really into cars but likes driving the Marauder because it's a big, safe car with plenty of pickup.) The tint guy said mine was probably the last tint stripping he would do this season because it took so long. I dropped it off at the tinting shop after getting the oil, oil filter, air filter, and windshield wipers changed and running it through the car wash. It still looks pretty good even with 211K miles on her. :)

How did they get around not damaging the antenna/defroster strips?

[ChiTownMaraud3r]

New front tires mounted, will mount new rears tomorrow!:banana:

[lwblumjr]

How did they get around not damaging the antenna/defroster strips?
1stMerc,

The old tint was in really bad shape and had been on quite a few years. The guy called to tell me it would probably ruin the defrost and my radio has the common problem with no reception so I told him to go ahead. It looks so much better now! I did try the defrost this morning when I worked off but it no longer works. :(

[loud2004marquis]

Hi all,

I finally got the window tint on the back door windows and rear windshield replaced on Friday. WOW, does it look better now! The rear windshield tint has been bubbled up for years now and the right rear door window was peeling badly. Even my wife remarked on how much better it looked. (She's not really into cars but likes driving the Marauder because it's a big, safe car with plenty of pickup.) The tint guy said mine was probably the last tint stripping he would do this season because it took so long. I dropped it off at the tinting shop after getting the oil, oil filter, air filter, and windshield wipers changed and running it through the car wash. It still looks pretty good even with 211K miles on her.

What percent tint did you get installed?

[lwblumjr]

What percent tint did you get installed?
Loud2004marquis,

It was replaced with the same percent used the first time, generally called Limo Tint. The front door windows are lighter. Originally all the side windows and rear windshield were the same but my wife got a ticket for tint on I-10 a little while after it was done and I had it replaced with a lighter, (legal) tint.

[1stMerc]

1stMerc,

The old tint was in really bad shape and had been on quite a few years. The guy called to tell me it would probably ruin the defrost and my radio has the common problem with no reception so I told him to go ahead. It looks so much better now! I did try the defrost this morning when I worked off but it no longer works. :(

Yeah, my tint has been on since 05 and rear window is showing little tiny air bubbles. Needs to be redone but don't want to take a chance on ruining the strips, so it stays for now.

[Shaijack]

Started all three and drove them.

[ctrlraven]

Picked up Mebot's MM yesterday and going to be install HIDs in the headlights and fogs today.

[Mebot]

Hooray!

sent from a Samsung Galaxy far far away...

[ctrlraven]

Hooray!

sent from a Samsung Galaxy far far away...

Forgot to mention new Audiophile radio installed and foam pad removed from top of sub. Noticed a big difference in sound quality and bass.

[Mebot]

I will have to invest in some dynamat for the doors now. another weekend project to add to my list.

[rocky]

Cooling fan went out, on my day off! AC is much colder now so I think it had been bad for a while


Sent from my iPhone 5

[Mebot]

got my HID headlights & fog lights in. Thanks Chris! Kind of hard to see in direct sunlight. ...

http://img.tapatalk.com/d/13/06/16/5eje5eje.jpg

http://img.tapatalk.com/d/13/06/16/me9ezyry.jpg



sent from a Samsung Galaxy far far away...

[Invader]

Installed my Martyo Badges finally.... Thanks Martyo!http://img.tapatalk.com/d/13/06/16/ha9ujany.jpg

[lji372]

Installed my Martyo Badges finally.... Thanks Martyo!http://img.tapatalk.com/d/13/06/16/ha9ujany.jpg

The ones on my ride are faded?? Look into something to protect them if that's possible

[marauder410]

yes MY MARTY0 BADGES ARE FADED TOO AFTER ONLY ONE YEAR AND ON ONE SIDE 2 OF THE LITTLE WHITE FLAG PEICES FELL OUTTT:eek::censor: HAD THIS HAPPEN TO ANYBODYES ELSE'S BADGES

[rocky]

yes MY MARTY0 BADGES ARE FADED TOO AFTER ONLY ONE YEAR AND ON ONE SIDE 2 OF THE LITTLE WHITE FLAG PEICES FELL OUTTT:eek::censor: HAD THIS HAPPEN TO ANYBODYES ELSE'S BADGES

ALLCAPPS can cause fade, deterioration and slight decrease in horsepower


Sent from my iPhone 5

[fastblackmerc]

yes MY MARTY0 BADGES ARE FADED TOO AFTER ONLY ONE YEAR AND ON ONE SIDE 2 OF THE LITTLE WHITE FLAG PEICES FELL OUTTT:eek::censor: HAD THIS HAPPEN TO ANYBODYES ELSE'S BADGES

Same happened to my original set.

Have a new set that I'm applying multiple coats of automotive clear coat to.

[Spectragod]

yes MY MARTY0 BADGES ARE FADED TOO AFTER ONLY ONE YEAR AND ON ONE SIDE 2 OF THE LITTLE WHITE FLAG PEICES FELL OUTTT:eek::censor: HAD THIS HAPPEN TO ANYBODYES ELSE'S BADGES

Nope, but I have spare sets, just in case.:D

[Windsor58]

Got a little carried away with the buffer..........

Got her back and she looks great!

[L.Mark]

Cleaned up the interior a little with some new mats that came in today.

Here's the OEM mats with 30,000 miles on them from the previous owner:
http://www.supermotors.net/getfile/985503/fullsize/marauder-oem-mat.jpg

And the redline mats:
http://www.supermotors.net/getfile/985504/fullsize/marauder-redline-mat.jpg

Now I have to clean the car!
DId you paint the vent and radio surround black???

[L.Mark]

1stMerc,

The old tint was in really bad shape and had been on quite a few years. The guy called to tell me it would probably ruin the defrost and my radio has the common problem with no reception so I told him to go ahead. It looks so much better now! I did try the defrost this morning when I worked off but it no longer works. :(

The tint on my Dad 87 Cougar had rippled. We took it to the Tint Shop when it was right beside Taylor's House of colors and they said it would be @ $100-150 to take the tint off without damaging the lines. Were they full of methane or can it be done???

[Jkmarauder]

Re sealed my front right head light did some polishing scratch repair and rim cleaning in the near future installing aero turbine mufflers

[loud2004marquis]

DId you paint the vent and radio surround black???

I did not.

[ctrlraven]

got my HID headlights & fog lights in. Thanks Chris! Kind of hard to see in direct sunlight. ...

sent from a Samsung Galaxy far far away...

Welcome good sir!

[clmrt]

88.5K miles

170 stat because I only drive it in the summer months and I drive the piss out of it.
FL820S filter - startup chatter noticeably reduced.
Fuel filter. No idea how long it had been in there.
Oil gauge/sender for peace of mind.

[LeoVampire]

Got her back and she looks great!

Congrats on the new paint job and glad your happy about how she looks!:banana2:

[Blk04MM]

Drove it to carmax to get a offer. They drove it told me my trans if failing it shifts way too hard (shift pressure up) I laughed, took my keys and let the exhaust say shut up find a new profession in their service tunnel as I left

[Guittard22]

Spent more money on my car again lol stay tuned :)

[loud2004marquis]

Superchargen parts?

[Comin' in Hot]

Installed my cam covers I picked up at Carlisle
http://img.tapatalk.com/d/13/06/19/zevezegy.jpg

[Guittard22]

got my HID headlights & fog lights in. Thanks Chris! Kind of hard to see in direct sunlight. ...

http://img.tapatalk.com/d/13/06/16/5eje5eje.jpg

http://img.tapatalk.com/d/13/06/16/me9ezyry.jpg



sent from a Samsung Galaxy far far away...



Looks good man nice marauder :)

[rocky]

Replaced all the blue LEDs with normal bulbs for a buyer that backed out on me...ugh


Sent from my iPhone 5

[ctrlraven]

Replaced all the blue LEDs with normal bulbs for a buyer that backed out on me...ugh


Sent from my iPhone 5

I've always learned to do things once money is in hand or in account.

[rocky]

I've always learned to do things once money is in hand or in account.

True
Think I'll put them in our minivan lol


Sent from my iPhone 5

[Mebot]

Installed my cam covers I picked up at Carlisle
http://img.tapatalk.com/d/13/06/19/zevezegy.jpg

That's awesome! the powdercoated blue cam covers look fantastic. How easy was this to install? did you do it yourself?

[Comin' in Hot]

I did it myself, It's a little more complicated on a Vortech car because the supercharger has to come off, it's doable but never want to do it again.

[slickster]

Got her back and she looks great!

Nice job......

[Limited360]

Was pissing me off when I looked at my retrofit's... lenses needed some love!!!

https://sphotos-a.xx.fbcdn.net/hphotos-ash3/184581_10151420929596784_10967 0172_n.jpg

after...

https://sphotos-b.xx.fbcdn.net/hphotos-ash4/999528_10151420929626784_97071 2340_n.jpg


She needs a bath... And a polish... And a wax... And a coat of chemical guys backlight!

https://fbcdn-sphotos-d-a.akamaihd.net/hphotos-ak-prn1/19911_10151420930421784_153374 4516_n.jpg


I am happy with the outcome for now... need new housings to do another retrofit and sells these...


Car is still for sale tho!

Also gave the winter beater / daily driver a bath...


https://sphotos-a.xx.fbcdn.net/hphotos-prn2/8450_10151420936381784_1990388 184_n.jpg

[Roadwarrior]

A few days late to post, but drove my Marauder 470+ miles roundtrip this past Sunday to go to the beach in S.E. North Carolina w/ my girlfriend & washed it the next day. Enjoyed the drive, just passed 103k on the odometer & noticed quite a few stares towards the car. :dunno:

[slickster]

On this great day my mm was born. Going to give it a bath and take it for a drive. Waiting on a carport

[L.Mark]

A few days late to post, but drove my Marauder 470+ miles roundtrip this past Sunday to go to the beach in S.E. North Carolina w/ my girlfriend & washed it the next day. Enjoyed the drive, just passed 103k on the odometer & noticed quite a few stares towards the car. :dunno:

Must of had a bug in your grill...:D:D:D

[Black Dynamite]

Clicked over 82k. :bigcry:

[ctrlraven]

Installed the new tune for my Taurus, no more throttle lag again!

[loud2004marquis]

Where is the tune from?

[ctrlraven]

Where is the tune from?
Mike @ 5 Star Tuning. http://www.5startuning.com/

[Black Dynamite]

I turned over 82k. :depress:

[WPG_Merc]

I have New Comp Stage 3 Cams w New Timing Set to install next week
:banana2:

[Pat]

Maybe this should be considered in the possessed category. In the past few weeks my A/F gage stopped working and the P/S rear window was stuck in the open position. Two days ago the A/F gage started working and today the rear window started working. No input from me.

Full moon tonight.

[ctrlraven]

Maybe this should be considered in the possessed category. In the past few weeks my A/F gage stopped working and the P/S rear window was stuck in the open position. Two days ago the A/F gage started working and today the rear window started working. No input from me.

Full moon tonight.

The Super Moon will be around on Sunday. :lol:

[Dobs]

Got my new floormats in and gave them an accent light ;)
http://i43.photobucket.com/albums/e397/maynard1992/IMG_20130326_183509_388_zps53a 23aec.jpg

Where did you got them?

[teamrope]

Oil change. :P

[Richy04]

Today I watched green fluid drip out of my a/c accumulator which rusted out.. I did notice that even a Mercury Marauders Pag 46 Oil is faster looking than most other companies oils and that brought a smile to my face making an otherwise bad day just fine and dandy..

[NavySeabee]

Swapped out bad BCM. Little of a PITA that was. 1.5 hours, 3 beers, and 2 sc***** knuckles. Job well done. Thanks FBM for the refurbished one!

[NavySeabee]

Swapped out bad BCM. Little of a PITA that was. 1.5 hours, 3 beers, and 2 sc***** knuckles. Job well done. Thanks FBM for the refurbished one!

sc***** = scr_aped

[IwantmyMMnow!]

Didn't do anything to my car (other than put gas in it), but was such a great day that involved my car, so had to post up.

Took the kids to lunch at Cook-Out; after I placed my order (went inside as it was a bit too warm to sit out), the little cutie behind the register asked if I was the one with the silver car. I said yes, and she asked some more questions and I gave her the 411 about our MMs...walked outta there with her phone number. :coolman:

Went through downtown on the way to/from Cook-out; lots of people out and had more than a handful of stares and a few compliments...I obliged with a little throttle to let my exhaust speak a few words. :cool4:

Got home and checked my mail; my instrument cluster (thanks Trevor!), my blue LEDs that I ordered, and my rent money from my PM were all there waiting for me.

Was a good day, indeed.

http://www.youtube.com/watch?v=ViK8PwbJmxo

Think I'm gonna take the kids out for another stroll when it starts to cool off/get dark....

[Curless]

Can you say Nitto 305-45-18 555R's and widened wheels???? I can! :banana2: Now I NEED BOOST to turn them!!!!!!!!!:eek::lol:

[jerrym3]

Started the cleaning process on my 64 Galaxie convert.

I'm driving the Parade Marshall in a local July 4th parade.

Just completed a light finishing compound/wax detail on the hood and trunk.

(A 1980 repaint job is a 1980 year repaint job. Tough to beat father time.)

[MyBlackBeasts]

Now I NEED BOOST to turn them!!!!!!!!!:eek:

Hahaha! Told you so!!! :D Boost, Boost, Boost!!! :burnout:

[RoyLPita]

Time to start doing more work to my MM and remove some of my mods.

[Roadwarrior]

A few days late to post, but drove my Marauder 470+ miles roundtrip this past Sunday to go to the beach in S.E. North Carolina w/ my girlfriend & washed it the next day. Enjoyed the drive, just passed 103k on the odometer & noticed quite a few stares towards the car. :dunno:


Must of had a bug in your grill...:D:D:D

My MM does have bug damage from the previous owner that am getting estimates to fix as well as the slightly damaged rear bumper cover to repair & repaint. Hope to get it taken care of before Marauderville XI. :beer:

[Curless]

Hahaha! Told you so!!! :D Boost, Boost, Boost!!! :burnout:


Yeah, you guys all did...I was sure I would not get the bug only one year ago but once I had gears and a tune the burn outs began...now that I have 555r's and widened wheel they have stopped again....we can't have that!!!!!!

[Mr. Man]

Time to start doing more work to my MM and remove some of my mods.
:eek: Huh? I must have missed something. Did you have an accident Brian? :dunno:

[MyBlackBeasts]

Yeah, you guys all did...I was sure I would not get the bug only one year ago but once I had gears and a tune the burn outs began...now that I have 555r's and widened wheel they have stopped again....we can't have that!!!!!!


Yep! :D :D :D :D :D

SW headers & exhaust is my project before MVXI! :burnout:

[Curless]

Yep! :D :D :D :D :D

SW headers & exhaust is my project before MVXI! :burnout:


Nice! Big $$$ unfortunately though...but they are sweet!:beer:

[RoyLPita]

:eek: Huh? I must have missed something. Did you have an accident Brian? :dunno:

No accident. I am looking into getting something else and selling the mods that I will be removing.

[lji372]

Yaaaaawn......

34869

Watched curless try and do a burnout yesterday :shake:
He had a long disappointing ride home.......

34870
But today he was happy to get this old junker out of his bay :lol: j/k

Thank you mm.net for good times and great memories with new friends.

Where's doom :dunno:

[Curless]

Yeah, these 305's are STICKY!!!!!!!! I now truly NEED BOOST!!!!!

[tbone]

Adjusted my SW exhaust for the xxth time after the trans was pulled last. Lubed my Metco control arms and u joints. Splashed some rust dissolver around the frame and other bits. Wiped down the control arms, shocks and axle girdle.

Said thanks to the lady sitting in her car accross the street that yelled over to me what a nice car I have. :)

[Zim Hosein]

Splashed some rust dissolver around the frame and other bits. Wiped down the control arms, shocks and axle girdle.

What brand "rust dissolver" did you use tbone if you don't mind me asking? In addition, a UPC would be appreciated to be honest! :o I've been looking at "rust converter" compounds for quite some time for some non-automotive work, but "reliable" info is difficult to come across! :(

Thanks in advance tbone! :beer:

[JBFTech]

Gave her a good wash, and we put about 137 miles on her out cruising around the lake and back roads. Good times!


Sent from B.F.E. by aliens

[ctrlraven]

Had to pull the front bumper off the Taurus to replace the passenger HID headlight and ballast.

Also replaced the passenger side blend door motor for the climate control system.

[tbone]

What brand "rust dissolver" did you use tbone if you don't mind me asking? In addition, a UPC would be appreciated to be honest! :o I've been looking at "rust converter" compounds for quite some time for some non-automotive work, but "reliable" info is difficult to come across! :(

Thanks in advance tbone! :beer:

http://c.shld.net/rpx/i/s/pi/mp/3125/1585927213?src=http%3A%2F%2Fme dia.lifeandhome.com%2Fmedia%2F catalog%2Fproduct%2F8%2F6%2F86 465_030911i_sr.jpg&d=38ff7e3a44320f80e7f68ac7ec85 aaa18707458a

http://www.permatex.com/products/product-categories/specialized-maintenance-repair/body-interior-trim/permatex-rust-treatment-detail

Use it on your brake calipers and no need to paint black, which will eventually rust through again and or peel. You'll thank me......

[8UWITH6]

Yaaaaawn......

34869

Watched curless try and do a burnout yesterday :shake:
He had a long disappointing ride home.......



Hey Chris, need me to chop those front springs for you!?!?!?! 4x4 FX4 Marauder! :beer:

[lji372]

Hey Chris, need me to chop those front springs for you!?!?!?! 4x4 FX4 Marauder! :beer:

It was awesome, epic fail! He was sooooo pissed. I told him to strip the black off and embrace the dtr paint underneath :laugh:

[L.Mark]

Sure it was cause of the 555R's or as a result of Graeter's???

[jerrym3]

Started the cleaning process on my 64 Galaxie convert.

I'm driving the Parade Marshall in a local July 4th parade.

Just completed a light finishing compound/wax detail on the hood and trunk.

(A 1980 repaint job is a 1980 year repaint job. Tough to beat father time.)

Got an email request last evening from a town with a MUCH bigger and better parade asking me to drive their Grand Marshall.

Thought about it:

1) I have no written agreement or even a handshake with the first town
2) all we have is an email agreement

But, when you make a commitment, you stand by it.

[Invader]

Just snagged this up on eBay. Mann, all the good **** goes fast. Lmao! :coolman:http://img.tapatalk.com/d/13/06/26/emy3ydu7.jpg

[Windsor58]

http://c.shld.net/rpx/i/s/pi/mp/3125/1585927213?src=http%3A%2F%2Fme dia.lifeandhome.com%2Fmedia%2F catalog%2Fproduct%2F8%2F6%2F86 465_030911i_sr.jpg&d=38ff7e3a44320f80e7f68ac7ec85 aaa18707458a

http://www.permatex.com/products/product-categories/specialized-maintenance-repair/body-interior-trim/permatex-rust-treatment-detail

Use it on your brake calipers and no need to paint black, which will eventually rust through again and or peel. You'll thank me......
The site says its good up to 200 degrees. I thought calipers would get hotter than that. Does it still work? I've been needing to do something with my calipers...

[Invader]

The site says its good up to 200 degrees. I thought calipers would get hotter than that. Does it still work? I've been needing to do something with my calipers...

FWIW This is what I used on my car. It worked great!http://img.tapatalk.com/d/13/06/26/6anysepu.jpg Almost 2 years no problem. It's called Por15 and this is a pic of the kit. You can get it on eBay. For about $50.00 or so. They have a few different colors. Black, Red, Silver.

[Mr. Man]

FWIW This is what I used on my car. It worked great!http://img.tapatalk.com/d/13/06/26/6anysepu.jpg Almost 2 years no problem. It's called Por15 and this is a pic of the kit. You can get it on eBay. For about $50.00 or so. They have a few different colors. Black, Red, Silver.
I think the G2 paint is cheaper and 200* is way to low for caliper paint. I think the G2 is good for like 900* check out their web site

http://www.g2usa.com/

[mossiehorn]

Brakes pads and rear rotors, first brake work in 100,000ks (about 60,000 miles) They were not completely gone

[tbone]

The site says its good up to 200 degrees. I thought calipers would get hotter than that. Does it still work? I've been needing to do something with my calipers...


First I tried BBQ paint on my calipers and the winter salt caused the rust to come right through. Put the rust treatment on and it turned them nice and black. Have not had an issue in 4 months with heat or anything.

[LeoVampire]

First I tried BBQ paint on my calipers and the winter salt caused the rust to come right through. Put the rust treatment on and it turned them nice and black. Have not had an issue in 4 months with heat or anything.

Before I painted my calipers I bought brand new ones.

The base coat I used was Header paint primer that promotes bonding to the metal plus it can withstand extreme heat. This can withstand 2,000 degrees.

Then I did my paint color I wanted VHT caliper paint can withstand 900 degrees. Same with the top clear coat 900 degrees.

I think I am on year 3 now with this paint work and it still looks like the day I did it.

[ctrlraven]

Before I painted my calipers I bought brand new ones.

The base coat I used was Header paint primer that promotes bonding to the metal plus it can withstand extreme heat. This can withstand 2,000 degrees.

Then I did my paint color I wanted VHT caliper paint can withstand 900 degrees. Same with the top clear coat 900 degrees.

I think I am on year 3 now with this paint work and it still looks like the day I did it.
I bought VHT's brake primer, paint and clear. Haven't done mine yet cause I will probably getting Wilwoods but I'll need to paint the rears at least.

[fastblackmerc]

Before I painted my calipers I bought brand new ones.

The base coat I used was Header paint primer that promotes bonding to the metal plus it can withstand extreme heat. This can withstand 2,000 degrees.

Then I did my paint color I wanted VHT caliper paint can withstand 900 degrees. Same with the top clear coat 900 degrees.

I think I am on year 3 now with this paint work and it still looks like the day I did it.


I bought VHT's brake primer, paint and clear. Haven't done mine yet cause I will probably getting Wilwoods but I'll need to paint the rears at least.

I already have red powered coated Wilwoods up front.

Obtained a set of rear calipers that I'm in the process of cleaning up and smoothing the surface, then it's off to get power coated.

Will swap them out the same time I do the 31 spline axles, TCE SS brake lines, rear shocks and slotted rotors.

[fastblackmerc]

Upgraded my backup camera.

Will be offering mine old one up for sale shortly.

[Invader]

Before I painted my calipers I bought brand new ones.

They were the Police Package ones I hope!

[MarauderMike]

New Borla mufflers and custom H-pipe. :D

[WhatsUpDOHC]

New Borla mufflers and custom H-pipe. :D
Allright Mike!! Feeling better? :beer::beer::beer::beer::beer:

[fastblackmerc]

They were the Police Package ones I hope!

What are "Police Package" calipers?

[Invader]

What are "Police Package" calipers?

They are the calipers that they use on the Police Package P71. They have high temp silicon boots on them. That's what I put back on after I did the big bit rotor and SS brake line upgrade.

[Mr. Man]

New Borla mufflers and custom H-pipe. :D
Any chance for a good sound clip? :)

[Shaijack]

Drove Blue and Red. Police Package Calipers come with Police Chips..

[Invader]

Drove Blue and Red. Police Package Calipers come with Police Chips..

Well they work fine on my Marauder!

[LeoVampire]

Well they work fine on my Marauder!

I got them from Raybestos with their high tech performance brake pads and the drilled and slotted rotors.

The pads have never made a single sound and have never left any dust behind either.

Plus I also have the braided lines on as well from TC.

Took off the master and adjusted the push rod till it sat just against the piston so I get instant response from touching the brake pedal.

I have no complaints about the brakes or the paint work I did on them to date.

I do not drive her much but I still change the brake fluid out every other year to keep it clean and clear.

[Invader]

I got them from Raybestos with their high tech performance brake pads and the drilled and slotted rotors.

The pads have never made a single sound and have never left any dust behind either.

Plus I also have the braided lines on as well from TC.

Took off the master and adjusted the push rod till it sat just against the piston so I get instant response from touching the brake pedal.

I have no complaints about the brakes or the paint work I did on them to date.

I do not drive her much but I still change the brake fluid out every other year to keep it clean and clear.

That's the exact setup I did... :beer: :beer: :beer:

[8UWITH6]

Got my DBP trunk spoiler installed! :)

[tbone]

[QUOTE=LeoVampire;1309429]

Took off the master and adjusted the push rod till it sat just against the piston so I get instant response from touching the brake pedal.

QUOTE]


I did the same thing until I discovered that brake fluid gets hot and expands, then it locks up the brakes so the car hardly moves. I would recommend you back it off a little. I had to adjust it a couple times to get it just right.

[jerrym3]

Drained the oil, dropped the oil pan, and changed the gasket on my wife's Lincoln LS.

Tomorrow, a friend/mechanic is coming over to work on my Galaxie's p/s leak and to see if I really need a new serpentine belt on the LS. (I think I do.) We'll torque the oil pan bolts at that time.

Also, on the Galaxie, changed the weather stripping on the rear quarter windows, repaced the front parking light lenses with amber lenses (a real PITA; the old amber bulbs would not come out), replaced the dashboard "LIGHTER" and "AIR" bezels, and just learned that the Galaxie replacement instrument cluster bezel is no longer being manufactured.

Bummer.

To do:

Pull the Galaxie instrument cluster, repaint it, and replace the "TEMP" and "FUEL" clear plastic lenses.

That should be fun. Can't wait to squirm under the dash to pull the speedo cable and the various bulbs/connections.

[Mr. Man]

Jumped the dead battery. Parasitic drain on these cars is heavier than other cars I've owned. Damn clock draws a lot of juice. :lol:

[LeoVampire]

[QUOTE=LeoVampire;1309429]

Took off the master and adjusted the push rod till it sat just against the piston so I get instant response from touching the brake pedal.

QUOTE]


I did the same thing until I discovered that brake fluid gets hot and expands, then it locks up the brakes so the car hardly moves. I would recommend you back it off a little. I had to adjust it a couple times to get it just right.

I changed out the system Fluid to High temp Synthetic Brake fluid for starters to handle issues with boiling fluid and increased pressure.

But I did make sure there is no resistance between the master piston plunger and the push-rod from the brake booster when I made the adjustments originally.

But your right it is a good idea to remind people that care needs to be taken when doing this. :D

[Comin' in Hot]

I finally got the correct fittings for my trans cooler and got that back together on my blue mm, today im going to drop the fuel tank on my black mm to change the evap hose the runs above it.... I am dreading doing this.

[Murked#2866]

Moved back to Seattle for a year to work 3 jobs and get some money saved up since California has such horrible unemployment and crappy pay... :(
No car for a bit while I am here so I have been looking for a 2006 Crown Vic LX Sport to pass time and get to work while Im away from the Marauder

[lji372]

Got my DBP trunk spoiler installed! :)

Pics :dunno:

[tbone]

[QUOTE=tbone;1309440]

I changed out the system Fluid to High temp Synthetic Brake fluid for starters to handle issues with boiling fluid and increased pressure.

But I did make sure there is no resistance between the master piston plunger and the push-rod from the brake booster when I made the adjustments originally.

But your right it is a good idea to remind people that care needs to be taken when doing this. :D


Go out and get the brakes nice and hot and see if they start to lock up. Have tools with you just in case.

[Shaijack]

Sprayed them with brake fluid and set them in the sun to dry. Kept the birds off.

[8UWITH6]

Pics :dunno:

https://sphotos-a.xx.fbcdn.net/hphotos-ash4/1002828_10201375313525319_1984 044491_n.jpg

There you go Jerry........... :)

[lji372]

https://sphotos-a.xx.fbcdn.net/hphotos-ash4/1002828_10201375313525319_1984 044491_n.jpg

There you go Jerry........... :)

Thx....still lovin your blue man:beer:

Oh and myself, Monroe severe duties on back of black. Cut off the top part to accept the wide wheel
Next week I'll swap wheels and get the 305's on the back.

[8UWITH6]

You get a little cranky when your hungry, here have a snickers......

Thx, love it too! Need boost find me a junkyard trilogy!:lol:

[lji372]

You have to admit it took a little balls to do that.

Here you go bro! Go get it!!!

http://www.copart.com/c2/homeSearch.html?_eventId=getLo t&execution=e1s1&lotId=18101213&returnPage=SEARCH_RESULTS

[ncmm]

ends Monday. . .

[8UWITH6]

You have to admit it took a little balls to do that.

Here you go bro! Go get it!!!

http://www.copart.com/c2/homeSearch.html?_eventId=getLo t&execution=e1s1&lotId=18101213&returnPage=SEARCH_RESULTS

:) Not a bad price right now....

[Mebot]

Went over to Gordon's Garage today with my dad and we installed drilled & slotted rotors, new ceramic pads, ss brake lines and put my old blue calipers back on from my old Marauder.

Unfortunately when taking the rear drivers side rotor off looks like my emergency brake shoe was warped/melted onto the inside. After banging the rotor off with a sledgehammer, bits and pieces off the bottom shoe fell out. I'm going to have to start a thread in the brake forum. Anyone ever replace the shoes before? Are they Marauder specific or is it similar to a grand maq or crown Vic?

Anyways I won't be using my e brake until I replace the shoes. In the meantime, the new brakes are doing great!

sent from a Samsung Galaxy far far away...