What did you do to your car today?

[lji372]

Only the Saturn ion but I was bored and it needed it bad.

Is it April yet?


4521145212


Sent from my iPhone using Tapatalk

[MyBlackBeasts]

Day time.
https://uploads.tapatalk-cdn.com/20170122/b0c1ee820eeeb1343262f631b7bf2f 02.jpg
Sent from my iThrone using Tapatalk

Nice! Thanks for sharing. I was thinking on putting one under the visor on my p/u.

[MGDriver]

Weather was nice on Sunday so I took my Marauder out of storage and met up with a friend. His car is a daily driver and he put CVPI steel wheels on it for the winter, is there anybody else who here who does that? I've been considering to do it myself as mine will become a daily very soon (have to sell my Audi, can't afford having 3 cars any longer but that's a story for another time)

These represent 20% of the German Marauder population and are the only 2 in my state which has the same population as Florida but in the size of Maryland.

[rayjay]

Weather was nice on Sunday so I took my Marauder out of storage and met up with a friend. His car is a daily driver and he put CVPI steel wheels on it for the winter, is there anybody else who here who does that? I've been considering to do it myself as mine will become a daily very soon (have to sell my Audi, can't afford having 3 cars any longer but that's a story for another time)

These represent 20% of the German Marauder population and are the only 2 in my state which has the same population as Florida but in the size of Maryland.

Quite a few of us here in the states did that. I drove mine year round in the central New York State snowbelt for the 1st four years of its life. There is a thread on here about what size tires to use so the computer operates correctly. These cars are pretty good in snow with dedicated snow tires. Due to our extreme weather I used studded tires.

[Shaijack]

Just turned 350 miles on Blues new engine.

[tbone]

Ordered up a new wiper cowl. Sick of dried up old plastic/rubber and the crap at the boneyard. Rather expensive, but worth it.

Next I think I will order new carpet and line the floor with dynamat type stuff they use for HVAC work available for cheap at the local Home Depot.

[larryo340]

Weather was nice on Sunday so I took my Marauder out of storage and met up with a friend. His car is a daily driver and he put CVPI steel wheels on it for the winter, is there anybody else who here who does that? I've been considering to do it myself as mine will become a daily very soon (have to sell my Audi, can't afford having 3 cars any longer but that's a story for another time)

These represent 20% of the German Marauder population and are the only 2 in my state which has the same population as Florida but in the size of Maryland.
Now since my Marauder is a daily driver I use snows on steelies for the winter. With Yokohama Ice Guard's the car is great in the snow. I run front size 225/60/16, and rears 235/65/16 even though I don't have traction control I like to keep the stance that the car has. I use Mercury Mountainer center caps... to me they look more natural with the Mercury emblem.

http://i299.photobucket.com/albums/mm288/larryo340/My%20Marauder/2e2a096fe919a296689ac295ab9fae 8d_zpsttxumpmv.jpg

[Zim Hosein]

I use Mercury Mountainer center caps... to me they look more natural with the Mercury emblem.

http://i299.photobucket.com/albums/mm288/larryo340/My%20Marauder/2e2a096fe919a296689ac295ab9fae 8d_zpsttxumpmv.jpg

While my Marauder has never seen snow/salt here in the NE, I must say that your steelies look good w/ the Mountainer center caps larryo340! :beer:

[03Merc]

https://uploads.tapatalk-cdn.com/20170203/ada630fc580c38783c8787e75dbacf 57.jpg

Put factory tips back on. These are non resonated tho. Thanks JustBob for offering them to Me.


Sent from my iPhone using Tapatalk Pro

[justbob]

https://uploads.tapatalk-cdn.com/20170203/ada630fc580c38783c8787e75dbacf 57.jpg

Put factory tips back on. These are non resonated tho. Thanks JustBob for offering them to Me.


Sent from my iPhone using Tapatalk Pro



[emoji1303]


Sent from my iPhone using Tapatalk

[MGDriver]

Quite a few of us here in the states did that. I drove mine year round in the central New York State snowbelt for the 1st four years of its life. There is a thread on here about what size tires to use so the computer operates correctly. These cars are pretty good in snow with dedicated snow tires. Due to our extreme weather I used studded tires.
Now since my Marauder is a daily driver I use snows on steelies for the winter. With Yokohama Ice Guard's the car is great in the snow. I run front size 225/60/16, and rears 235/65/16 even though I don't have traction control I like to keep the stance that the car has. I use Mercury Mountainer center caps... to me they look more natural with the Mercury emblem.

Thanks for your thoughts. Problem is that I still have a perfecltly good set of winter tyres for the stock wheels from the previous owner, I've never used them so they are almost brand new. Do you know if anyone makes 18'' steelies that I could use them on? Been looking around and couldn't find anything, largest size for steelies seems to be 17''

[RubberCtyRauder]

Thanks for your thoughts. Problem is that I still have a perfecltly good set of winter tyres for the stock wheels from the previous owner, I've never used them so they are almost brand new. Do you know if anyone makes 18'' steelies that I could use them on? Been looking around and couldn't find anything, largest size for steelies seems to be 17''


A crownvic.net member bought these
(currently sold out it says)
http://www.1010tires.com/Wheels/Winter%20Rims/Universal%20Fit%20Steel/18Multi

read about it here
http://www.crownvic.net/ubbthreads/ubbthreads.php?ubb=showflat&Number=3387825#Post3387825

[MGDriver]

A crownvic.net member bought these
(currently sold out it says)
http://www.1010tires.com/Wheels/Winter%20Rims/Universal%20Fit%20Steel/18Multi

read about it here
http://www.crownvic.net/ubbthreads/ubbthreads.php?ubb=showflat&Number=3387825#Post3387825

Those look amazing, shame they are sold out. That's exactly what I'm after.

[Ocarr89]

Cleaned My babies up.

https://uploads.tapatalk-cdn.com/20170205/e30649a64cca4b844993bd25571dc4 01.jpg

Sent from my SM-G920T using Tapatalk

[RubberCtyRauder]

Those look amazing, shame they are sold out. That's exactly what I'm after.

I'm sure they will have more at some point, might have to wait until later this year when they gear up for this year's winter start. so just keep checking their site once in a while.

[lji372]

Just picked up a part.....

45270


Sent from my iPhone using Tapatalk

[RubberCtyRauder]

Just picked up a part.....

45270


Sent from my iPhone using Tapatalk

First one or tenth..:D

[MOTOWN]

First one or tenth..:D

Hell! more like 10K!!!!!!!!!!

[Turbov6Bryan]

Just picked up a part.....

45270


Sent from my iPhone using Tapatalk

Haha Did you get a better deal than the one I picked up this week?

[lji372]

Haha Did you get a better deal than the one I picked up this week?

No sir :bows:

[MGDriver]

I'm sure they will have more at some point, might have to wait until later this year when they gear up for this year's winter start. so just keep checking their site once in a while.
Let's hope so, definitly have that link bookmarked. Thanks for your help!



Cleaned My babies up.
I like the fact that I'm not the only one who owns that combination of brands, though yours are a lot nicer!

http://www.supermotors.net/getfile/1052372/fullsize/dscn1761.jpg

[Curless]

Dug it out of storage, drove it into to work, changing the oil, topping off the tires, general check over... I'm going to Florida tomorrow and I'm driving mine!

[justbob]

Still up on the lift under an inch of dust and a bunch of IDGAF's.

I hand washed the other three though. [emoji16]


Sent from my iPhone using Tapatalk

[guspech750]

Took the cover off it, hooked up battery. Drove to store, farted in it and parked it.


Sent from The White House on taxpayers dimes.

[L.Mark]

Dug it out of storage, drove it into to work, changing the oil, topping off the tires, general check over... I'm going to Florida tomorrow and I'm driving mine!

Going to Disney World huh to ride the Tee Cups???

[Curless]

Going to Disney World huh to ride the Tee Cups???


LOL, sort of!!!!!!!

[03Merc]

Installed new tires all around, car rides much better. Front Suspension is next on the list.


Sent from my iPhone using Tapatalk

[2mercs]

Haven't seen it since putting it away in November. The wife checked on it today and sat in it making vroom noises.

Sent from my SM-G930V using Tapatalk

[lji372]

Haven't seen it since putting it away in November. The wife checked on it today and sat in it making vroom noises.

Sent from my SM-G930V using Tapatalk

She was in the back seat when it did it right?

[2mercs]

She was in the back seat when it did it right?
She makes different sounds from the back seat. [emoji6]

Sent from my SM-G930V using Tapatalk

[MOTOWN]

Bought an ARP Watts link stud from Chris at ADTR after disassembling the 8.8 on Silver realizing the factory stud was bent 180*

[miamisilvermm]

Washed and waxed. The original paint still looks great.

[Turbo4v06]

finally got my mags and 4" tips installed

[Turbo4v06]

finally got my mags and 4" tips installed

now she can breath

[Mackdombles]

now she can breath
What the p/n on those magnaflows? Ive got a set but they look smaller. Im getting ready to install longtubes an x pipe and im thinking the one i have will be too loud.

[tbone]

New wiper cowl arrived. So that's what these are supposed to look like....

[Turbo4v06]

What the p/n on those magnaflows? Ive got a set but they look smaller. Im getting ready to install longtubes an x pipe and im thinking the one i have will be too loud.


12256

5x8 oval
18" body
24" overall
2.5 in and out

very pleased with the sound

[03Merc]

12256



5x8 oval

18" body

24" overall

2.5 in and out



very pleased with the sound



Mines LOUDER! (:


Sent from my iPhone using Tapatalk Pro

[tbone]

12256

5x8 oval
18" body
24" overall
2.5 in and out

very pleased with the sound

+1^^^^^^^^^^^

[Turbo4v06]

Mines LOUDER! (:


Sent from my iPhone using Tapatalk Pro
Lol You're right, its loud and obnoxious but it sounds good.

Sent from my LG-LS997 using Tapatalk

[MOTOWN]

Got my Metco lower pulley ring from Metco , shipped it in two days! Thank you!

[mm svt]

Started the tranny projecthttps://uploads.tapatalk-cdn.com/20170210/e4d93847457233137d35257f7751d7 e4.jpg

[mm svt]

Better late than never

[mm svt]

Clean out the engine bayhttps://uploads.tapatalk-cdn.com/20170210/714f7c9b96ce6fe8f05740de0597c8 27.jpg

[mm svt]

Wondering what to do about the crappy firewall insulation

[Mackdombles]

Started the tranny projecthttps://uploads.tapatalk-cdn.com/20170210/e4d93847457233137d35257f7751d7 e4.jpg

Wow I actually thought you stole my picture! I just got done with the Mach 1 pedal swap and took nearly the exact same pic! Looks great!

[justbob]

Wondering what to do about the crappy firewall insulation



I removed it altogether, painted the firewall and the entire undercarriage with bed coating, and sound deadened the interior. Way cleaner.

https://uploads.tapatalk-cdn.com/20170210/03dc4c71e08aa36df25fa5a11710e0 65.jpg


Sent from my iPhone using Tapatalk

[Comin' in Hot]

I moved my trilogy about 20 feet, cleaned the snow off it, and reparked it. Then stared at my whipple swap project DBP and walked away. I'm way more interested in my awd Astro vans right now lol.

[mm svt]

I removed it altogether, painted the firewall and the entire undercarriage with bed coating, and sound deadened the interior. Way cleaner.

https://uploads.tapatalk-cdn.com/20170210/03dc4c71e08aa36df25fa5a11710e0 65.jpg


Sent from my iPhone using Tapatalk



That looks nice Bob, you ditched the cutouts

[mm svt]

Also like the hidden drive shaft

[justbob]

That looks nice Bob, you ditched the cutouts



Thanks. Yeah, I couldn't wait to get rid of the cut outs.

The new DSS shaft was being made when this pic was taken.

Here it is [emoji4]
https://uploads.tapatalk-cdn.com/20170210/c025b3e913649d7f9253484bf3d7b0 fd.jpg
https://uploads.tapatalk-cdn.com/20170210/f24599887eb25f7e3253273e77a992 06.jpg


Sent from my iPhone using Tapatalk

[Roadwarrior]

Had the front sway bar links & complete upper control arms replaced on the Marauder. Also had the front end aligned to Carfixer's specs afterwards.

[al831]

its going to be nice today, might take Mo (thats my marauders name) out for a little. im thinking about having Mo painted, the body is in good shape, the front has stone chips, some nicks and scratches around the car,.does anyone have an idea what a paint job would cost? the car looks great from a few feet away but up close the nicks are noticeable. are there different levels of paint jobs, maybe im rambling but just wondering

[RubberCtyRauder]

its going to be nice today, might take Mo (thats my marauders name) out for a little. im thinking about having Mo painted, the body is in good shape, the front has stone chips, some nicks and scratches around the car,.does anyone have an idea what a paint job would cost? the car looks great from a few feet away but up close the nicks are noticeable. are there different levels of paint jobs, maybe im rambling but just wondering

A nice paint job with proper prep, tear down, base coat, clear coat, will be $6-8k at least.

[Turbov6Bryan]

its going to be nice today, might take Mo (thats my marauders name) out for a little. im thinking about having Mo painted, the body is in good shape, the front has stone chips, some nicks and scratches around the car,.does anyone have an idea what a paint job would cost? the car looks great from a few feet away but up close the nicks are noticeable. are there different levels of paint jobs, maybe im rambling but just wondering

Stop using white wax and go with a color tinted wax

If the paint isn't cracked, possibly cut, buff, dewax, fill in the bigger pits and color wax.

What color is your car?
Pictures of area?

[fastblackmerc]

its going to be nice today, might take Mo (thats my marauders name) out for a little. im thinking about having Mo painted, the body is in good shape, the front has stone chips, some nicks and scratches around the car,.does anyone have an idea what a paint job would cost? the car looks great from a few feet away but up close the nicks are noticeable. are there different levels of paint jobs, maybe im rambling but just wondering

The cost of a repaint will depend on level of prep required, body work required, cost of materials and cost of labor.

[03Merc]

Dropped the trans pan, cleaned the magnet and replaced the filter and gasket. Put about 4.5qts back in it.


Sent from my iPhone using Tapatalk Pro

[Mackdombles]

Ordered the inline thermostat housing and a second set of ict billet crossover tube replacement ports. Plumbing the engine coolant system as effective as possible both in terms of operation , as well as being able to afford this. If you need a cot delete kit ebay seller ict billet. I'm doing them both in front as well as rear top of heads. Got the triax shifter and oem Ford shifter handle. Clutch Pedals have been hung and cable adjuster as well as cable have been installed. Cleaned and painted some engine parts.

[RubberCtyRauder]

Ordered the inline thermostat housing and a second set of ict billet crossover tube replacement ports. Plumbing the engine coolant system as effective as possible both in terms of operation , as well as being able to afford this. If you need a cot delete kit ebay seller ict billet. I'm doing them both in front as well as rear top of heads. Got the triax shifter and oem Ford shifter handle. Clutch Pedals have been hung and cable adjuster as well as cable have been installed. Cleaned and painted some engine parts.

Is this what you bought?

http://www.ictbillet.com/ford-mod-4-6l-4v-billet-front-cylinder-head-coolant-crossover-port-mustang-99-04-c.html

[Mackdombles]

Yes it is. 2 sets.

[daddyusmaximus]

Got new tires yesterday. Went with Michelin Pilot Sport A/S 3+. Very happy with the feel of the car. The level of comfort stayed the same, but it feels quite a bit more stable. The ass is planted better and there isn't as much push. I didn't get to really push them to the limit yet, but did enough to know I'm gonna like these tires a lot. The grip is good enough that I can't do as good of a burnout now... Not that I want to very often with what a set of good tires cost these days.

[Shinker]

Fired it up for the first time since I bought it a few months back and it has the dreaded ticking sound coming from front of passenger head I've read so much about. Dissappointed that's for sure but kinda figured there must be something seriously wrong to get it for $1500

[cer0413]

Installed new gauge pod and cleaned the "bay area" for the car meet
https://uploads.tapatalk-cdn.com/20170219/c9233b78244bee21e5d4f0e871a02c 62.jpg

https://uploads.tapatalk-cdn.com/20170219/1b898672892aa5c77570c987041e86 b6.jpg
Sent from my SM-G930P using Tapatalk

[camelgrundle]

Looking good man^

[03Merc]

https://uploads.tapatalk-cdn.com/20170219/de10eefc4c37ecf2728fe45e602fd4 d6.jpg

Changed some suspension components on My car. Installed the SS Brake-line kit on My buddy's car.


Sent from my iPhone using Tapatalk Pro

[Turbov6Bryan]

Made some freeeeeeedom runs in new SB. Decided it's way to loud and needs quieter mufflers. I must be too damn old cause it's too loud

[SteelQualityMan]

You have a good taste in tires sir. I bought the exact same Michelin Pilot Sport A/S 3+ a few days ago. I haven't had a chance to push them very hard yet because of the wet and snowy weather here in New Jersey, but I'm looking forward to it when things dry out.

Sent from my SM-G935T using Tapatalk

[sparker_1982]

Got the big 3 upgrade extra battery and some new shoes for the Merc

[Turbo4v06]

Got some tints,new radiator & 170degree stat, white headlight and fog bulbs.

[tbone]

Ordered up new extra plush Essex carpeting.

[justbob]

Actually started it and took it to dinner. First time it's felt concrete or been cranked since I believe September???


Sent from my iPhone using Tapatalk

[MOTOWN]

Made some freeeeeeedom runs in new SB. Decided it's way to loud and needs quieter mufflers. I must be too damn old cause it's too loud

Ill bet it runs great now!:banana:

[MOTOWN]

https://uploads.tapatalk-cdn.com/20170219/de10eefc4c37ecf2728fe45e602fd4 d6.jpg

Changed some suspension components on My car. Installed the SS Brake-line kit on My buddy's car.


Sent from my iPhone using Tapatalk Pro

I need your garage!:D

[Gerry24]

Changed her oil and took her on the turnpike for a bit.

[Turbov6Bryan]

Ill bet it runs great now!:banana:

You know that's right :)

[fastblackmerc]

Replaced 16 spark plugs in the wife's '07 Charger R/T.

[Bluerauder]

Cleaned up, gassed up, and took her out for some exercise around town in some nice mild February weather. Spring can't be far behind.

[primuspilum]

Stainless bumper letter inserts for my 2004.


http://i802.photobucket.com/albums/yy309/toecutter_01/IMG_3178_zpspnrsekun.jpg



Cleaned up a brand new fuel leak from my 2003. :eek:

http://i802.photobucket.com/albums/yy309/toecutter_01/16832050_10208523069737779_319 0891700645008110_n_zpsz76mnetv .jpg

[tbone]

I love my SS inserts. One of the best cosmetic mods there is.

[Gerry24]

Took my little girl to the vet to get her check up.

[mm svt]

Tore the tranny down to do a internal inspection and part upgrade

https://uploads.tapatalk-cdn.com/20170305/b0b9923b58a4697ca97b5a19fd7867 66.jpg

[fastblackmerc]

Changed the rear end lube in the wife's 2007 Charger.

[TJCOX]

Ordered a pair stabilizer links for the front.

[TJCOX]

Tore the tranny down to do a internal inspection and part upgrade

https://uploads.tapatalk-cdn.com/20170305/b0b9923b58a4697ca97b5a19fd7867 66.jpg

Is there a kit available for this? Any Special tools?
Thanks!

[crouse]

Changed spark plugs. Went with Motorcraft. Two on the right (passenger) side were slightly loose. Torqued the new ones to 160 inch pounds. Maybe I'll re-check them this summer.

[mm svt]

There are kits and had too use a couple of altered pullers and a shop press, https://uploads.tapatalk-cdn.com/20170305/68ba1ad9bd8cd4452739aed80e68d5 0a.jpghttps://uploads.tapatalk-cdn.com/20170305/8d08070787b242feb72d475c51f526 7c.jpg

I'm hopeful that the case is ok thohttps://uploads.tapatalk-cdn.com/20170305/66a3ef3a426d52839193edd89951f2 73.jpg

[RubberCtyRauder]

those look like standard heat checks from the die cast tool. common after so many 1300 degree aluminum, shots are run thru the tool. every die cast tool gets them, generally not an issue. I've built andcrrpaired die cast tools for 10 years before I went strictly plastic injection molds.

[mm svt]

Ah that's great information, we plan on reassembling this week waiting on a few more bronze shift fork pads

[mm svt]

Pulled the brake booster

https://uploads.tapatalk-cdn.com/20170305/79a9c2e40ba920d57fa90a6980179d dd.jpg

https://uploads.tapatalk-cdn.com/20170305/67cc4bcb71c88743376be80eb199e1 15.jpg

Guess I'll be rebuilding the master cylinder too

[mm svt]

Placing the marauder brake switch on the cobra pedals mounted on the marauder bracket

https://uploads.tapatalk-cdn.com/20170305/62a4a56f1a6b1a08f455a3910fc953 9e.jpghttps://uploads.tapatalk-cdn.com/20170305/077c9150df91aea5a11c4cd4e2e908 87.jpg

[justbob]

Finally replaced my custom fuel rails that I broke the mounts off of with nice new Aeromotives. No more leaks [emoji4]

Then I drove it around the block so I can say I drove it this week. [emoji1303]


Sent from my iPhone using Tapatalk

[cer0413]

Polish, wax, buff and added new headlights. https://uploads.tapatalk-cdn.com/20170306/4a2f0525ff17aa52a1a4d66e982bd5 67.jpg

Sent from my SM-G930P using Tapatalk

[justbob]

Polish, wax, buff and added new new headlights. https://uploads.tapatalk-cdn.com/20170306/4a2f0525ff17aa52a1a4d66e982bd5 67.jpg

Sent from my SM-G930P using Tapatalk



Holy shine! Better bring my #5 oxy/acetylene lens next time I actually show up to something LOL

My car hasn't been washed since last summer..


Sent from my iPhone using Tapatalk

[03Merc]

https://uploads.tapatalk-cdn.com/20170306/ac6492305d7287dd4ec77b275cbaa1 af.jpg

It was a little chilly out today about 68-70, so We went to the beach.


Sent from my iPhone using Tapatalk Pro

[lji372]

Well it's been a long time coming and with the cabin fever setting in I decided it was time to warm up the garage and boost blue.
Had help from trilogy, ups, Amazon, McMaster Carr, a couple members via texts etc., but most importantly my son and brother.
Still tying up loose ends but almost there.
Here are a few pics from along the way so far.
455574555845559455604556145562 4556345564

Fwiw cover open holes when handling bolts.
Dropped that M8x30 hex bolt and that sucker went straight into the cot hole. Talk about close calls :eek:
Sent from my iPhone using Tapatalk

[fordnut02]

Installed cooling mod this week
Replaced accumulator https://uploads.tapatalk-cdn.com/20170306/8b89494068e7b763fb50728d7223dc 88.jpghttps://uploads.tapatalk-cdn.com/20170306/ad9544e99bc008bcfa84ec9e4c68c1 42.jpg


Sent from my iPhone using Tapatalk

[mm svt]

Nice job, what's left? New tires.

[justbob]

Nice shot of the UPS guy Jerry!

But you mounted the Alt. backwards bro... [emoji6]


Sent from my iPhone using Tapatalk

[lji372]

Nice shot of the UPS guy Jerry!

But you mounted the Alt. backwards bro... [emoji6]


Sent from my iPhone using Tapatalk

He's quite photogenic but unfortunately he's taken. I asked if he could just be borrowed then but I didn't get an answer, weird......

[mm svt]

That's a maybe

[maximusslade]

I put leather seats from an '04 Town Car in the Vic. Soooo nice. To finish that job, I am going to have to wire in a switch and figure out the airbag wiring. Plugs and wire colors from an 03 P71 do not match that of an 04 Town Car, go figure.

[lji372]

Sent from my iPhone using Tapatalk45574

[mm svt]

Yep that looks nice, thumbs up

[silversnake]

Installed SS braided brake lines


Sent from my iPhone using Tapatalk

[loud2004marquis]

Replaced the drivers seat bottom cover in an F-150.

Before & After

[justbob]

Replaced the drivers seat bottom cover in an F-150.



Before & After



Nice! My 150's are soooo dry and cracking. A triple dose of conditioner helps but is short lived.


Sent from my iPhone using Tapatalk

[loud2004marquis]

A triple dose of conditioner helps but is short lived.

^^^I hear ya^^^

If you ever want to replace them, Richmond Auto Upholstery on Ebay has nice stuff. Perfect fit, color matching to your OEM trim code and even step by step videos!

[justbob]

^^^I hear ya^^^

If you ever want to replace them, Richmond Auto Upholstery on Ebay has nice stuff. Perfect fit, color matching to your OEM trim code and even step by step videos!


[emoji1303]



Sent from my iPhone using Tapatalk

[Baconbit]

Thought about selling it unfortunately.....found a 2017 Charger Scat Pack with one mile on it for $33K at a dealer 60 miles from me and its in Go Mango color. mmmmmmmm That's a hell of a deal for a scat pack that usually goes for around $40K.

[Mr. Man]

Thought about selling it unfortunately.....found a 2017 Charger Scat Pack with one mile on it for $33K at a dealer 60 miles from me and its in Go Mango color. mmmmmmmm That's a hell of a deal for a scat pack that usually goes for around $40K.You already own a tank. Where you live you need something that can handle and a Challenger in any guise ain't it. Start thinking Z/28 or GT350 or if you can find one a Boss Laguna Seca. In your neck o' the woods perhaps an RS Focus or similar.
:)

[primuspilum]

Stainless bumper letter inserts for my 2004.


http://i802.photobucket.com/albums/yy309/toecutter_01/IMG_3178_zpspnrsekun.jpg



Cleaned up a brand new fuel leak from my 2003. :eek:

http://i802.photobucket.com/albums/yy309/toecutter_01/16832050_10208523069737779_319 0891700645008110_n_zpsz76mnetv .jpg

Picked this up last night.

A couple thousand into it since I bought it last year trying to get it to run right.

The electrical system has been an issue since the day I bought the car. There was a fuel pump short, in addition to the leak, which is now fixed. Hopefully the electrical gremlin has finally been slain.

[Gerry24]

TINT JOB!!! Took off old tint from 03 and went new 3M as dark as they come. Looks fresh...

[StylinP]

https://uploads.tapatalk-cdn.com/20170312/095a26af35096ce0fb43987a890953 5e.jpg

Mounted some LED floods to the stock fog light brackets using some creativity and scrap sheet metal from the shop floor.

What an improvement!

https://uploads.tapatalk-cdn.com/20170312/cfed2bc39f04c784874ddc1829b7b7 9f.jpg


Sent from my iPhone using Tapatalk

[lji372]

Ordered big brake parts, a pioneer avic4200nex and a spoiler for blue.
Muth lights almost installed. Hopefully she'll make it in for paint correction in the next couple of weeks. :2thumbs:

[Curless]

Left it at home due to ****g SNOW... UGH... is it April yet?

[mm svt]

How much snow? We got 2" overnight and still going, all on top of ice.

[fastblackmerc]

Got about 1", gone by 3:00PM.

[larryo340]

Started tohave some play in the front hub bearings so I replaced them both using OEM assemblies.

http://i299.photobucket.com/albums/mm288/larryo340/My%20Marauder/E78464FF-E97D-473D-A31E-4D7E9890132C_zpsbciz5raf.jpg


http://i299.photobucket.com/albums/mm288/larryo340/My%20Marauder/3F1C58EF-3B6F-455F-AED7-31903F21171C_zpsxzhqkmng.jpg

the part number if anybody's interested...
http://i299.photobucket.com/albums/mm288/larryo340/My%20Marauder/9BDE15FC-B828-471C-9D4A-DA390AE87104_zpsqhhe5nd7.jpg

[justbob]

Started tohave some play in the front hub bearings so I replaced them both using OEM assemblies.



http://i299.photobucket.com/albums/mm288/larryo340/My%20Marauder/E78464FF-E97D-473D-A31E-4D7E9890132C_zpsbciz5raf.jpg





http://i299.photobucket.com/albums/mm288/larryo340/My%20Marauder/3F1C58EF-3B6F-455F-AED7-31903F21171C_zpsxzhqkmng.jpg



the part number if anybody's interested...

http://i299.photobucket.com/albums/mm288/larryo340/My%20Marauder/9BDE15FC-B828-471C-9D4A-DA390AE87104_zpsqhhe5nd7.jpg



They can be a real joy to get out on some can't they! Yours doesn't look as corroded as some that I've seen though.


Sent from my iPhone using Tapatalk

[Mr. Man]

First thing I've ever seen made in Cameroon.^^

[Curless]

Walked right by her... covered in snow again... 13 damn degrees this morning... ugh...

[2,4shofast]

Looked at it, thought about washing it. Had a beer instead.:banned:

[larryo340]

They can be a real joy to get out on some can't they! Yours doesn't look as corroded as some that I've seen though.


Sent from my iPhone using Tapatalk

It wasn't too bad, each side took about a half a dozen wacks with a BFH to get out, the knuckle picture was after I cleaned it up.


First thing I've ever seen made in Cameroon.^^
Me too, I'm ashamed to admit that I had to look up where Cameroon is :o

[lji372]

Drove her sideways out of the neighborhood!

:woohoo:

[primuspilum]

Gingerly removed a 3" thick white sheet of snowy looking ice.

And drove it to work.

[mm svt]

Picked up the block, yea

[cer0413]

Kicked ice off the chin spoiler

Sent from my SM-G930P using Tapatalk

[Turbo4v06]

added a spoiler

[Gerry24]

:hmmm:Looking at her in the garage contemplating should I jump on the watts link and control arms from Sparta Perfomance. :hmmm:

[Comin' in Hot]

:hmmm:Looking at her in the garage contemplating should I jump on the watts link and control arms from Sparta Perfomance. :hmmm:

Yes, they are great

[primuspilum]

Drove my 03 Marauder to Pepboys to buy some new (Michelin) wiper blades. Put on said blades.


Turned 30k on the odometer.


http://i802.photobucket.com/albums/yy309/toecutter_01/17264300_10208695721893975_568 2881617319638531_n_zpsvnp45p60 .jpg

[03Merc]

Drove my 03 Marauder to Pepboys to buy some new (Michelin) wiper blades. Put on said blades.


Turned 30k on the odometer.


http://i802.photobucket.com/albums/yy309/toecutter_01/17264300_10208695721893975_568 2881617319638531_n_zpsvnp45p60 .jpg



Do You have more pics of the green delete dash? Maybe at night time? I have one not sure if I wanna swap it out or not.


Sent from my iPhone using Tapatalk Pro

[fastblackmerc]

Do You have more pics of the green delete dash? Maybe at night time? I have one not sure if I wanna swap it out or not.


Sent from my iPhone using Tapatalk Pro

Looks like the green is still there.

[03Merc]

Looks like the green is still there.



Maybe by the odometer but not the MPH numbers....


Sent from my iPhone using Tapatalk

[SGT_MERC]

Dropped her off for her final tune.... Engine and trans

[WPG_Merc]

First start up of the year. :banana: https://www.youtube.com/watch?v=KvfRjhiGT4w

[03Merc]

Picked up some Corvette brake calipers. One step closer to Big Brake kit.


Sent from my iPhone using Tapatalk Pro

[primuspilum]

Looks like the green is still there.



it was converted by a prior owner.

honestly, i prefer the green which is still in my stock marauder

will post a pic at night


Sent from my iPhone using Tapatalk

[stevengerard]

cleaned off some bird poop :mad:

[loud2004marquis]

cleaned off some bird poop

Just the section with the bird poop or the whole car?

[stevengerard]

just the bird poop - its acidic:mad2:, will get to the whole car shortly - I hope

[primuspilum]

Do You have more pics of the green delete dash? Maybe at night time? I have one not sure if I wanna swap it out or not.


Sent from my iPhone using Tapatalk Pro



Used my ipotato to take this pic of my 03:

http://i802.photobucket.com/albums/yy309/toecutter_01/IMG_3266_zpsxuf1bp4w.jpg

vs stock in my 04:


http://i802.photobucket.com/albums/yy309/toecutter_01/IMG_2934_zpsi3n8t19m.jpg



Not a priority, but I really do want to return the OEM green look.

Plus, the delete looks bubba'd. Those bright spots aren't from the camera, the cluster is unevenly lit. And everthing below the cluster, with the execption of the aftermarket boost and oil pressure gauges (in the OEM volt and op positions) is still green.

Looks half done. Though, I'm glad it's half done, because the electrical system "upgrades" have been a nightmare un*****ing on this car.

[mm svt]

Completed the measurement process and then assembled the short block. tonight we put the head studs in and installed the heads, tomorrow will blueprint and install the oil pump and degree the cams

https://uploads.tapatalk-cdn.com/20170324/8490ef4ffa160f02960f8e02d0baf0 d1.jpg

https://uploads.tapatalk-cdn.com/20170324/7d2a82506089c6389f3c28abcbdee4 1c.jpg

[tbone]

I have a big list of spring projects coming up with new parts I bought over the winter and some years ago....

Wiper cowl
Rocker panel covers
Carpeting and sound insulation
Trunk/license decklid
SS brake lines
Kevlar brake pads
Ignition cylinder
Clips for center console gauges
Adjustable pedal gear
2 used like new rear tires, ditching the 15 year old spare

Win!

[justbob]

I have a big list of spring projects coming up with new parts I bought over the winter and some years ago....

Wiper cowl
Rocker panel covers
Carpeting and sound insulation
Trunk/license decklid
SS brake lines
Kevlar brake pads
Ignition cylinder
Clips for center console gauges
Adjustable pedal gear
2 used like new rear tires, ditching the 15 year old spare

Win!



You'll notice the sound deadening immediately. Plus it's actually fun as hell to do. Get a wooden roller. It really helps lay it down.

https://uploads.tapatalk-cdn.com/20170324/2deb1aac91239c513217771bded60a 82.jpg


Sent from my iPhone using Tapatalk

[tbone]

I took all the carpeting out of the trunk a couple years ago and sprayed it with undercoating to seal it and try to deaden sound. I wonder if the dynamat (Noico in my case) will stick to it?

[Rafael]

Finally got around to posting about my project. Rebuilt Eaton sitting on the lower intake for now. Jerrys brackets and COT came in the other day and was very impressed by the quality.

Jerry, YOU DA MAN!

Also installed the 4379 Autometer A/F gauge along with the boost gauge so that I don't have to deal with them later when I finally throw the project together.

Other than that, smooth sailing so far. Probably should make a new thread at some point with the progress I've made from start till finish.

[cer0413]

https://uploads.tapatalk-cdn.com/20170326/60e2ead289d01c7cf25050e2189b31 b3.jpg
https://uploads.tapatalk-cdn.com/20170326/9b3ed8a19c2cd214a5d5d6d17a702b cb.jpg
Rewired the a/f and boost gauges

Sent from my SM-G930P using Tapatalk

[fastblackmerc]

Cooling system flush, new belt, idler, tensioner, thermostat, heater hoses, upper and lower radiator hoses and oil & filter change for the wife's '07 Charger R/T @ 70k miles.

[fastblackmerc]

Foglights installed on the '98 Danger Ranger.

[mm svt]

Got the valve covers back from the powder coating and got the headers back from being ceramic coated

https://uploads.tapatalk-cdn.com/20170327/fb9cbae0b970123e505f7dd933834f e2.jpg

https://uploads.tapatalk-cdn.com/20170327/5abeaa7f356be2159a30e7c95166d1 09.jpg

[jflave]

They look good :2thumbs:

[mm svt]

Thank you, all four pieces cost $457. The headers were discounted but the custom color cam covers were extra

[mm svt]

Chiller came in, working on plumbing it.

https://uploads.tapatalk-cdn.com/20170327/55f2e2b2b20b5f7f1b7d122cebaed3 09.jpg

[MOTOWN]

Chiller came in, working on plumbing it.

https://uploads.tapatalk-cdn.com/20170327/55f2e2b2b20b5f7f1b7d122cebaed3 09.jpg

Best investment you can make!

[cer0413]

Added a pioneer. https://uploads.tapatalk-cdn.com/20170405/bca4e3e8590e0e887558673a7587ff a0.jpg

Sent from my SM-G930P using Tapatalk

[parker]

Added a pioneer. https://uploads.tapatalk-cdn.com/20170405/bca4e3e8590e0e887558673a7587ff a0.jpg

Sent from my SM-G930P using Tapatalk



How did you get the Marauder emblem and lettering in tue screen that looks cool.

[cer0413]

How did you get the Marauder emblem and lettering in tue screen that looks cool.
Thank you sir. Blackend300A did all the work resizing it. The deck i have needs a 800X480 jpeg pic to work and B300A has it right at 800X400ish. I can email you the photo but uploading it depends on your tv.

Sent from my SM-G930P using Tapatalk

[fastblackmerc]

How did you get the Marauder emblem and lettering in tue screen that looks cool.

Late model Pioneer headunits can display just about anything. Load it on an Micro SD card and select which one you want.

[FavianHerrera]

Added a pioneer. https://uploads.tapatalk-cdn.com/20170405/bca4e3e8590e0e887558673a7587ff a0.jpg

Sent from my SM-G930P using Tapatalk
Oh yes that is very nice!

Sent from my SM-G930T using Tapatalk

[Gerry24]

^^^:agree:^^^

[sparker_1982]

Obtained Grid pedal covers from fastblackmerc next is Heel plates and then sill plates which will all be installed at the same time once I collect them all lol

[Zim Hosein]

Added a pioneer. https://uploads.tapatalk-cdn.com/20170405/bca4e3e8590e0e887558673a7587ff a0.jpg

Sent from my SM-G930P using Tapatalk

How much of the dash behind the new head unit did you have to cut out er0413? Don't get me wrong, your install looks great :beer:, but I am personally hesitant to "modify" any part that I cannot undue. :confused:

[JBeezy]

You'll never see what you modify behind the radio, which isn't much. Go for it

Sent from my SAMSUNG-SM-G935A using Tapatalk

[camelgrundle]

What model is that pioneer? I am looking into one but really trying to find a cheap way to go aux or Bluetooth.

[JBeezy]

Not sure what model his was but I was like you, I just wanted a descent head unit for Bluetooth. I paid a little over $200 for my Pioneer double din. I'm happy with it. There are vendors here that can get you one for a good price I'm sure

Sent from my SAMSUNG-SM-G935A using Tapatalk

[camelgrundle]

Yeah that price range is what I am looking for. Thanks man

[03Merc]

Did an EGR Delete. It was leaky...


Sent from my iPhone using Tapatalk Prohttps://uploads.tapatalk-cdn.com/20170407/656d9cc9593bde79cbd7ccef53770f 31.jpg

[parker]

Nothing, Marty won't give my car back. #sadface

[RubberCtyRauder]

Nothing, Marty won't give my car back. #sadface

Got to give him some martyo bucks, sort of like monopoly money but not. :D

[parker]

Got to give him some martyo bucks, sort of like monopoly money but not. D:



It's almost done he's just putting the final touches on it hopefully get to pick it up soon.

[RubberCtyRauder]

mine is going there later this month

[parker]

mine is going there later this month



Better bring a lot of that monopoly money

[cer0413]

Windshield replaced.

Sent from my SM-G930P using Tapatalk

[jsignorelli]

Today I re-attached my rear spoiler. When the marauder came out of winter storage, the rear wing was loose. The dealership I purchased the car (new) from 13 years ago only used double sided tape to attach the wing. They never drilled and bolted it on.

In looking back, they saved my trunk from rusting around the holes, as there are none. My body shop friend and I spent about an hour cleaning off the old glue, and then applying the 50 mm wide double-sided, 3M foam body tape.
The wing is now good for another 13 years!

[ARodmarauder]

How much of the dash behind the new head unit did you have to cut out er0413? Don't get me wrong, your install looks great :beer:, but I am personally hesitant to "modify" any part that I cannot undue. :confused:



When I did mine I didn't have to cut anything out of it. I've had 2 different double dins with no modifications done to the car


Sent from my iPhone using Tapatalk

[mm svt]

https://uploads.tapatalk-cdn.com/20170409/47c0abe4a8e12b513da8146ac51a0b 8f.jpghttps://uploads.tapatalk-cdn.com/20170409/93cf23529d442b59dd1bbdf8b0cff3 23.jpg

Getting the long block done,

[Gerry24]

:up:Looking good

[mm svt]

Thanks, really wanted to have it ready for looseville, that's not happening. Mostly the machine shop really held us up, Oh and then I dropped the harmonic balancer about three inches and it broke a piece off it,

[jsignorelli]

Your engine looks spectacular. Good luck with it.

[SOSA03]

Decided to take my car out for a ride around the Riverside,Berwyn ,Cicero, and Oak Park area. I love how the exhaust sounds now ����

[cer0413]

*Replaced oem cop's
*blend door actuator replacement

Sent from my SM-G930P using Tapatalk

[SOSA03]

CJ what kind of cops, I heard it took 2 hours to do the blend door it's a new record Lol

[cer0413]

CJ what kind of cops, I heard it took 2 hours to do the blend door it's a new record Lol
Motorcraft and yes 2 hours while drinking a sprite and talking him into making me a pair of projectors lol.
https://uploads.tapatalk-cdn.com/20170409/52fb9f6f46b01f6fd24258549568fc a8.jpg because meh-he-can

Sent from my SM-G930P using Tapatalk

[justbob]

https://uploads.tapatalk-cdn.com/20170409/47c0abe4a8e12b513da8146ac51a0b 8f.jpghttps://uploads.tapatalk-cdn.com/20170409/93cf23529d442b59dd1bbdf8b0cff3 23.jpg

Getting the long block done,



Looks good. You notching the frame then?


Sent from my iPhone using Tapatalk

[mm svt]

No sir,

https://uploads.tapatalk-cdn.com/20170410/e7f7c4e9afe695bd98706ceb742534 fe.jpg

[mm svt]

https://uploads.tapatalk-cdn.com/20170410/e84b1da24aecdb4ca64119654caecd 4c.jpg

Buenos no notches

[mm svt]

https://uploads.tapatalk-cdn.com/20170410/c3086ed5d37c633c849d7c668f3065 d3.jpg

One more

[mm svt]

The egr tube gets wrapped and the crossover gets it finishing touches https://uploads.tapatalk-cdn.com/20170410/479a2da3decb9a6eeb6024ca1ca135 0c.jpg

https://uploads.tapatalk-cdn.com/20170410/a1cb8a4184a3a4bd25f7951e556541 a0.jpg

[justbob]

Never seen that bracket before? One off?


Sent from my iPhone using Tapatalk

[03Merc]

https://uploads.tapatalk-cdn.com/20170410/bb0979d1119f3caed5dde7c4b9a22e d8.jpghttps://uploads.tapatalk-cdn.com/20170410/812d2f9527a036c935432e8845de54 62.jpg

EGR delete, re-tuned. Starts and Runs way better. Thanks Marty. Nitrous Kit next I'm thinking...


Sent from my iPhone using Tapatalk Pro

[mm svt]

Get delete -That's still an option, it has worked fine so far, just the fire /heat Shield was hairy mess.

Bob, the bracket is the cobra one, that's a lot of extra stuff comparing to a trilogy install. The alternator is mounted to that and can be removed as one unit, but the alternates still comes out easy when in the car too

[03Merc]

Ordered Lokar dipstick...


Sent from my iPhone using Tapatalk Pro

[fastblackmerc]

Today I re-attached my rear spoiler. When the marauder came out of winter storage, the rear wing was loose. The dealership I purchased the car (new) from 13 years ago only used double sided tape to attach the wing. They never drilled and bolted it on.

In looking back, they saved my trunk from rusting around the holes, as there are none. My body shop friend and I spent about an hour cleaning off the old glue, and then applying the 50 mm wide double-sided, 3M foam body tape.
The wing is now good for another 13 years!

Still no screws? Drill holes, use touch up paint or silicone sealer on bolt holes.

[2,4shofast]

Drove the Marauder a little over 1600 miles in a 48hr period. It hasn't gotten a workout like that ever, hurt several feelings along the way. Set the cruise between 85-90 and ran for hours on end. This car never lets me down.:beer:

[1Marauder]

Drove the Marauder a little over 1600 miles in a 48hr period. It hasn't gotten a workout like that ever, hurt several feelings along the way. Set the cruise between 85-90 and ran for hours on end. This car never lets me down.:beer:


Was this your LA RUN? Your SLED is so SLICK!

I Love it. I had same issue headed to Marauderville XII with 2 older guys in a Jag and an Mercedes. Neither could stay with me over the mountains (hills) up outta Bakersrfield. They were seriously B*^TSORE about it. Both pulled over to check out the car when I stopped to get gas-- after they caught up from me leaving them behind 20 miles back.

[mm svt]

Today the interior got sound deadened ( interior was out already ), removed the front dress that we installed for possible changing the crossover tune and size omg up a extra idler to prevent slip.
Installed the flywheel, clutch, bellhousing and starter.

https://uploads.tapatalk-cdn.com/20170411/76ea3657280340e3787882a865ca9e f9.jpg

https://uploads.tapatalk-cdn.com/20170411/7443a8923e5dbf7a4b69578e465c2c 4b.jpg

[Gerry24]

You should start its own thread SVT...:burnout:

[stevengerard]

Decided to take my car out for a ride around the Riverside,Berwyn ,Cicero, and Oak Park area. I love how the exhaust sounds now ����

I did not see you

[cer0413]

....

Sent from my SM-G930P using Tapatalk

[2,4shofast]

Was this your LA RUN? Your SLED is so SLICK!

I Love it. I had same issue headed to Marauderville XII with 2 older guys in a Jag and an Mercedes. Neither could stay with me over the mountains (hills) up outta Bakersrfield. They were seriously B*^TSORE about it. Both pulled over to check out the car when I stopped to get gas-- after they caught up from me leaving them behind 20 miles back.


Yes Sir, It was way too short of a trip that is for sure but lots of fun. There was a nice CTS-V but traffic was still pretty heavy heading to Vegas at 2330. We need to plan something in Tahoe, I have at least one coming so far:burnout:

[Pat]

Gave the MM over to my son, the Honda mech, and he replaced the turn signal stalk assembly. Tricky he said. Got the part from ABC auto parts, OEM, $85.00, P/N SW6489.

He only charged me $25.00 labor plus his electric bill $52.00. a Lot less that the "stealership" labor rate.

[03Merc]

Ordered new Metco control arm bushings, Ricks wife is cool as ****! Sending Me a freebie item.


Sent from my iPhone using Tapatalk Pro

[03Merc]

Installed Lokar Dipstick. Thanks MOTOWN and MM SVT for the info!
https://uploads.tapatalk-cdn.com/20170413/11148f68c8681424306ce4a1b03503 c8.jpg


Sent from my iPhone using Tapatalk Pro

[mm svt]

Put the engine and transmission into place, got the driveshaft measurements

https://uploads.tapatalk-cdn.com/20170413/1fe28023687d0ffb2a11f16b07bf7a bb.jpg

https://uploads.tapatalk-cdn.com/20170413/bd32c8600006450b61cb4bfb56b277 f1.jpg

[JBeezy]

Where to get that dip stick? I like that

Sent from my SAMSUNG-SM-G935A using Tapatalk

[MOTOWN]

Where to get that dip stick? I like that

Sent from my SAMSUNG-SM-G935A using Tapatalk

Jegs or Summit has them.

[JBeezy]

Any special part number?

Sent from my SAMSUNG-SM-G935A using Tapatalk

[MOTOWN]

Any special part number?

Sent from my SAMSUNG-SM-G935A using Tapatalk

Lokar 5014

[JBeezy]

Got it thanks

Sent from my SAMSUNG-SM-G935A using Tapatalk

[03Merc]

Jegs or Summit has them.



The bay of eeee'z.


Sent from my iPhone using Tapatalk Pro

[03Merc]

https://uploads.tapatalk-cdn.com/20170415/a4a736ca100ddb0ba37294608d84b0 17.jpg

Installed LED trunk lights.


Sent from my iPhone using Tapatalk Pro

[mm svt]

Putting the super charger onhttps://uploads.tapatalk-cdn.com/20170415/51ec33feca1f62222b94cc3925741d 10.jpg

[justbob]

Putting the super charger onhttps://uploads.tapatalk-cdn.com/20170415/51ec33feca1f62222b94cc3925741d 10.jpg



Hurts my back to see that! I install the engine with the blower, most front dress, harness, headers, and anything else I can save on bending over for!


Sent from my iPhone using Tapatalk

[mm svt]

He's standing on the ground, inside the bay, still not sure of the best place to hook it to lift the the package without doing some damage

[loud2004marquis]

^^^Good stuff going on right there!^^^

I remember after mounting the supercharger, it started to really become a reality. The engine looks much larger with it on there!

What upper and lower pulley combo you going with?
What kind of exhaust do you have?

[03Merc]

https://uploads.tapatalk-cdn.com/20170415/a5a27b98c968d66ed8169bdc8d494c 18.jpg

Installed New Control Arm Bushings.


Sent from my iPhone using Tapatalk Pro

[WhatsUpDOHC]

https://uploads.tapatalk-cdn.com/20170415/a4a736ca100ddb0ba37294608d84b0 17.jpg

Installed LED trunk lights.


Sent from my iPhone using Tapatalk Pro

Looks good! Where did you get them?

Easy to wire/install?

Sent from my SM-G900V using Tapatalk

[WhatsUpDOHC]

Dropped the SB off for 4:10 install.

Sent from my SM-G900V using Tapatalk

[03Merc]

Looks good! Where did you get them?

Easy to wire/install?

Sent from my SM-G900V using Tapatalk



Bay of eee'z. Yes very easy to inatall. Just tap into the existing trunk light.


Sent from my iPhone using Tapatalk Pro

[mm svt]

^^^Good stuff going on right there!^^^

I remember after mounting the supercharger, it started to really become a reality. The engine looks much larger with it on there!

What upper and lower pulley combo you going with?
What kind of exhaust do you have?



There's a stock cobra lower pulley and a billetflow 3.4 up top for start up, then we'll see what combo works best after that, the headers are kooks long tube w/ x pipe, big 10 mufflers and.stainless works tail pipes and tips.

Didn't get to start it today as we had a wedding to attend and tomorrow probably won't be able to do anything, "sigh"

[cer0413]

Dropped arm rest cover off to the upholstery shop

Sent from my SM-G930P using Tapatalk

[03Merc]

https://uploads.tapatalk-cdn.com/20170418/25dd631f42ed9385a425a75d8d9f5c 07.jpg

Picture of the trunk lights. I guess I could have only put one. Oh well.


Sent from my iPhone using Tapatalk Pro

[Gerry24]

^^^:coolman:^^^

[mm svt]

https://uploads.tapatalk-cdn.com/20170418/25dd631f42ed9385a425a75d8d9f5c 07.jpg

Picture of the trunk lights. I guess I could have only put one. Oh well.


Sent from my iPhone using Tapatalk Pro



I need those for back up lamps

[MunsterBro95]

https://uploads.tapatalk-cdn.com/20170418/25dd631f42ed9385a425a75d8d9f5c 07.jpg

Picture of the trunk lights. I guess I could have only put one. Oh well.


Sent from my iPhone using Tapatalk Pro

Where did you get them?

[03Merc]

Where did you get them?



The bay of eee'z.


Sent from my iPhone using Tapatalk

[cer0413]

Reinstalled my freshly wrapped arm rest.

Sent from my SM-G930P using Tapatalk

[camelgrundle]

You have been busy!^... you are starting to motivate me.

[JBeezy]

Had the Nitto 305's mounted

Sent from my SAMSUNG-SM-G935A using Tapatalk

[cer0413]

You have been busy!^... you are starting to motivate me.
Lol. Ive neglected it for years before i joined the forum now im just playing catch up. Next installs are.....
T/A girdle
Big brake kit
Matching rear rotors
Custom gauge pod
Re-tune (higher #s)
Badgless grill





Sent from my SM-G930P using Tapatalk

[fastblackmerc]

I need those for back up lamps

I have 15Watt HIDs (backup lenses) and a couple of 15Watt eagle eyes in the license plate frame for backup lamps

[jsignorelli]

I just completed installing LED lights in the instrument cluster and behind the dash gauges. To use the current phrasing: It Looks Sweet!

[MOTOWN]

Ended up painting the Silver car almost entirely (except roof and trunk) to get the color to match ,Class Glass cowl hood needed quite a bit of work to get it straight , now its on to the 9" rear end fabrication.

[mm svt]

As much as we can,

https://uploads.tapatalk-cdn.com/20170422/913f0d6a486bfca6223168f127a076 e7.jpg

https://uploads.tapatalk-cdn.com/20170422/87732162af35a39afe4f02d1a7a71c 9a.jpg

https://uploads.tapatalk-cdn.com/20170422/92895501cb482c926fcfe9e5b73c90 28.jpg

[Dragcity]

I took mine out of its Looooong winter storage. Does that count?

[cer0413]

Worked on my launch.

Sent from my SM-G930P using Tapatalk

[primuspilum]

dupe and or doubletap

[primuspilum]

Picked this up last night.


http://i802.photobucket.com/albums/yy309/toecutter_01/16832050_10208523069737779_319 0891700645008110_n_zpsz76mnetv .jpg

A couple thousand into it since I bought it last year trying to get it to run right.

The electrical system has been an issue since the day I bought the car. There was a fuel pump short, in addition to the leak, which is now fixed. Hopefully the electrical gremlin has finally been slain.



Shook my fist at this ***** for leaking fuel again. :mad2:

[mm svt]

Completing some finial touch ups, had a new pulley that was out of round, made me think the belt was too tight but it's the same but new stuff

https://uploads.tapatalk-cdn.com/20170425/23b23cd92f3913fc3ea6db162ed084 26.jpg

[BUCKWHEAT]

Took out the 13,000 mile OEM converter and put in a new Circle D 9-incher. Looking for better 60 foot times. Need to go to the track & try it.

Anyone want the Ford unit? PM...

[Gerry24]

Completing some finial touch ups, had a new pulley that was out of round, made me think the belt was too tight but it's the same but new stuff

https://uploads.tapatalk-cdn.com/20170425/23b23cd92f3913fc3ea6db162ed084 26.jpg

That is looking FRESH:beer:

[03Merc]

https://uploads.tapatalk-cdn.com/20170426/191a5edf534cfb54b645325d17c541 30.jpghttps://uploads.tapatalk-cdn.com/20170426/590e391e153e960d698336b1bcd30c a6.jpg

Got some interior pieces painted.


Sent from my iPhone using Tapatalk Pro

[DEFYANT]

Today I walked past Defyant Marauder in the garage. Dirty and needing a bath.

[Gerry24]

Installed chin spoiler, polished chrome tips, upgraded fog lights and oil change.

Today 4/28/17 Installed blue LEDs in the interior, installed new taillights with new bulbs, led reverse lights and led plate light.

[camelgrundle]

Took it out of storage and changed oil in motor and s/c, good time of the year!

[mm svt]

https://uploads.tapatalk-cdn.com/20170426/191a5edf534cfb54b645325d17c541 30.jpghttps://uploads.tapatalk-cdn.com/20170426/590e391e153e960d698336b1bcd30c a6.jpg

Got some interior pieces painted.


Sent from my iPhone using Tapatalk Pro



Those look nice, I'd like to get that trim ring in the gun metal color of the console

[stevengerard]

I had a high school baseball player put a dent in my hood with a foul ball while watching a soccer game. And that is after I moved the car farther away once i noticed the boys started to play baseball. :mad::mad2::shake:

[fastblackmerc]

Those look nice, I'd like to get that trim ring in the gun metal color of the console

I can do that for you.

[fastblackmerc]

had a fellow MM.net member drop off his Marauder so I could fix his EATC and LCM.