View Full Version : Metco Motorsports Has Made Eaton Swaps Easier For Marauder Owners!
Im proud to be able to bring you this great news!
After just 2 short days, 1 phone call and a few emails, Rick from Metco Motorsports has provided a unique part # for some necessary components needed to Eaton Swap your Marauder.
The parts made available by Metco are pictured here:
http://www.metcomotorsports.com/prodimages/large/MMC0001-1.jpg
You now have an easy, one stop shop for these sometimes hard to find parts on Mustang Classified sites.
Most used Cobra Lower pulley kits cost between $275 and $350 depending on the deal you can find. (You dont even need 75% of the Cobra Lower Pulley Kit anyways!)
Average price for an upper pulley and hub is $120.
..and these prices do not include shipping!
Now you can make a few clicks or a phone call and know you are getting top quality parts, with new fasteners and NO GUESSWORK.
No more searching for the right size upper or lower!
I feel Rick priced these parts very well, and again Id like to thank him publicly for taking the time to do this for us. :beer:
Here is the direct link:
http://www.metcomotorsports.com/proddetail.asp?prod=MMC0001
You might notice that the upper pulleys offered go to a max diameter of 3.0. This is actually a good thing! No hood or hood insulator modification is needed with a 3.0. Rather than a common 4lb lower, you would just step down to a stock size or +2 depending on what boost level you want to run.
Get started guys! Remember, a homemade Eaton swap comes to an average of $2800-$3500 depending on the price of used parts you find out there. :burnout:
dohc324ci
02-17-2010, 01:15 PM
Zack Awesome man!
Loren (69428SCJ) your Eaton swap just got easier.
Speed
02-17-2010, 01:44 PM
Ain't this some :bs:..., now I'm really :mad2:at myself :censor:.
Thanks Zack you the man.
SC Cheesehead
02-17-2010, 02:05 PM
You ARE the MAN! :2thumbs:
bawazir
02-17-2010, 02:11 PM
Zack have done it again, your the Man!
Zack have done it again, your the Man!
Get your cc ready, you need this stuff.
ImpalaSlayer
02-17-2010, 02:36 PM
price is meh. i bought a lfp lower kit for 300 new took what i needed and sold the rest for 75 bucks. then bought a steeda pulley for 70 from AM
musclemerc
02-17-2010, 02:42 PM
Let me get in line and say Thanks Zack! Good looking out...
There is no doubt in my mind you can score some awesome deals on used stuff.
Problem is, there are no guarantees at any given moment. Sometimes weeks, if not months go by before you strike gold.
ImpalaSlayer
02-17-2010, 02:44 PM
Let me get in line and say Thanks Zack! Good looking out...
don t get me wrong, its definitely cool to just be able to go to the site and order exactly what you need!
ImpalaSlayer
02-17-2010, 02:55 PM
should also say the pulley i bought is not inter changeable.
babbage
02-17-2010, 03:00 PM
So can this whole eaton kit be bought new? I'd like to see a "turn key" kit that's brand new with directions.
Or would a Trilogy be less expensive?
I'm probably going to stay N/A as I'll be very happy with mid 13's and long tubes will get me there.
ImpalaSlayer
02-17-2010, 03:01 PM
So can this whole eaton kit be bought new? I'd like to see a "turn key" kit that's brand new with directions.
Or would a Trilogy be less expensive?
I'm probably going to stay N/A as I'll be very happy with mid 13's and long tubes will get me there.
its been available for years, its called a trilogy. BUILDING my kit was one of the funnest parts for me.
bawazir
02-17-2010, 03:07 PM
Get your cc ready, you need this stuff.
Just ordered mine, +2 ib Crank Pulley & 3.0 Ring. and i got them all in polished aluminum for the same price :)
Kentucky here i come :) :burnout:
Thanks Zack
This is great news!!!
Hopefully now we will see alot more marauders getting S/C!!! :burn: :burnout:
bawazir
02-17-2010, 03:15 PM
Get your cc ready, you need this stuff.
This is great news!!!
Hopefully now we will see alot more marauders getting S/C!!! :burn: :burnout:
Thanks Doom!
RR|Suki
02-17-2010, 03:23 PM
This is great news!!!
Hopefully now we will see alot more marauders getting S/C!!! :burn: :burnout:
More S/C Marauders on the road the better. The NA ones are embarrassingly slow :D
More S/C Marauders on the road the better. The NA ones are embarrassingly slow :D
Muhahahaaa!! I was thinking to myself right before I got to your post I'm going to have to buy another frickin Marauder now just so I can supercharge one and stop running N/A.
bob6364
02-17-2010, 05:34 PM
I'll update the list :) Thanks zack
burt ragio
02-17-2010, 06:26 PM
What is the depth measurement on the crank pulley from where it mounts to the outside of the ring ?
What is the depth measurement on the crank pulley from where it mounts to the outside of the ring ?
HUH? :confused:
FordNut
02-17-2010, 06:32 PM
What is the depth measurement on the crank pulley from where it mounts to the outside of the ring ?
HUH? :confused:
Ya know, so he can make his own!
69428SCJ
02-17-2010, 07:08 PM
Kick Ass! This is good news for me...now if only that Whipple for my Cobra could get here sooner :(
guspech750
02-17-2010, 07:14 PM
Lets all give Zack a full body massage!! Im first.
Awesome Info as usual from the man himself.
Lets all give Zack a full body massage!! Im first.
Awesome Info as usual from the man himself.
Ill let my minions handle this one. :lol:
Kick Ass! This is good news for me...now if only that Whipple for my Cobra could get here sooner :(
You order from Tousley Ford?
I just picked mine up at the trucking terminal today.
:woohoo:
babbage
02-17-2010, 07:55 PM
More S/C Marauders on the road the better. The NA ones are embarrassingly slow :D
zero to sixty in 5.2 seconds [ my N/A MM ] is embarrassing? :eek:
I couldnt even imagine driving a NA Marauder....EVER AGAIN!
RR|Suki
02-17-2010, 08:01 PM
I couldnt even imagine driving a NA Marauder....EVER AGAIN!
My thoughts exactly
I couldnt even imagine driving a NA Marauder....EVER AGAIN!
:agree: :beer:
burt ragio
02-18-2010, 05:39 AM
The pulley used for the eaton conversion from Metco or Lightning if you lay it on a flat surface what does it measure from inside to outside ?
Speed
02-18-2010, 06:39 AM
I couldnt even imagine driving a NA Marauder....EVER AGAIN!
I hope to soon know that feeling...in mean while I can only dream about :burn:that feelling.
Joe Walsh
02-18-2010, 06:43 AM
The NA ones are embarrassingly slow :D
Mine does embarrass 13 second S/C Marauders!
I couldnt even imagine driving a NA Marauder....EVER AGAIN!
It's not so bad....:D
BTW: Welcome back Zack! Glad to see that you were granted a 'reprieve'. :beer:
Holy crap, it's Joe!:banana2:
Mine does embarrass 13 second S/C Marauders!
It's not so bad....:D
BTW: Welcome back Zack! Glad to see that you were granted a 'reprieve'. :beer:
69428SCJ
02-18-2010, 06:41 PM
You order from Tousley Ford?
I just picked mine up at the trucking terminal today.
:woohoo:
Negative, haven't even bought it yet. I've up to my ass in project alligators. I hope to sometime this year have it though. I was looking to buy the 3.4l at lethal performance. Can Tousley beat they price Lethal's advertising?
Tousley cant sell a 3.4.
However, the 2.3's are 3209 shipped :D
Dont buy a 3.4 unless you have a big inch engine or plan on running 23+psi.
Just my .02
69428SCJ
02-18-2010, 06:56 PM
The shop that built my Cobra said they built the engine for the 3.4. Engine size is 5.0, I'll discuss it with them to see what they say.
TAKEDOWN
02-18-2010, 07:53 PM
Nice job as usual Zack!
Kennyrauder
02-18-2010, 08:08 PM
I had already prepaid for my Vortech with DR. I drove Claudes Trilogy when we were down.They are 2 totally different animals... both are great.
JohnE
02-21-2010, 07:14 AM
Here's a picture showing the Trilogy crank pulley. What is the offset of the Metco Marauder/Cobra pulley? Can anyone post a picture?
John
FordNut
02-21-2010, 08:00 AM
Here's a picture showing the Trilogy crank pulley. What is the offset of the Metco Marauder/Cobra pulley? Can anyone post a picture?
John
It's about 1/4" farther out.
65DOHCStang
02-21-2010, 03:58 PM
blankblank
bawazir
02-22-2010, 12:21 PM
Just got them today :banana2:
http://www.mercurymarauder.net/gallery/data/500/medium/IMG_44701.JPG (http://javascript<b></b>:;)
http://www.mercurymarauder.net/gallery/data/500/medium/IMG_4478.JPG (http://javascript<b></b>:;)
http://www.mercurymarauder.net/gallery/data/500/medium/IMG_4466.JPG (http://javascript<b></b>:;)
http://www.mercurymarauder.net/gallery/data/500/medium/IMG_4471.JPG (http://javascript<b></b>:;)
http://www.mercurymarauder.net/gallery/data/500/medium/IMG_4475.JPG (http://javascript<b></b>:;)
http://www.mercurymarauder.net/gallery/data/500/medium/IMG_4473.JPG (http://javascript<b></b>:;)
http://www.mercurymarauder.net/gallery/data/500/medium/IMG_4474.JPG (http://javascript<b></b>:;)
http://www.mercurymarauder.net/gallery/data/500/medium/IMG_44832.JPG (http://javascript<b></b>:;)
Zack have done it again :)
RR|Suki
02-22-2010, 12:26 PM
This thread almost makes me want to put a whipple on my car.
This thread almost makes me want to put a whipple on my car.
Mine just came in last Thursday :D
But its for the Cobra. My Blue MM just got a Posi Performance Eaton :beer:
RR|Suki
02-22-2010, 12:43 PM
Mine just came in last Thursday :D
But its for the Cobra. My Blue MM just got a Posi Performance Eaton :beer:
Those ported eatons can support 560 or so whp on pump gas, no spray ya?
Those ported eatons can support 560 or so whp on pump gas, no spray ya?
Stock motor. :D
bawazir
02-22-2010, 12:47 PM
Mine just came in last Thursday :D
But its for the Cobra. My Blue MM just got a Posi Performance Eaton :beer:
Zack did she gave you all polished parts?
Kristi from Metco didn't charged me extra for them.
Zack did she gave you all polished parts?
Kristi from Metco didn't charged me extra for them.
I never ordered anything from Metco, I got all my stuff used for my car, and coincidentally it was just a tad less then what you paid for everything new.
cougar9150
02-22-2010, 01:07 PM
So obviously if I had an Eaton with a quick change pulley kit on it already then I would only need the crank portion of this kit correct? Found a used Metco lower recently that I may just snatch up if it is still available.
So obviously if I had an Eaton with a quick change pulley kit on it already then I would only need the crank portion of this kit correct? Found a used Metco lower recently that I may just snatch up if it is still available.
That is correct.
ImpalaSlayer
02-22-2010, 02:40 PM
why the hell did you get a polish lower and not an upper? you can even see the lower when its in the car!
nomad
02-22-2010, 03:17 PM
Just got them today :banana2:
Zack have done it again :)
You're near Dom,right? Have him help you install everything.
Take LOTS of pictures.:up::up:
bawazir
02-22-2010, 05:56 PM
Thanks, but Zack is the man for this job, he's getting them installed
bawazir
02-22-2010, 06:01 PM
why the hell did you get a polish lower and not an upper? you can even see the lower when its in the car!
Hummmm! damn that is a good point. but i dont know why?
-Matt-
02-22-2010, 06:20 PM
why the hell did you get a polish lower and not an upper? you can even see the lower when its in the car!
Wa wondering the same thing. :confused:
jdenning002
02-26-2010, 11:47 AM
So which pully sizes are safe with a stock motor?
FordNut
02-26-2010, 12:02 PM
I can't help you there, I believe most folks go with a +2. I'd like to find somebody who has a stock size that decided to upgrade and wants to sell the stocker for cheep...
The Whipple is running a 6.55" pulley which is approximately -3 or maybe -4.
I can't help you there, I believe most folks go with a +2. I'd like to find somebody who has a stock size that decided to upgrade and wants to sell the stocker for cheep...
The Whipple is running a 6.55" pulley which is approximately -3 or maybe -4.
Im pretty sure a member by the name of KingKiller on MF has one for sale
ImpalaSlayer
02-26-2010, 01:02 PM
So which pully sizes are safe with a stock motor?
if i were to do it again, id go +2 lower with a stock upper. or a stock lower with a 3.4 upper
if i were to do it again, id go +2 lower with a stock upper. or a stock lower with a 3.4 upper
You could always adjust your bypass valve open a hair....
jdenning002
02-26-2010, 01:15 PM
if i were to do it again, id go +2 lower with a stock upper. or a stock lower with a 3.4 upper
what should that produce to the rear wheels?
what should that produce to the rear wheels?
420
^^^ haha where is the pot plant picture? :lol:
ImpalaSlayer
02-26-2010, 01:19 PM
what should that produce to the rear wheels?
should make 12psi ish
should make 12psi ish
I have a 3.1/4lb and it makes a hair over 12.
Seems all MM's are different, lol
ImpalaSlayer
02-26-2010, 01:21 PM
I have a 3.1/4lb and it makes a hair over 12.
Seems all MM's are different, lol
weird, i used a 3.1 and a +2 and made 14..... Tom used a 3.1 and and a +4 and made 16.
jdenning002
02-26-2010, 01:25 PM
great, thanks guys.
I just bought a super clean 03 300B with 42k on the clock for a member on here...
I am gonna wait a bit and do the eaton install in the spring.
I just bought an m112, lower intake and intercooler, I need to assemble the rest over the next few weeks...
ImpalaSlayer
02-26-2010, 01:26 PM
great, thanks guys.
I just bought a super clean 03 300B with 42k on the clock for a member on here...
I am gonna wait a bit and do the eaton install in the spring.
I just bought an m112, lower intake and intercooler, I need to assemble the rest over the next few weeks...
nice, its alota fun
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.