PDA

View Full Version : Auto-X Brake Pads


crouse
02-26-2010, 11:32 AM
Those of you that Auto-X and run the stock rotor size, what are you running for rotors and brake pads? I don't care about dust or noise, I just want a pad that won't fad. I've already checked with Todd at TCE and he doesn't sell anything for the stock rotors. Any info would be appreciated.
SVT_MERC
02-26-2010, 02:37 PM
I was running my stock size rotors on my car, but they were baer decella-rotors, and I was using the baer pads on it as well. They worked fantastic for me. The 3 AutoX's I went to back in PA I won a 2nd and a 1st on my ride
Todd TCE
02-28-2010, 09:10 AM
Try these:
http://www.google.com/products?hl=en&client=firefox-a&hs=AcR&rls=org.mozilla:en-US:official&q=raybestos+brutestop+pads&oq=&um=1&ie=UTF-8&ei=aJWKS4nUJYryswPTiZiFAw&sa=X&oi=product_result_group&ct=title&resnum=3&ved=0CCQQrQQwAg
Vortech347
03-03-2010, 01:27 PM
R1 ebay rotors and Hawk pads. Had that on my 03 and stopping quality was epic!!! No warpping either.

I run R1 stuff on My fox and 01' cobra all with Hawks HPS pads. For any kind of performance driving its the only way to go with stock size hardware.
musclemerc
03-03-2010, 01:45 PM
Powerslot DS rotors and Hawk HPS pads. No problem stopping!
Sully008
03-03-2010, 03:20 PM
Powerslot DS rotors and Hawk HPS pads. No problem stopping!

I will be running this combination this spring, but slotted only. Changing both front and rear discs/pads and putting in TCE SS brake lines front/rear. Sounds like I made the right choice.
musclemerc
03-03-2010, 03:37 PM
AAHHH! I forgot to mention the TCE brakelines! Got those too.
Black_Noise
03-03-2010, 07:02 PM
i ran stock rotors and pads with 50K on them this last summer, worked just fine.
JimP
03-04-2010, 09:44 AM
I have had fantastic success with Performance Friction. I have these on my MM and, my dd 03 Impala ( which used to warp rotors every 6 months, Ac Delco, Raybestos etc.....)

We use them on all of the cruisers at work once the OEM stuff is gone. I have gotten these rotors red hot, you could see the glow through the rims on some of the cruisers. They don't seem to warp and last under these conditions. Check it out
www.performancefriction.com
pantheroc
03-04-2010, 10:55 AM
I was recommended to go with Carbotech if I was to get more serious with Auto X.

http://www.ctbrakes.com/pads.asp?Make=Ford

http://www.ctbrakes.com/